10 meter long wire
5 links
- W5GI Mystery Antenna
pop
- W5GI Mystery Antenna is a multi-band wire antenna that performs exceptionally well even though it confounds antenna modeling software.
This antenna covers 80 to 6 meters with low feed point impedance and will work with most radios, with or without an antenna tuner. It is approximately 100 feet long, can handle the legal limit, and is easy and inexpensive to build. It is similar to a G5RV but a much better performer especially on 20 meters.
[ Hits: 139383 | Votes: 123 | Rating: 7.55 ]
- Microvert Antenna for 40m by ON7IR
- A mircovert antenna assembled for the 40m version of the DL7PE antenna.
A one meter long aluminum tube with 24mm diameter is used for the base (element 1) and a 50cm aluminum tube with 20mm diameter for element 2 (the extention). A pvc pipe, 34cm long and with a diameter of 38mm, is used to wind the coil on (1mm enamelled copper wire).
[ Hits: 152 | Votes: 0 | Rating: 0 ]
- Multi-Band End-Fed Antenna Design for Limited Space
new
- This document details the construction of a multi-band end-fed antenna, suitable for situations with limited space for larger antennas. The design utilizes a 1:49 to 1:60 impedance transformer to match a half-wave wire antenna fed at one end. Compared to a traditional dipole, this antenna resembles a highly unbalanced Windom antenna with one very long leg and a virtual short leg. The design eliminates the need for radials but relies on the coax cable shield for grounding. The document recommends using at least 10 meters of coax and installing a common mode filter at the entry point to the shack for improved performance.
[ Hits: 76 | Votes: 0 | Rating: 0 ]
- End Fed Antenna with a 1:64 Matching Network
- In this experiment the autor is going to explore the use of a 1:64 matching network on the End Fed Long Wire Antenna.
Experiment will consist in build a 80-40-20-15-10 meter End Fed Long Wire Antenna with a 1:64 matching network from the documentation available on the internet
[ Hits: 872 | Votes: 15 | Rating: 6.73 ]
- 20 thru 10 Meter Fan Dipole
- The 20 thru 10 meter dipole is constructed from stranded insulated wire available in most hardware stores.
The feedpoint uses an 8 inch long section of 2 inch diameter PVC pipe. A section of wire joins the elements at either side of the feedpoint to avoid the inductance of square knots used on lower frequencies.
[ Hits: 3181 | Votes: 14 | Rating: 5.96 ]
Not satisfied ? Lookup Google Custom Search Engine for 10 meter long wire
Search 10 meter long wire with: Yahoo!, DuckDuckGo
, Bing
Search
Related Searches
You can try similar terms
10 80 meter long wire 20 meter long wire end fed long wire long wire long wire ant long wire end fed 20 m long wire antenna hf long wire antenna long wire antenna long wire dipole long wire for 6 band long wire hf antenna long wire antenna tuner long wire loop antenna 80 meter end fed wire
Get our links, Everywhere!
Follow us on Social Networks
|
RSS Feeds |
Sign up for daily Newsletter
Service provided by Google FeedBurner
Free for your Site
Add our gadgets to your site
Daily Top 10 links