Building an own Stackmatch
- Nowdays lots of people are putting up antennas to either beam in different directions at the same time or just to stack them and get a lower angle of radiation. Use thisstackmatch to match you array.
50MHz J-Pole Antennapop
- Need a general purpose antenna on the magic band? The J-Pole is an easy-to-build and inexpensive device that provides an omni-directional vertically polarised antenna without the need for a ground plane. In technical terms, it is an end fed vertical 1/2 wave which is fed via a 1/4 wave matching stub.
- The J-Pole antenna is an omnidirectional antenna that can be used for base, mobile and field day stations. It does not need a ground plane, radials or a complicated matching system. The J-Pole can be cheaply, simply and quickly constructed using a variety of techniques, some of which are discussed in this article.
Cebik Moxon Rectangles
- The Moxon Rectangle is growing in popularity as a compact 2-element array that approaches a full-size 2-element in gain but with a far superior front-to-back ratio and a direct match for the standard 50-Ohm coaxial cable.
[ Hits: 3025 | Votes: 5 | Rating: 5.00 ]
The Moxon Antenna
- The Moxon antenna issort of a two element yagi with the elements folded and spaced to eliminate the need for an impedance match.
Cubical Quad Antenna Designupdatedpop
- By N6VNG, can be used to determine the element lengths and the gamma match values for different frequencies, includes link to excel files with formulas to dimension your quad antenna.
Broadband receiving antenna matching
- This article addresses the subject of obtaining the best signal transfer from an antenna to the
typical 50-ohm receiver input over a wide frequency range, with emphasis on medium-wave
(500 – 2000 kHz), encompassing the standard AM broadcast band and the 160-m amateur band.
SWL antenna distribution system
- A methodology for connecting multiple LF/MF/HF receivers to a single antenna via readily available and inexpensive 75-ohm TV cable. Custom made baluns and splitters provide impedance matching and prevent interaction between receivers.
- This database is not a logging program. It is intended to collect information about the HAMs that you know. You just record the call sign and name of a HAM that you meet. Later you can use QRZ to look up the call sign to validate that it matches the name.