30m windom

Multiband wire antennas and ATUs  ^pop - DC1YB experience on multiband wire antennas. In particular examine FD4 windom and G5RV antenna, considering noise levels and matching aspects. Author reviews also the usage of Automatic antenna tuners in TS-50 TS-480 and GC-3000

JA7KPI Windom antenna for 40-80 - The total length of this antenna is 41m, height is about 11m, and diameter of element is 2mm. JA7KPI modified this antenna originally used as Inverted-V type of 80m band Dipole. Works on 40 - 80 meters band with acceptable swr.

OH7SV Windom baluns - Windom baluns for kilowatt range made with two ferrite toroidal cores amidon ft-140-61 and another schema with two ferrite rods

Feeding an End-Fed Antenna  ^pop - End-Fed antennas are NOT balanced systems; but neither are verticals, ground planes, discones, windoms, zepps, Marconis, half-slopers, et al. Additionally, the low-impedance antenna port of your transmitter/receiver is not balanced.

Log Periodic of Another Sort - A log periodic dipole array (LPDA) antenna design that offer continuous low SWR in 13-30MHz range

6-Band Windom antenna  ^pop - Theory and construction of a novel trapless center-loaded off-center-fed (cl-ocf) dipole or windom antenna for the 80, 40, 30, 20, 15 and 10m hf amateur radio (ham) bands

What make the carolina windom so good - The off-center fed CAROLINA WINDOM provides outstanding performance on all bands. This includes all the WARC bands, 30, 17, and 12 meters.

Off Center Loaded dipole by LU1DMA - An OCF dipole project in spanish

Rhombic Antenna for 30m - 6m - Rhombics are high gain directive wire antennas

The FD4 (FD3) Windom Antenna  ^pop - The 4-band Fritzel model FD4 is a special version of a Windom antenna. It is a half-wave long on the lowest frequency, and is fed from a coax cable through a transformer inserted in the wire at one-third from one end

The Windom Antenna - Eight Bands On One Coax by kh2d

Windom Antenna - JA7KPI windom antenna page

Comparison of two windom antennas - The antenna comparison being reported was between a commercial Chelcom 136ft multi-band windom designed for 80m to 10m and a home brew 260ft full size windom designed for 160m to 10m by G0VVN, G3KAU and G3GRO

Windom for 80-40-20-10 m - A windom multiband antenna for 80 40 20 and 10 meters band. Include picture for a 1:6 Balun. In french

The Carolina windom antenna - Homebrewina a multiband windom antenna

Off-Center Feed - The Windom Antenna - The Windom antenna was widely used in the 1930s and is named after the amateur that wrote a comprehensive article about it

Windom Antenna with 4:1 balun - The Windom is an Off-center wire multiband Antenna. The old version was fed just by a single-wire connected on 1/3 of antenna's overall length or with an open-line feeder (later versions). Here is another model with coaxial feeder, which is compatible with Solid States - 50 Ohm output transceivers .

Windom antenna by PU1LHP - Project of a windom multiband antenna for 10 to 80 meters in portuguese

The FD4 Windom antenna - This antenna originated from darc QRV magazine in 1971 should be attributed to DJ2KT, works on 80 40 20 10 meters without ATU, based on the Windom principle.

HB9Z Internet Remote Base - A controllable TS2000 made available at HB9Z in switzerland. Antennas are Carolina Windom 160 for 160-10m, a 5-Element Beam for 20-15-10m a G5RV for 80-10m and a V2000-Vertical for 6m, 2m, 70 cm.

30 meters digital group - Group dedicated to 30 Meter digital activity on this unique HF band! All licensed Hams and SWLs anywhere are welcome to join in. Include live PSK 31 receiver, dx spots and event calendar

Anteny SP1BKS - Antenna manufacturer from Poland, produce dipole wire antennas, W3DZZ FD4 Windom and long wires, baluns, dealer for toroids and connectors managed by Leszek Mlynarczyk SP1BKS

30m QRSS Receiver - G0UPL QRSS receiver inspired by I1DFS receiver

G0UPL 30m QRSS Junkbox Beacon - This simple 30m QRSS beacon is built entirely out of junkbox parts, the only component purchased specifically for this project was the 10,140kHz crystal.

30m QRSS Beacon Transmitter - This beacon puts out about 0.5W on 10.140MHz. It is intended to be used for Slow Morse (QRSS) operation.