2m array

Stacked 7-Element-2m-Yagis - These yagis and groups were designed with YO7.23 from K6STI and checked with EZNEC from W7EL. With a gain of 14/17/20dBd they have a good relation between gain and mechanical problems.

13 elements Yagi antenna for 144 MHz - DJ9BV yagi antenna for 2 meters band

2 meter slim jim copper tubing antenna - 2 meters copper tube antenna, tested with an Icom IC-V8000

A 40m Vertical - This antenna is intended as a simple, inexpensive solution for the newcomer to experiment across the 40m band (7.0–7.2MHz) when only restricted space is available

The Impact of Current Distribution on Array Patterns - Technical Correspondence, QST, July 1990 - Why even "perfect" phased array element currents don't produce perfect patterns.

The simplest phased array feed system that works - How to calculate "phasing line" lengths that actually work.

M3FVB VHF 8db collinear  ^{updated  pop} - Build a 2m 8db collinear for portable use

A 5 band log periodic dipole array - Modified version of the Telerana antenna which was orginially featured in the July 1979 issue of QST. The array is suspended within a framework made of fiberglass poles emanating from a central hub with the ends tied together with light weight rope around the perimeter. 10-15-20-30-40 meter band coverage

2m Quagi Antenna plan - A design of a 2 m quagi antenna by TA2IB

Vertical antenna for 2 mt and 70cm  ^pop - How to Build a Dual-Band Antenna for 2M/70cm

NJDXA DX Tips - Calendar, dx events and hot DX Tips, managed by Bill Hellman, NA2M

The VHF Dxpedition to Dominica - Main goals of this dx pedition was test out a MID SIZE 2MXP20 dual polarity or cross polarized Yagis in a field environment and shoot for a record number of EME QSO's using this system

KP2M Virgin Islands - Radio reef your QTH in the Caribbean St. Croix, US Virgin Islands

DG2MAS Podcast blog - Funkamateur.org feat. amateurfunk podcast

KB2MOB Blog - Pilot of The Airwaves

K4TR Antennas - K4TR Manufacture and sell simple dipoles, half square 2 wire phased vertical arrays, end fed zepp antennas, G5RV antennas. 1:1 baluns

Rotating Tower Systems - Using our components you can build a rotating tower with greater capability than 3-4 static towers. A rotating tower allows common rotation of HF stacked arrays, VHF and UHF arrays, and antennas mounted at optimum heights. Component design also allows tower shunt loading and end support for wire antennas

The Gallery of the EME Arrays. - A Collection of EME Reflector Antennas and YAGI Arrays.

VectorFox - VectorFox is a software born to incorporate a PC into the fox hunting environment. VectorFox is able to take inputs from up to 5 sources, such as a 2m beam, a 2m signal meter, a TDOA, etc, and display the results on the screen. VectorFox also accepts Agrelo inputs. From these results the operator can choose which indication is best and have a line drawn on the map in the direction of the signal.

Pk232 and FT-1000 - Wiring the PK-232MBX to the Yaesu FT-1000MP or FT-990

Yaesu FT 857 specifications - Yaesu FT 857 technical details and pictures

KC7RYN IC-2100H Review - A brief review of the IC-2100 mobile 2m transceiver

Icom america - IC-V8000 page - IC-V8000 2M Mobile, power when you need it

IC-v8000 image - Large image by icom america

A 6M Transverter - Build a transverter based on a 6M receive converter. A 32MHz TTL oscillator is used as the local oscillator for both transmitting and receiving. RX/TX switching is handled by three SPDT relays.