3 ft radio

3 ft radio

Pages: [prev] 1 2 3 4 5 6 7 8 9 10 [next]

• Build a twin-lead Lindenblad Antenna for 70cm and 2m - This document contains the detailed instructions to build a homemade lindenblad antenna using a twin-lead as dipole elements. This document contains 9 pages and includes a detailed construction sequence and some drawings to build this antenna for UHF and VHF ham radio bands
  [ Hits: 1279 | Votes: 3 | Rating: 8.67 ]

• BOTA Beaches on the Air - Beaches On The Air is an award scheme for radio amateurs that encourages portable operation from beaches. You can participate from any country or region around the world. Our beach lists currently contain more than 30,000 beaches and aim to be as exhaustive and objective as possible, and are often based on official sources, such as environmental protection agencies.
  [ Hits: 144 | Votes: 1 | Rating: 10 ]

• SWR ANTENNA ANALYZER + WSPR TX - Available worldwide can be used as Arduino Shield or plug it in to you PC , or with a bluetooth adapter connect to Android. With a highly optimized software, KAI200 brings you: a. Antenna analyzer form 1 up to 200 Mhz; b. WSPR transmiter (set up by serial terminal); c. Square Wave Signal generator KAI200 is all you need for your radio whatever it is Yaesu, Icom, Kenwood or Drake and DIY projects.
  [ Hits: 327 | Votes: 8 | Rating: 9.62 ]

• A Elecraft KX2 to Yaesu FT-818 Comparison - A comparison of Elecraft KX2 and Yaesu FT-818
  [ Hits: 298 | Votes: 1 | Rating: 3 ]

• IC7300BKT Icom IC-7300 CAT Control - Windows PC control program for the Icom IC-7300 transceiver. Power-on and Power-off by software BktNetInterface for JTDX and WSJT-X, audio recording, memory management, cw keyer management, Interface for other software
  [ Hits: 463 | Votes: 2 | Rating: 7 ]
• IC-7300 Quick Start Guide - PDF document for IC-7300 beginners. The ICOM IC-7300 is an HF + 6 meter, multi-mode, self-contained Software Defined Radio (SDR) transceiver with knobs, buttons and a touch screen. It also has a real-time spectrum display with pan adapter and water fall displays.
  [ Hits: 697 | Votes: 2 | Rating: 8 ]

• 2.3GHz to 432MHz RX converter for FT-817 - A very small receiver converter that can be plugged to the backside of the battery powered portable transceiver FT817 from Yaesu. A high performance receiver for 2.3GHz amateur radio signal
  [ Hits: 223 | Votes: 3 | Rating: 1.67 ]

• Yaesu FT-991 Memory Manager - Free memory management software for the Yaesu FT-991 and FT-991A models. It runs only on Windows 7, 8, 8.1, 10 both 32 and 64 bits, it also permits basic remote control features and allow backup and restore settings and memories. Documentation in mainly in French.
  [ Hits: 1423 | Votes: 7 | Rating: 6.61 ]
• FT991 MARS Mod - This modification will expand the tx frequency range of the Yaesu FT-991 from allowing just ham radio bands, to all bands 1.8 - 30MHz and 50-54 MHz.This information is solely for use by licensed members of MARS (Military Affiliate Radio System) or CAP (Civil Air Patrol)
  [ Hits: 926 | Votes: 5 | Rating: 3 ]

• LAN-IQ SDR - Stand Alone Software Defined Radio, direct sampling receiver from 30 kHz to 1700.00MHz continuous frequency range, LAN interface for remote access
  [ Hits: 258 | Votes: 1 | Rating: 8 ]

• Baofeng UV-5 Programming Cable - Baofeng UV-5R uses RS232 to communicate or programming with the PC software and you can make your own programming cable with a few components.
  [ Hits: 439 | Votes: 2 | Rating: 7.5 ]

• xCAT xDAX for macOSX and FlexRadio 6000 - xCAT is an helper application for the FlexRadio 6000 series running on macOS computers to control via CAT protocol tranceivers, while xDAX purpose is to provide a way for Digital Mode Software like Fldigi, WSJT-X to access the digital audio data (DAX) of the FlexRadioTM
  [ Hits: 198 | Votes: 0 | Rating: 0 ]

• Win4YaesuSuite - Yaesu Radio Control - Win4Yaesu Suite is a commercial software for Yaesu FTDX and FT991 Radios. It includes support for SDRPlay and LPPAN panadapters. It interfaces to all third party hardware and software programs including HRDLogbook, DM780, DXLabsSuite, NAP3, N1MM+ and many more.
  [ Hits: 484 | Votes: 2 | Rating: 7.5 ]
• Win4IcomSuite ICOM Radio Control Software - The Ultimate Control Software for the IC-7300, IC-7610, IC-7600, IC-7850, IC-7851 and Others is a control software suite that includes additional interesting features such as support for the built in Spectrum Scope, Audio monitors, Shortwave DB, CW Terminal, Clublog Spotting, Memory management, interface to Ham Radio Deluxe Logbook, DM780, n1mm+, log4om, DXLab and other. Runs on Windows OS, commercial licence.
  [ Hits: 364 | Votes: 1 | Rating: 1 ]

• OpenRepeater for Raspberry Pi - OpenRepeater is a low cost, low power, but feature rich duplex repeater controller suitable for setting up a temporary / emergency repeater systems with radios that can be run on portable power. Download the latest OpenRepeater software for your Raspberry Pi 2/3/3B+/4. This image contains everything you need to get up and running quickly.
  [ Hits: 383 | Votes: 0 | Rating: 0 ]

• sodiraSDR - Software Radio - Software Defined Radio (SDR) for analog and digital modulation modes, can demodulate AM envelope, AM synchronous, AM stereo, LSB, USB, FM, FM Broadcast, DRM30, DRM+
  [ Hits: 363 | Votes: 4 | Rating: 8.75 ]

• BktTimeSync - BktTimeSync synchronizes the PC time using an internet time server (NTP server) or a GPS receiver connected to USB, serial port or Bluetooth. Great for use with digital modes like FT8, JT65, JT9, JS8Call and others. For the operation of this program requires an active internet connection or a GPS receiver. This program works on all versions of Windows 32 or 64 bit
  [ Hits: 1699 | Votes: 3 | Rating: 6.67 ]

• Compact GO-BOX with a Raspberry Pi4, Elecraft KX2 and Kenwood TH-D74 - A very compact and multifunctional digital amateur radio station for the radio operation at home, on the way or in the emergency radio implemented with a Raspberry Pi 4, an Elecraft KX2, a Kenwood TH-D74 and a USB GPS.
  [ Hits: 322 | Votes: 2 | Rating: 9.5 ]

• Hermes-Lite Low Cost HF SDR - The Hermes-Lite is a low-cost direct down/up conversion software defined amateur radio HF transceiver based on a broadband modem chip and the Hermes SDR project. It is entirely open source and open hardware, including the tools used for design and fabrication files. Over 300 Hermes-Lite 2.0 units have been successfully built.
  [ Hits: 519 | Votes: 0 | Rating: 0 ]

• Connect you MacOS to CAT Serial Port - How to connect an Apple MacOS to a USB Radio transceiver. Get a Mac driver for ICOM IC-7100, IC-7200, IC-7300, IC-7600, IC-7610, IC-7850, IC-9100, PCR2500, Kenwood TS-890S, TS-990S, TS-590S, Elecraft KX3, K3S, Yaesu FTdx3000, FT-891, FT-991 or Ten-Tec Eagle USB direct connect built in USB/Serial adapter.
  [ Hits: 230 | Votes: 0 | Rating: 0 ]

Pages: [prev] 1 2 3 4 5 6 7 8 9 10 [next]