10m quagi

10m Aluminium Moxon Construction - Building a moxon antenna with aluminium tubes

10 Meter Wire Jpole - A vertical en-fed zepp for 28.4 Mhz by N1LO

CobWebb multiband folded dipole - It is basically a 5 band antenna comprising of 5 full half wave dipoles for each band - between 10M & 20M, the antenna is also resonant on 6M

Indoor multiband dipole - This indoor dipole is available in two version for 20-10 meters and 40-10 meters. EZNEC data files available by HB9MTN

10m Halo antenna project - This aerial is designed to fit into a small attic, loft or roof space, or even into the garden shed by Roger Powell G0AOZ

Hentenna for 10 meters - Designing an Hentenna antenna for 10 meters band

6-Band Windom antenna  ^pop - Theory and construction of a novel trapless center-loaded off-center-fed (cl-ocf) dipole or windom antenna for the 80, 40, 30, 20, 15 and 10m hf amateur radio (ham) bands

160m to 10m Sterba Curtain Antenna - Even if using a tuner this multiband antenna will let you operate from 160 to 10 meters. If you could only put up one antenna, this would be it. Project by N0KHQ.

8 Element Quagi Antenna for 70cm - Quagi 8el 70cm improved 13.77dBi by IK1HGE

A short Quagi for 1298Mhz - Based on K5OE design by GM1SXX

The VHF Quagi - There have been many half-hearted attempts to combine a Yagi and a Quad. Most have produced questionable results. Well, here are the "true" facts, the real dope, the hot scoop. K6YNB in QST April 1977

The Indoor spiral dipole - An attic indoor antenna successfully implemented by N9RET by using two runs of 2-conductor wire

10 m Aerial Matching Unit - This simple matching unit will allow a 10 meters aerial to be used right across the 10m band without the need to physically adjust the elements, and offers a virtual 1:1 VSWR at 50 ohms impedance to the transmitter.

A screwdriver antenna in a fixed install Priority listing - Tired of tuners and wires? Put up a screwdriver antenna in a fixed install for multiband operation (80m to 10m) with low SWR. No tuner is needed!

Comparison of two windom antennas - The antenna comparison being reported was between a commercial Chelcom 136ft multi-band windom designed for 80m to 10m and a home brew 260ft full size windom designed for 160m to 10m by G0VVN, G3KAU and G3GRO

Granta Contest Group - HF amplifier - The Granta Contest Group was founded in 1997 by Mark G4AXX, Colin G4CWH, Simon G4EAG, Andy G4KNO. The Group gets it's name from the River Granta (or Cam), which passes through Cambridgeshire and Essex. Using is a 160-10m "desktop kilowatt" linear amplifier using an Eimac 4CX1000A tetrode

10 meter beacons - Latest 28 MHz online beacon spots. A site dedicated to beacons on 10 meters band

The N9RET beacon - Located at grid square EN61bu, in the heart of West Suburban Chicago, Illinois

HB9Z Internet Remote Base - A controllable TS2000 made available at HB9Z in switzerland. Antennas are Carolina Windom 160 for 160-10m, a 5-Element Beam for 20-15-10m a G5RV for 80-10m and a V2000-Vertical for 6m, 2m, 70 cm.

Intruder Amplifiers - Poewer amplifiers for 10m band. Also dealer for Galaxy, Connex, Magnum, Cobra, Browning, and others

Accute Micro - China supplier of ceramic bandpass filters in standard resonator sizes of 2~6mm , 8mm , 10mm and 12mm with freqency from 400Mhz~4Ghz and sections 2~10

IN3KLQ/B - 10m QRSS QRPp Beacon station from Trento Italy

YAESU FL-2100Z Amplifier Repairs - The FL-2100Z amplifier referenced in the following images is the 6-Band model covering 10m thru 160m (no WARC bands) and not the 9-Band version that included the WARC bands. Modifications, schematics and manual

A low cost 600 watt ultra-linear amplifier  ^pop - This compact little amplifier is the brain-child of Pat Murdoch, ZL1AXB, in Auckland, New Zealand. It is only 11" wide, 4" high, and 9" deep. Operates for 40, 20, 17, 15, 12, and 10m

Transverter by IK4ACQ - A collection of transverters projects from 10m to 70cm with pictures. In italian