Radio Control

Commander - A free application that controls up to 4 Alinco, Elecraft, FlexRadio, Icom, JST, Kachina, Kenwood, TenTec, or Yaesu transceivers, switching between them manually or automatically based on frequency, and displaying frequency-dependent settings for devices like tuners and amplifiers; includes a bandspread, and supports transverters, frequency and mode tracking by an independent transceiver or receiver, SDR-based panadaptors, and SO2R switching with microHam or OTRSP-compliant devices.

Ham Radio Deluxe v4 - HRD v4 is a freeware windows multi function software, includes logbook, CAT Control software for Elecraft, Kenwood, ICOM, Ten-Tec and Yaesu radios, rotor controls, digital mode rtx, rotor control, dx cluster client and many more features by HB9DRV

VisualRadio - Interactive Webradio Software under Windows for most receivers/transceivers available today.

FTBCAT Cat radio control software - Free CAT control software for Yaesu FT-100, FT-100D, FT-817, FT-817ND, FT-847, FT-857, FT-857D, FT-897, FT-897D, FT-920, FT-1000MP Mark V, VR-5000 and FRG-100 transceivers.

RadioCommander 2052 - Radio control program for windows by kd5lmy

TRX-Manager HAM Radio CAT Software - TRX-Manager allows control of most radios on the market and features many original features. By Laurent Labourie F6DEX

RadioControl - 32-bit Windows software to control multiple radios simultaneously. Beside direct control, it also features frequency and memory management and various scan options. Supported radios range from AOR to Icom and WiNRADiO.

ARCS II - TS-2000 control - Amateur Radio Control System for the Kenwood TS-2000 by WB5KIA

RadioComm - RadioComm can be used to program your Icom radio's memory, or to create nice radio-frequency spectra (see above) or to interface your radio to a huge database of frequencies.

Antenna Rotator System - The ARS will allow to control any antenna rotator (Azimuth & Elevation) from a computer. Even if you are only interested on HF arrays, the ARS will allow it. Supported from most programs as CT for DOS, tracking programs.

FTBasic - FTBasic is a CAT control program for Yaesu radios FT100, FT817, FT847, FT1000MP Mark V and FRG100

Grig Radio Control - Grig is a freeware simple Ham Radio control (CAT) program based on the Ham Radio Control Libraries (Hamlib). It is intended to be highly generic presenting the user to the same graphical user interface regardless of which radio is being controlled. Grig supports the most commonly used CAT commands that are implemented by Hamlib, and integrates well with other ham radio programs like Xlog and gMFSK. Grig has been developed on Linux, but has been ported on Mac and Windows OS.

FT857 SuperControl - CAT control and logging software project especially developed for the YAESU FT-857 transceiver. Full control of the trcvr, EEPROM modification, VoIP, TCP/IP remote control, macro CW keyer, visual band scope

BuTel Software - Software Information PC Interfaces for the scanning radio hobbyist & professional radio control applications

FT897 SuperControl - CAT control and logging software project especially developed for the YAESU FT-897 transceiver. Full control of the trcvr, EEPROM modification, VoIP, TCP/IP remote control, macro CW keyer, visual band scope

FT-817 Commander - The ultimate free CAT program for the Yaesu FT-817

Control CAT FT 847 - Control software for Yaesu FT-847

Kenwood TS-570D RCP-2 software - Download Kenwood's free radio control software for the TS-570 HF

Icom CAT Control - CAT Control for Icom IC-706-IC706MKII-IC706MKII/G and IC-7000 with MEMORY management

SOFT990 - SOFT990 is a freeware designed for the transceiver YAESU FT-990. Running also with FT-840 FT-890 FT-900 FT-920 FT1000MP FT-1000D

KMIJ Kenwood Remote Control for TS-850/TS-450 - Windows radio control software for the Kenwood TS-850S and TS-450S HF Rigs. Originally released as shareware, there is a version that is now Freeware, with free registration upon request. Old program by VE3MIJ

Spectrum Commander - Scan*Star Spectrum Commander is the software of choice for radio enthusiasts who desire advanced computer control, comprehensive database management features and support for a wide range of radios and decoders.

All in One by WD8KNC - Windows based contest logging software with multiple functions like antenna rotor control, dx cluster, cat control, voice and cw keying, supports many data modes, qrz lookup, pirint qsl and labels, mapping and more

FT847-SuperControl CAT - FT847-SuperControl is a CAT software especially for the FT-847 transceiver from YAESU. You can download a trial version.

FT-817 Commander download support site - The official FT-817 Commander and PSK31 Deluxe download support site.

TH-D7 control program - This software allows you to control TH-D7 radio functions in real time, using a windows interface. This software will graph current activity of any 4mhz range, allowing the user to mouse click any active portion - automatically changing the radios frequency.

ICOM Rig Control - Freeware amateur radio transceiver control program tested with IC-756 Pro.

Easy VX-5R Editor - The Yaesu VX-5R editor

FT857 SuperControl - CAT control and logging software project especially developed for the YAESU FT-857 transceiver. Full control of the trcvr, EEPROM modification, VoIP, TCP/IP remote control, macro CW keyer, visual band scope

FT897 SuperControl - CAT control and logging software project especially developed for the YAESU FT-897 transceiver. Full control of the trcvr, EEPROM modification, VoIP, TCP/IP remote control, macro CW keyer, visual band scope

FTB8900 - Memory management (cloning) software for the Yaesu FT-8900R quad band FM mobile transceiver

FTBVR5K VR-5000 Radio control - Memory management programming software for the Yaesu VR-5000 receiver

Grig - Grig is a simple Ham Radio control (CAT) program based on the Ham Radio Control Libraries (Hamlib). It is intended to be highly generic presenting the user to the same graphical user interface regardless of which radio is being controlled.

Grig Radio Control - Grig is a freeware simple Ham Radio control (CAT) program based on the Ham Radio Control Libraries (Hamlib). It is intended to be highly generic presenting the user to the same graphical user interface regardless of which radio is being controlled. Grig supports the most commonly used CAT commands that are implemented by Hamlib, and integrates well with other ham radio programs like Xlog and gMFSK. Grig has been developed on Linux, but has been ported on Mac and Windows OS.

Ham Radio Deluxe Logbook - HRD Logbook v5 is a freeware windows logbook program that offer full control of your radio, Rotor control, support for many db engines, multiple logbook, dx cluster client interface, band maps and solar status report and audio recording

HamPort - A Free windows, universal program for RIG control, can read and set mode and frequency on your transceiver. The program can control ICOM, Yaesu and Kenwood transceivers, by DXSoft

HamStationUltra - The HamStationUltra package for Windows is designed specifically for the Kenwood TS-2000, Yaesu FT-2000 and Ten-Tec Jupiter/Pegasus transceivers.

HugeIcom - This is a very simple program which helps visually handicapped people to see the frequency and mode of the rig. Or maybe it's useful for demos, trade shows or similiar. It will work with any Icom except the IC-735.

IC-746 soft control by IW2BSQ - IC-746 radio control program in italian and personale info

IC7000BKT - IC7000BKT Icom IC-7000 CAT Control by IZ2BKT

IC7000BKT Icom IC-7000 CAT Control - CAT Control for Icom IC-7000 for windows. Management and synchronization of all memory bank, Management filters, volume, tones, DUP, DTCS, import export, audio recording and log frequency and signal,Auto CQ audio for repetitive calls

IC7000BKT Icom IC-7000 CAT Control - CAT Control specific for Icom IC-7000 allows managing filters and all the commands of the RTX. Includes a function to synchronize and manage all the memories of the IC-7000.

IC706 CAT Control - Icom IC-706 Cat control program, tested with Icom models 706, 706MKII, 706MKII/G and IC718 transceivers by IZ2BKT, Mauro.

IC706_BKT Icom 706 CAT Control - CAT Control for Icom IC706-IC706MKII and IC706MKII/G

IC746 control - IC-746 control It’s as simple as point and click. Left click will turn counter clockwise, and right click will turn clockwise.

Icom CAT Control - CAT Control for Icom IC-706-IC706MKII-IC706MKII/G and IC-7000 with MEMORY management

ICOM OCX - CI-V OCX For The Icom 756Pro allow you to interface your own application or visual basic, excel, word or similar custom applications to your icom radio.

ICOM Rig Control - Freeware amateur radio transceiver control program tested with IC-756 Pro.

IcomControl for PCR1000 - Icomcontrol a controller program for the icom pcr1000.

ILGdb - Free program that interfaces most ICOM radios with the ILG radio frequencies database and lets you click a station in the database to tune your radio to the station, or scan the list looking for stations that are on the air.

IP1kC - Control the Icom PCR 1000 receiver with a palmOS device

K2Net - K2Net is a remote operation windows software for the Elecraft K2, and allow remote control over internet or wi-fi networks by G4ILO

K3 and K2 Software - K3 and K2 Control Software

KC2IVL - FT100 for Linux - Yaesu FT-100 radio control software for linux

KE7ATE - VR-5000 Signal Capture and Analysis Software - Give your VR-5000 a new face. Controls your VR-5000, Log stations, Manage frequency lists, Record Audio and more. This program utilizes a more visual approach to simplify your radio listening.

Kenwood TH-D7 - tkD7 - tkD7 is an expectk script for controlling the Kenwood TH-D7 HT on Linux or FreeBSD

Kenwood TS-570D RCP-2 software - Download Kenwood's free radio control software for the TS-570 HF

KMIJ Kenwood Remote Control for TS-850/TS-450 - Windows radio control software for the Kenwood TS-850S and TS-450S HF Rigs. Originally released as shareware, there is a version that is now Freeware, with free registration upon request. Old program by VE3MIJ

KTune - KTune is a small utility that allows you to use a Griffin Powermate USB knob to tune your Elecraft K3 radio.

Link700 - Link700 is a program that will allow users of Kenwood TH-D7A, E, and AG and TM-D700A and E to download all the data settings of their radio, edit and modify data, upload the data, and save settings to a disk file

LoopControl - HB9MTN loop motor control software. For motor control, either Centronics, RS232 or USB ports can be used, for CAT-Control the RS232 or USB ports.

MacR–1000 - Icom IC–PCR1000 communications receiver remote control for Apple Macintosh computers running MacOsX

Micro-G2b Rotor control - This program uses a Z-World Micro-g2b board to control up to 4 rotors.

MiniDeluxe - MiniDeluxe is a light-weight replacement for Ham Radio Deluxe that provides interoperability with FlexRadio's PowerSDR and Ham Radio Deluxe's Logbook and digital mode programs

Monteria - International Commercial supplier of HF, VHF and UHF signals analysis and receiver control hardware and software

MPFilters for FT-1000MP - MPfilters is a Windows-based program which enables you to select the Yaesu FT-1000MP and FT-1000MP Mark V main receiver and sub receiver IF filters via the radio’s CAT port

MR8100 Page - MR-8100 user's manual with PC software supplement

N9ZLE ICOM - CIV Software - IRC is a Free Radio control program for Icom radios using the CIV CT-17 or compatible interface. This program allows the use of different skins to display just about any radio from the IC746 to a secret agent watch. The program uses the new features available with the 746 and 756 to upload or save memories from your rig

Omni-Rig - A COM component for transceiver/receiver CAT control. Not a complete program, but rather a component tool that allow software developers to connect their program to a supported transceiver.

or2or - OmniRig to Omnirig - or2or is a simple OmniRig utility software, it let you to connect via LAN or WAN two PC where two Omnirig sessions are running or interconnect Radio1 and Radio2 locally, in one PC, always via OmniRig interface. By IK0VVE

PCR Remote Control - PCR Remote Control enables you to control your Icom PCR-100, PCR-1000, PCR-1500 or PCR-2500 over the internet. Using SHOUTcast or a similar Audio Server, you "Broadcast" your radio over the internet allowing others to hear whats going on in your local community.

PCR1000 Scanning Software - Commercial software developed exclusively for scanning 25 to 1300 MHz. No other PCR1000 software offers as many innovative scanning features.

PCRCloak - A small, simple Windows program to cloak the ICOM PCR-1500 and PCR-2500 as a PCR-1000, allowing owners to use their scanner with Ham Radio Deluxe

POC32 - POCSAG POCSAG Protocol Decoder, Monitor for Windows 95/98 and Windows NT 4.0

PorkControl for Yaesu FT-817ND - PorkControl is a Java-based software controller for the Yaesu FT-817ND (and older FT-817) HAM transceiver. It is currently in beta and released under the GNU GPL v2 on Windows, Linux and MAC OSX. PorkControl is used to control frequency and other features without using the fiddly controls on the unit itself. It also supports automatic radio control to access repeaters based on the UK Repeater List.

ProScan 780 - Computer aided scanning software for the BC 780, commercial runs under windows.

ptt2dtr - Translates CAT PTT commands into COM port DTR line changes. Use COM port PTT instead of CAT PTT control.

QRG_DB1 - QRG_DB is a database for the Palm OS computer to control a Yaesu FT-817 Transceiver via the CAT interface