Home : Software : Radio Control : Page 3
radio control software,for swl and ham radio operators programs
- MR8100 Page
- MR-8100 user's manual with PC software supplement
[ Hits: 1628 | Votes: 24 | Rating: 6.63 ]
- N4PY Software
- N4PY Software is your source for high quality, effective rig control software for your transceiver. N4PY offers rig control software for a wide variety of receivers from the Elecraft K3 to the Ten Tec RX 320 receiver and it is major equipment integrator supporting panadapters, winkeyer, Tmate2 or FlexControl
[ Hits: 644 | Votes: 0 | Rating: 0.00 ]
- N9ZLE ICOM - CIV Software
- IRC is a Free Radio control program for Icom radios using the CIV CT-17 or compatible interface. This program allows the use of different skins to display just about any radio from the IC746 to a secret agent watch. The program uses the new features available with the 746 and 756 to upload or save memories from your rig
[ Hits: 4293 | Votes: 12 | Rating: 6.42 ]
- A COM component for transceiver/receiver CAT control. Not a complete program, but rather a component tool that allow software developers to connect their program to a supported transceiver.
[ Hits: 2239 | Votes: 2 | Rating: 5.00 ]
- The project is the first cross-platform Omni-Rig.NET implementation of the well-known program Omni-Rig by VE3NEA. Omni-Rig.NET program is written in C# and is designed for implementation in a variety of projects to manage your amateur radio transceivers.
[ Hits: 357 | Votes: 1 | Rating: 7.00 ]
- or2or - OmniRig to Omnirig
- or2or is a simple OmniRig utility software, it let you to connect via LAN or WAN two PC where two Omnirig sessions are running or interconnect Radio1 and Radio2 locally, in one PC, always via OmniRig interface. By IK0VVE
[ Hits: 432 | Votes: 3 | Rating: 9.00 ]
- PCR Remote Control
- PCR Remote Control enables you to control your Icom PCR-100, PCR-1000, PCR-1500 or PCR-2500 over the internet. Using SHOUTcast or a similar Audio Server, you "Broadcast" your radio over the internet allowing others to hear whats going on in your local community.
[ Hits: 1995 | Votes: 7 | Rating: 2.43 ]
- PCR1000 Scanning Software
- Commercial software developed exclusively for scanning 25 to 1300 MHz. No other PCR1000 software offers as many innovative scanning features.
[ Hits: 1787 | Votes: 1 | Rating: 1.00 ]
- A small, simple Windows program to cloak the ICOM PCR-1500 and PCR-2500 as a PCR-1000, allowing owners to use their scanner with Ham Radio Deluxe
[ Hits: 1418 | Votes: 5 | Rating: 3.00 ]
- POCSAG POCSAG Protocol Decoder, Monitor for Windows 95/98 and Windows NT 4.0
[ Hits: 2977 | Votes: 19 | Rating: 5.95 ]
- PorkControl for Yaesu FT-817ND
- PorkControl is a Java-based software controller for the Yaesu FT-817ND (and older FT-817) HAM transceiver. It is currently in beta and released under the GNU GPL v2 on Windows, Linux and MAC OSX. PorkControl is used to control frequency and other features without using the fiddly controls on the unit itself. It also supports automatic radio control to access repeaters based on the UK Repeater List.
[ Hits: 2105 | Votes: 1 | Rating: 8.00 ]
- ProScan 780
- Computer aided scanning software for the BC 780, commercial runs under windows.
[ Hits: 1552 | Votes: 9 | Rating: 9.56 ]
- Translates CAT PTT commands into COM port DTR line changes. Use COM port PTT instead of CAT PTT control.
[ Hits: 623 | Votes: 5 | Rating: 7.20 ]
- QRG_DB is a database for the Palm OS computer to control a Yaesu FT-817 Transceiver via the CAT interface
[ Hits: 1081 | Votes: 0 | Rating: 0.00 ]
- R-20 Signal Capture and Analysis
- This windows software includes an easy to read display with features designed to give you accurate and enhanced control of your ICOM IC-R20 Communication Receiver. Commercial 35 USD.
[ Hits: 151 | Votes: 0 | Rating: 0.00 ]
- R-20 Signal Capture and Analysis Software
- Connect your R-20 Communications Receiver to your computer. Put your listening hobby on your computer desktop.
[ Hits: 675 | Votes: 5 | Rating: 6.60 ]
- ICOM R2 controlling program
[ Hits: 1119 | Votes: 2 | Rating: 9.00 ]
- Radio Control Program ARCP-480
- This free software is an application solely for the use of controlling the Kenwood TS-480.
Can be used to edit, save, and export to the TS-480 information such as Memory, Menu, and Auto Mode frequencies.
[ Hits: 1913 | Votes: 2 | Rating: 9.00 ]
- Radio Manager for Windows
- Click Here for Radio Manager 2004 software - for the Uniden BC296D, BC796D, BC780XLT, BC785D, BC250D, & BC895XLT scanners
[ Hits: 4415 | Votes: 10 | Rating: 5.30 ]
- Radio Shack PRO-2052 remote control
- Remote control software for the Radio Shack PRO-2052 dual trunking scanner
[ Hits: 1143 | Votes: 6 | Rating: 4.00 ]
- RadioComm can be used to program your Icom radio's memory, or to create nice radio-frequency spectra or to interface your radio to a huge database of frequencies.
[ Hits: 990 | Votes: 3 | Rating: 10.00 ]
- RadioCommander 2052
- Radio control program for windows by kd5lmy
[ Hits: 32280 | Votes: 26 | Rating: 3.13 ]
- 32-bit Windows software to control multiple radios simultaneously. Beside direct control, it also features frequency and memory management and various scan options. Supported radios range from AOR to Icom and WiNRADiO.
[ Hits: 29600 | Votes: 66 | Rating: 6.97 ]
- A computer control program for ICOM, KENWOOD, Radio Shack and AOR radios using Windows 3.1 or Windows 95. The program features 1000 frequency channels, 100 scan and search banks, and DBASE compatible frequency lookups.
[ Hits: 2661 | Votes: 3 | Rating: 5.67 ]
- Allows any PC to improve the performance of radios and scanners, providing fully automated control of the radio (plus tape recorder if desired) allowing unattended scanning, logging, speech and tape recorder control. Works with AOR, DRAKE, Icom, Kenwood, Lowe, Optoelectronics, Radio Shack and Uniden.
[ Hits: 1763 | Votes: 1 | Rating: 10.00 ]
- Freeware RemIcom-B is a very simple ICOM remote program.
Display of current frequency, mode and filter
ITU HF Band assignment (ITU Region 1, 2 and 3 selectable)
HAM HF Band usage
analog frequency band display
[ Hits: 3322 | Votes: 1 | Rating: 10.00 ]
- RemoteHams.com permit to display and control transceivers all around the world
[ Hits: 2996 | Votes: 67 | Rating: 7.78 ]
- RigResident is a small program for RIG control, which does allow to set and read data of connected tranceiver (frequency, mode etc).
RigResident supports more than 70 TRX models from ICOM, KENWOOD, YAESU and Ten-Tec.
[ Hits: 3292 | Votes: 4 | Rating: 7.10 ]
- Software for control radioscanners AR300, AR5000, Icom PCR-1000, Winradio``simultaneously can work before 8 scanners Scanning mode/window
[ Hits: 3122 | Votes: 11 | Rating: 4.82 ]
- A full featured Receiver Controller for TenTec Rx320 with Audio Processor, digital modes decoder, ILG DataBase Manager and much more.
Support for Drake R8A/B,ICOM PCR-1000, ICOM R756Pro and ICOM R756 Pro I ICOM IC-R75, JRC NRD-535, Kenwood R5000, TenTec RX320(D) and TenTec RX350D receivers
[ Hits: 4321 | Votes: 12 | Rating: 6.34 ]
- Universal antenna rotor interface
[ Hits: 464 | Votes: 0 | Rating: 0.00 ]
- It is a simple freeware scanner program for the Kachina DSP505. The software does NOT control the radio thru the interface port - it works in conjuction with the Kachina control software using the file interface
[ Hits: 1075 | Votes: 3 | Rating: 9.33 ]
- A simple freeware scanner program for the Kachina DSP505. The software does NOT control the radio thru the interface port - it works in conjuction with the Kachina control software using the file interface
[ Hits: 369 | Votes: 1 | Rating: 10.00 ]
- ScanCat Lite Plus
- Scancat-Lite-Plus for Windows supports the memory programming for Radio Shack and Uniden Scanners
[ Hits: 3256 | Votes: 8 | Rating: 5.25 ]
- ScanControl is the only low cost, easy to use software that supports programming and control & monitoring of the Uniden BC245XLT, BC895XLT, BCT8, BC780XLT, BC250D, BC785D, BC296D, BC796D Digital Scanners and the Radio Shack PRO2052
[ Hits: 3643 | Votes: 3 | Rating: 8.67 ]
- Scanner VHF-UHF monitoring
- Scanner VHF-UHF software for monitoring VHF-UHF range by means of receiver ICOM IC-R8500.
[ Hits: 777 | Votes: 2 | Rating: 1.50 ]
- ScanNow for AR8000
- ScanNow is a computer scanner control program for AR8000
[ Hits: 2201 | Votes: 4 | Rating: 5.50 ]
- Shortwave Log (SWLog)
- Shortwave Log, SWLog is a comprehensive logging and radio control program. While designed for shortwave and mediumwave listening, the program is quite adept when listening to longwave, utility, or amateur radio. Support Icom Drake TenTec Yaesu JRC and lowe receivers.
[ Hits: 5397 | Votes: 22 | Rating: 6.15 ]
- This free windows application is used for simply triggering PTT via DTR/RTS COM port pins. It supports remote PTT triggering with ptt2dtr as the server.
[ Hits: 2745 | Votes: 8 | Rating: 6.75 ]
- SOFT990 is a freeware designed for the transceiver YAESU FT-990. Running also with FT-840 FT-890 FT-900 FT-920 FT1000MP FT-1000D
[ Hits: 10588 | Votes: 9 | Rating: 4.67 ]
- Spectrum Commander
- Scan*Star Spectrum Commander is the software of choice for radio enthusiasts who desire advanced computer control, comprehensive database management features and support for a wide range of radios and decoders.
[ Hits: 10248 | Votes: 7 | Rating: 4.43 ]
- SWL IR Remote control
- IR Remote Control for Shortwave Radios & Scanners
[ Hits: 156 | Votes: 0 | Rating: 0.00 ]
- TalkPcr & BackPcr
- TalkPcr, a Win95/98 programme to talk to your PCR1000, and BackPCR a Dos utility to backup your PCR1000 Eeprom data by Pete Mahy, G4NIS.
[ Hits: 3237 | Votes: 52 | Rating: 6.97 ]
- Ten-Tec RX-320 Control program
- The program GNRX320 is intended to operate the Ten-Tec RX-320 receiver
[ Hits: 1659 | Votes: 4 | Rating: 3.25 ]
- TH-D7 control program
- This software allows you to control TH-D7 radio functions in real time, using a windows interface. This software will graph current activity of any 4mhz range, allowing the user to mouse click any active portion - automatically changing the radios frequency.
[ Hits: 6278 | Votes: 20 | Rating: 5.54 ]
ACARSADS-BAndroidAntenna analysisAntenna rotor controlAPRSAudio RecordersAudio StreamingAwards trackingBeacon MonitoringBrowser extensionsCircuit DesignClip ArtCollectionsContestingD-STARDatabasesDecodersDigital SSTVDigital VoiceDRMDSPDX ClusterEMEFilter DesignFront Panel DesignGrid Bearing and MapsHam ExamHellschreiberInternet LinkingiPhoneJT65LinuxLog AnalysisLog ConvertersLoggingLow FrequencyMacintoshMorse Code DecodersMorse Code TrainingMultimodeNavtexOliviaOscilloscopePacketPacket ClusterPalmOSPIC ProgramerPocket PCPropagationPSK31QSLRadio Control *Radio ProgrammingRepeater ControlRF Coverage MappingRTTYSatellite trackingShortwaveSignal GeneratorSoftware Defined RadioSpectrum analyzersSSTVTimeUtilitiesVector Network AnalyzerVirtual Audio SoftwareVoice KeyerVoice toolsWeak SignalWeather and FAX
About The DXZone
The DXZone is the largest human created and maintained library of web sites dedicated to Amateur Radio, currently lists 20.000+ links organized into 600+ categories and subcategories. Ham Radio operators review new sites every day since 1998, for potential inclusion in the Directory, and to evaluate the best place to list them.
Software : Radio Control
Recent Links ICOM RS-BA1 Yaesu FT-857 CAT Controller FT-920 CAT Controller Software R-20 Signal Capture and Analysis EasyPal Front Panel
Daily Top 10
Get our links, Everywhere!
Sign up for daily Newsletter
Service provided by Google FeedBurner
Free for your Site
Add our gadgets to your siteDaily Top 10 links