DXZone.com  
Home : Software : Radio Control : Page 2
Search
in "Radio Control"

Radio Control

radio control software,for swl and ham radio operators programs

(Featuring 144 resources)
Additional Categories
Site listings
 Home : Software : Radio Control : Page 2 Add a link

    Most Popular
    • Commander - A free application that controls up to 4 Alinco, Elecraft, FlexRadio, Icom, JST, Kachina, Kenwood, TenTec, or Yaesu transceivers, switching between them manually or automatically based on frequency, and displaying frequency-dependent settings for devices like tuners and amplifiers; includes a bandspread, and supports transverters, frequency and mode tracking by an independent transceiver or receiver, SDR-based panadaptors, and SO2R switching with microHam or OTRSP-compliant devices.
    • Ham Radio Deluxe v4 - HRD v4 is a freeware windows multi function software, includes logbook, CAT Control software for Elecraft, Kenwood, ICOM, Ten-Tec and Yaesu radios, rotor controls, digital mode rtx, rotor control, dx cluster client and many more features by HB9DRV
    • VisualRadio - Interactive Webradio Software under Windows for most receivers/transceivers available today.
    • FTBCAT Cat radio control software - Free CAT control software for Yaesu FT-100, FT-100D, FT-817, FT-817ND, FT-847, FT-857, FT-857D, FT-897, FT-897D, FT-920, FT-1000MP Mark V, VR-5000 and FRG-100 transceivers.
    • RadioCommander 2052 - Radio control program for windows by kd5lmy
    • TRX-Manager HAM Radio CAT Software - TRX-Manager allows control of most radios on the market and features many original features. By Laurent Labourie F6DEX
    • RadioControl - 32-bit Windows software to control multiple radios simultaneously. Beside direct control, it also features frequency and memory management and various scan options. Supported radios range from AOR to Icom and WiNRADiO.
    • ARCS II - TS-2000 control - Amateur Radio Control System for the Kenwood TS-2000 by WB5KIA
    • RadioComm - RadioComm can be used to program your Icom radio's memory, or to create nice radio-frequency spectra (see above) or to interface your radio to a huge database of frequencies.
    • Antenna Rotator System - The ARS will allow to control any antenna rotator (Azimuth & Elevation) from a computer. Even if you are only interested on HF arrays, the ARS will allow it. Supported from most programs as CT for DOS, tracking programs.
    • FTBasic - FTBasic is a CAT control program for Yaesu radios FT100, FT817, FT847, FT1000MP Mark V and FRG100
    • Scan Manager - Windows-Based HF Scanning, Logging, SWL, and Radio Control Software from KC4ZGL HAM Software
    • Grig Radio Control - Grig is a freeware simple Ham Radio control (CAT) program based on the Ham Radio Control Libraries (Hamlib). It is intended to be highly generic presenting the user to the same graphical user interface regardless of which radio is being controlled. Grig supports the most commonly used CAT commands that are implemented by Hamlib, and integrates well with other ham radio programs like Xlog and gMFSK. Grig has been developed on Linux, but has been ported on Mac and Windows OS.
    • BuTel Software - Software Information PC Interfaces for the scanning radio hobbyist & professional radio control applications
    • FT857 SuperControl - CAT control and logging software project especially developed for the YAESU FT-857 transceiver. Full control of the trcvr, EEPROM modification, VoIP, TCP/IP remote control, macro CW keyer, visual band scope
    • FT897 SuperControl - CAT control and logging software project especially developed for the YAESU FT-897 transceiver. Full control of the trcvr, EEPROM modification, VoIP, TCP/IP remote control, macro CW keyer, visual band scope
    • FT-817 Commander - The ultimate free CAT program for the Yaesu FT-817
    • Control CAT FT 847 - Control software for Yaesu FT-847
    • Kenwood TS-570D RCP-2 software - Download Kenwood's free radio control software for the TS-570 HF
    • Icom CAT Control - CAT Control for Icom IC-706-IC706MKII-IC706MKII/G and IC-7000 with MEMORY management
    • SOFT990 - SOFT990 is a freeware designed for the transceiver YAESU FT-990. Running also with FT-840 FT-890 FT-900 FT-920 FT1000MP FT-1000D
    • KMIJ Kenwood Remote Control for TS-850/TS-450 - Windows radio control software for the Kenwood TS-850S and TS-450S HF Rigs. Originally released as shareware, there is a version that is now Freeware, with free registration upon request. Old program by VE3MIJ
    • Spectrum Commander - Scan*Star Spectrum Commander is the software of choice for radio enthusiasts who desire advanced computer control, comprehensive database management features and support for a wide range of radios and decoders.
    • FT847-SuperControl CAT - FT847-SuperControl is a CAT software especially for the FT-847 transceiver from YAESU. You can download a trial version.
    • All in One by WD8KNC - Windows based contest logging software with multiple functions like antenna rotor control, dx cluster, cat control, voice and cw keying, supports many data modes, qrz lookup, pirint qsl and labels, mapping and more
    • FT-817 Commander download support site - The official FT-817 Commander and PSK31 Deluxe download support site.
    • TH-D7 control program - This software allows you to control TH-D7 radio functions in real time, using a windows interface. This software will graph current activity of any 4mhz range, allowing the user to mouse click any active portion - automatically changing the radios frequency.
    • ICOM Rig Control - Freeware amateur radio transceiver control program tested with IC-756 Pro.
    • Easy VX-5R Editor - The Yaesu VX-5R editor
    Alphabetical
        Result Page:  [<<] 1 2
    • Radio Control Program ARCP-480 - This free software is an application solely for the use of controlling the Kenwood TS-480. Can be used to edit, save, and export to the TS-480 information such as Memory, Menu, and Auto Mode frequencies.
      [Hits: 1605 | Votes: 1 | Rate: 8.00]
    • Radio Manager for Windows - Click Here for Radio Manager 2004 software - for the Uniden BC296D, BC796D, BC780XLT, BC785D, BC250D, & BC895XLT scanners
      [Hits: 4085 | Votes: 10 | Rate: 5.30]
    • Radio Shack PRO-2052 remote control - Remote control software for the Radio Shack PRO-2052 dual trunking scanner
      [Hits: 974 | Votes: 4 | Rate: 5.50]
    • RadioComm - RadioComm can be used to program your Icom radio's memory, or to create nice radio-frequency spectra or to interface your radio to a huge database of frequencies.
      [Hits: 774 | Votes: 3 | Rate: 10.00]
    • RadioCtl - A computer control program for ICOM, KENWOOD, Radio Shack and AOR radios using Windows 3.1 or Windows 95. The program features 1000 frequency channels, 100 scan and search banks, and DBASE compatible frequency lookups.
      [Hits: 2458 | Votes: 3 | Rate: 5.67]
    • RadioMax - Allows any PC to improve the performance of radios and scanners, providing fully automated control of the radio (plus tape recorder if desired) allowing unattended scanning, logging, speech and tape recorder control. Works with AOR, DRAKE, Icom, Kenwood, Lowe, Optoelectronics, Radio Shack and Uniden.
      [Hits: 1521 | Votes: 0 | Rate: 0.00]
    • RemIcom-B - Freeware RemIcom-B is a very simple ICOM remote program. Display of current frequency, mode and filter ITU HF Band assignment (ITU Region 1, 2 and 3 selectable) HAM HF Band usage analog frequency band display
      [Hits: 3093 | Votes: 1 | Rate: 10.00]
    • RigResident - RigResident is a small program for RIG control, which does allow to set and read data of connected tranceiver (frequency, mode etc). RigResident supports more than 70 TRX models from ICOM, KENWOOD, YAESU and Ten-Tec.
      [Hits: 2944 | Votes: 4 | Rate: 7.10]
    • RPU-8 - Software for control radioscanners AR300, AR5000, Icom PCR-1000, Winradio``simultaneously can work before 8 scanners Scanning mode/window
      [Hits: 2835 | Votes: 11 | Rate: 4.82]
    • RxPlus - A full featured Receiver Controller for TenTec Rx320 with Audio Processor, digital modes decoder, ILG DataBase Manager and much more. Support for Drake R8A/B,ICOM PCR-1000, ICOM R756Pro and ICOM R756 Pro I ICOM IC-R75, JRC NRD-535, Kenwood R5000, TenTec RX320(D) and TenTec RX350D receivers
      [Hits: 3761 | Votes: 11 | Rate: 6.82]
    • SARtek - Universal antenna rotor interface
      [Hits: 420 | Votes: 0 | Rate: 0.00]
    • Scan Manager - Windows-Based HF Scanning, Logging, SWL, and Radio Control Software from KC4ZGL HAM Software
      [Hits: 13987 | Votes: 8 | Rate: 4.50]
    • Scan505 - It is a simple freeware scanner program for the Kachina DSP505. The software does NOT control the radio thru the interface port - it works in conjuction with the Kachina control software using the file interface
      [Hits: 981 | Votes: 2 | Rate: 10.00]
    • SCAN505 - A simple freeware scanner program for the Kachina DSP505. The software does NOT control the radio thru the interface port - it works in conjuction with the Kachina control software using the file interface
      [Hits: 280 | Votes: 1 | Rate: 10.00]
    • ScanCat Lite Plus - Scancat-Lite-Plus for Windows supports the memory programming for Radio Shack and Uniden Scanners
      [Hits: 3089 | Votes: 8 | Rate: 5.25]
    • ScanControl - ScanControl is the only low cost, easy to use software that supports programming and control & monitoring of the Uniden BC245XLT, BC895XLT, BCT8, BC780XLT, BC250D, BC785D, BC296D, BC796D Digital Scanners and the Radio Shack PRO2052
      [Hits: 3355 | Votes: 3 | Rate: 8.67]
    • Scanner VHF-UHF monitoring - Scanner VHF-UHF software for monitoring VHF-UHF range by means of receiver ICOM IC-R8500.
      [Hits: 405 | Votes: 1 | Rate: 2.00]
    • ScanNow for AR8000 - ScanNow is a computer scanner control program for AR8000
      [Hits: 1924 | Votes: 4 | Rate: 5.50]
    • Shortwave Log (SWLog) - Shortwave Log, SWLog is a comprehensive logging and radio control program. While designed for shortwave and mediumwave listening, the program is quite adept when listening to longwave, utility, or amateur radio. Support Icom Drake TenTec Yaesu JRC and lowe receivers.
      [Hits: 4078 | Votes: 19 | Rate: 5.59]
    • SimplePTT - This application is used for simply triggering PTT via DTR/RTS COM port pins. It supports remote PTT triggering with ptt2dtr as the server.
      [Hits: 1110 | Votes: 4 | Rate: 5.75]
    • SimplePTT - You can use this simple application for triggering PTT on your radio via DTR/RTS COM port pins.
      [Hits: 1206 | Votes: 2 | Rate: 1.00]
    • SOFT990 - SOFT990 is a freeware designed for the transceiver YAESU FT-990. Running also with FT-840 FT-890 FT-900 FT-920 FT1000MP FT-1000D
      [Hits: 9112 | Votes: 9 | Rate: 4.67]
    • Spectrum Commander - Scan*Star Spectrum Commander is the software of choice for radio enthusiasts who desire advanced computer control, comprehensive database management features and support for a wide range of radios and decoders.
      [Hits: 8212 | Votes: 6 | Rate: 3.50]
    • SWL Manager - SWL Manager 2.0 is designed to assist the Short Wave Listener determine which countries are broadcasting English Speaking Programs, including the Time and Frequencies they're on.
      [Hits: 3208 | Votes: 1 | Rate: 6.00]
    • TalkPcr & BackPcr - TalkPcr, a Win95/98 programme to talk to your PCR1000, and BackPCR a Dos utility to backup your PCR1000 Eeprom data by Pete Mahy, G4NIS.
      [Hits: 3088 | Votes: 50 | Rate: 7.17]
    • Ten-Tec RX-320 Control program - The program GNRX320 is intended to operate the Ten-Tec RX-320 receiver
      [Hits: 1517 | Votes: 2 | Rate: 1.00]
    • TH-D7 control program - This software allows you to control TH-D7 radio functions in real time, using a windows interface. This software will graph current activity of any 4mhz range, allowing the user to mouse click any active portion - automatically changing the radios frequency.
      [Hits: 5469 | Votes: 13 | Rate: 4.77]
    • TK-150 - tk150 experimental Software for the Standard VR-150 Receiver
      [Hits: 145 | Votes: 0 | Rate: 0.00]
    • TK120 - open source software designed for the Yaesu VR-120 receiver.
      [Hits: 891 | Votes: 4 | Rate: 5.25]
    • TK150 - tk150 is open source, multi-platform cloning software for the Standard (Yaesu) VR-150 portable receiver.
      [Hits: 610 | Votes: 0 | Rate: 0.00]
    • TK500 - Open source software designed for the Yaesu VR-500 receiver.
      [Hits: 1428 | Votes: 1 | Rate: 10.00]
    • TK545 - Open source software designed to control and program the Japan Radio Co. NRD-545 receiver.
      [Hits: 772 | Votes: 1 | Rate: 7.00]
    • TK75 - Open source software designed to control and program the ICOM IC-R75 receiver
      [Hits: 1417 | Votes: 4 | Rate: 8.50]
    • TK8500 - open source software designed to control and program the ICOM IC-R8500 receiver
      [Hits: 1498 | Votes: 2 | Rate: 4.00]
    • Trident TR-4000 - Program for PC control of the Trident TR-4000 / Camnis HSC-150 handheld radio scanner
      [Hits: 1116 | Votes: 13 | Rate: 6.85]
    • TS-2000 Radio Control Program - ARCP-2000 Radio Control Program for the Kenwood TS-2000 transceiver.
      [Hits: 2520 | Votes: 3 | Rate: 1.00]
    • TS-870 Control Program - Freeware remote control software for Kenwood TS-870 by EC4DFP
      [Hits: 1806 | Votes: 31 | Rate: 7.44]
    • TS780 - TrunkStar780%u2122 is a high-performance, full-featured software package for Uniden® BC780XLT trunking scanner. Data management and operational control over the BC780XLT is provided.
      [Hits: 842 | Votes: 0 | Rate: 0.00]
    • UnidenCommander - UnidenCommander, Uniden Commander provides full control over your Uniden Bearcat scanner from your PC and even adds functionality which is not normally available on your Uniden Bearcat scanner.
      [Hits: 230 | Votes: 0 | Rate: 0.00]
    • Virtual Legacy Radio - Windows remote control for Yaesu or Icom. Displays the current transceiver settings frequency, mode, and others on the PC in an old-fashioned way that corresponds to the look of receivers in 70's. DX-Cluster Watch (DCW) is an application that automatically refreshes a web page with the dx-cluster content, parses spot lines from it, keeps a consolidated list and inserts the spots to VLR as frequency markers by OK1FIG
      [Hits: 1142 | Votes: 4 | Rate: 10.00]
    • WiNRADiO for Mac - WiNRADiO for Mac, WiNRADiO provides Apple Macintosh support for our most popular receiver, the WR-1550e, a medium-range external receiver with frequency range 150 kHz to 1.5 GHz
      [Hits: 2633 | Votes: 0 | Rate: 0.00]
    • WKRemote - This application allows two Winkeyers to be linked over the Internet for Morse code exchanges or for remote keying of a station.
      [Hits: 51 | Votes: 0 | Rate: 0.00]
    • Yaesu VR-5000 control software - F1MDT freeware remote control for yaesu VR-5000 in french
      [Hits: 3800 | Votes: 5 | Rate: 4.60]
    • ZHAKSYLOG - Ham radio logging and remote control for Kenwood transceivers by UT1YV
      [Hits: 464 | Votes: 0 | Rate: 0.00]
      Result Page:  [<<] 1 2
  • Search dxzone.com on Radio Control
  • Add to Google
  • Lookup Google Custom Search Engine for Radio Control
  • Search Radio Control with: Yahoo!, Teoma, Lycos , Bing
  • Share this page


    Add to Google
    Daily Top 10

    Share Bookmark

    Follow dxzone.com: XML RSS Feeds Daily Top 10 links AddThis Feed Button

    DXZone Newsletter


    Enter your email address:

    Delivered by FeedBurner

    Google CSE

    Add to Google

      ©1998-2013 The DXZone.com - Terms of Use, Copyright & Privacy Policy Last Update: Fri Feb 22 2013 - 06:53:16