ACOM 1000 specifications
   
 
   
   
 

Frequency Coverage: All amateur bands 1.8-54MHz; extensions and/or changes on request.
Power Output: 1000W PEP or continuous carrier, no mode limit.
Intermodulation Distortion: Better than 35dB below rated output.
Hum and noise: Better than 40dB below rated output.
Harmonic Output Suppression:
   -1.8-29.7MHz - better than 50dB below rated output;
   -50-54MHz - better than 66dB below rated output.
Input and Output Impedances:
   - nominal value: 50 Ohm unbalanced, UHF (SO239) type connectors;

   - input circuit: broadband, VSWR less than 1.3:1, 1.8-54MHz continuously (no tunings, no switching);
   - bypass path VSWR less than 1.1:1, 1.8-54MHz continuously;
   - output matching capability: better than VSWR 3:1 or greater at reduced output levels.
RF Gain: 12.5dB typically, frequency response less than 1dB (50 to 60W drive power for rated output).

Primary Power: 170-264V (200, 210, 220, 230 & 240V nominal taps, 100, 110 & 120V taps on request, +10%-15%tol.), 50-60Hz, single phase, 2000VA consumption at rated output.
Complies with CE safety and EMC requirements, as well as FCC-regulations (6,10 & 12m bands lock provided).
Size & Weight (operating):
   -WxDxH: 422x355x182mm, 22kg.
   -(16.6x14x7.2 inches, 48.5lbs)
Operating environments:
   - temperature range: 0...+50 degs.Celsius;
   - humidity: up to 75% @ +35 degs.Celsius.
   - height: up to 3000m above sea level without output deterioration

   
   
   
   
 
   
 
ACOM International, Inc , 1988-2012 , All rights reserved