Search Results for "end feed ant"24 links
Antennas : 10M
- A double extended Zepp for 10 meters
- How to make a Double Extended Zepp Antenna, almost a conventional halfwave dipole fed in the center with 300 or 450 ohm feed line by kh6jrm
[ Hits: 1011 | Votes: 1 | Rating: 7.00 ]
- Endfed 20/30 Mtr Antenna
- Article with detailed pictures of an endfeed antennna for 20 and 30 meter band
[ Hits: 9966 | Votes: 2 | Rating: 6.50 ]
- PA0NHC 80/40mtrs dipole antenna
- Dipole antenna for 80 to 20 mtrs with END-coax feed by PA0NHC
[ Hits: 6736 | Votes: 7 | Rating: 7.43 ]
- 1:4 Current Balun
- This project is intended to aid in tuning a balanced antenna or feedline that has a high impedance 100-600 ohms by N5ESE
[ Hits: 2907 | Votes: 1 | Rating: 10.00 ]
- The Double Bazooka Antenna
- The Double Bazooka Dipole is a very efficient single band antenna which is very quite, and does not require the use of a balun. This antenna consists of coax (RG58) or other 50 ohm type with the shield split at the center and the feedline attached to the open ends
[ Hits: 7822 | Votes: 4 | Rating: 8.25 ]
- K7MEM Center-Fed Half-Wave Dipole ( 3-30 MHz)
- A Center-Fed Half-Wave Dipole is probably the simplest of antennas to construct and use. It is usually suspended between two supports, from it's end insulators, and has the feedline hanging from the center.
[ Hits: 2519 | Votes: 4 | Rating: 5.50 ]
- Feeding an End-Fed Antenna
- End-Fed antennas are NOT balanced systems; but neither are verticals, ground planes, discones, windoms, zepps, Marconis, half-slopers, et al. Additionally, the low-impedance antenna port of your transmitter/receiver is not balanced.
[ Hits: 19839 | Votes: 20 | Rating: 7.76 ]
- The versatile end-fed wire
- Benefits and limitations of an end feed antennas.
By Peter Parker VK3YE - first appeared in Amateur Radio, June 1998
[ Hits: 7982 | Votes: 3 | Rating: 6.67 ]
- End Fed Half Wave Antennas
- An interesting article on end fed half wave antennas
[ Hits: 5764 | Votes: 2 | Rating: 7.00 ]
- End-fed Vertical and J-pole
- Understanding Gain differences, j-pole and end-feed vertical antennas.
[ Hits: 1306 | Votes: 1 | Rating: 1.00 ]
- End Fed Half Wave Antenna Coupler
- Centre fed half wave dipoles make great, simple and effective antennas for the HF bands. Sometimes however, the centre feed is not ideal. This great project will improve the overall antenna performance.
[ Hits: 997 | Votes: 1 | Rating: 10.00 ]
- Feeder Radiation
- Connecting centre fed antennas, dipoles, yagis, rhombics, loops to coaxial cable, unless care is taken, it is not difficult to end up with feeder radiation resulting in power loss and the radiation characteristics changes
[ Hits: 1624 | Votes: 1 | Rating: 1.00 ]
- Eliminating TX RF Feedback Problems
- Malfunction of transceivers due to stray RF pickup is a common problem, especially when using end-fed antennas, high-impedance feedlines, or a poor ground counterpoise
[ Hits: 1749 | Votes: 1 | Rating: 1.00 ]
- The G5RV Antenna System Re-Visited
- The original G5RV antenna system consists of a center-fed horizontal 102' wire plus a 34' length of open-wire 525-Ohm feeder. Louis Varney, the antenna system's developer, intended two other features. Learn more at Cebik website
[ Hits: 4251 | Votes: 0 | Rating: 0.00 ]
- 88' Zig Zag Double Extended Zepp
- A Double Zepp indoor antenna based on Cebik's reccomendations and design. Can cover HF bands, fed with 450 ohm open wire feeder terminating in an automatic antenna tuner, can perform incredible results.
[ Hits: 1935 | Votes: 6 | Rating: 7.50 ]
- The 5 Bands Wire-Beam
- This wire-beam has one radiator-element, feeded with 450-Ohm-Wireman-twinlead and needs an antenna-tuner. For the bands 6m, 10m, 12m, 15m, 17m and 20m bended reflector-elements are used.
The support is a cross of 4 fibreglass-fishing-rods
[ Hits: 5480 | Votes: 2 | Rating: 7.00 ]
- Patch Feed for S-Band Dish Antennas
- This feed is a patch antenna for 2.4 GHz intended for use with a parabolic reflector dish.
[ Hits: 1030 | Votes: 0 | Rating: 0.00 ]
- Do You Need an Antenna Tuner
- Maybe yes, maybe no. It all depends on the type of antenna and feed line you're using. QST Article in pdf format
[ Hits: 20779 | Votes: 10 | Rating: 5.30 ]
- A Tincan feed for 2.45Ghz
- Construction details for a simple but effective antenna for 2.45Ghz wireless lan use.
[ Hits: 6595 | Votes: 9 | Rating: 5.56 ]
- What Does Your SWR Cost You ?
- Wondering whether to spend a fine day with the YL or with the antenna? This article may help you decide by W1GV
[ Hits: 492 | Votes: 0 | Rating: 0.00 ]
end feed ant
You can try similar termsfeed end feed 239 feed thru rss feed on cb 6m end feed end feed ant feed through end feed zep end feed l end feed 40m feed-url end feed hf 28/50 mhz feed 50 ohm feed to 75 ohm feed scanner
Get our links, Everywhere!
Sign up for daily Newsletter
Service provided by Google FeedBurner
Free for your Site
Add our gadgets to your siteDaily Top 10 links