QM5 Yagi for 2 meters band
- The QM5 antenna is a simple 5 elements Yagi with 1.88 m boom length for the lower 144 MHz SSB/MGM band, I used it mainly for Sporadic-E and MS contacts. It exhibits a forward gain of 9.17 dBd; i.e. 11.3 dB forward gain over the isotropic radiator, while the F/R is about 11.5 dB. Elements
[ Hits: 5973 | Votes: 4 | Rating: 5.25 ]
- These yagis and groups were designed with YO7.23 from K6STI and checked with EZNEC from W7EL. With a gain of 14/17/20dBd they have a good relation between gain and mechanical problems.
A 6m portable 4 element quad
- This antenna is based on a design for a portable 2 element6m Quad by VE7CA, which is featured in the 19th Edition of the ARRL Antenna Handbook
[ Hits: 5959 | Votes: 21 | Rating: 8.35 ]
6 Meter 3 Element Quad
- Starting from an original project for a 2 element quad antenna for six meter band, ve7ca presents the dimensions for a 3 element version.
[ Hits: 7500 | Votes: 14 | Rating: 5.36 ]
Two portable antennas for 6-meter
- VE7CA reprint an interesting article taken from arrl antenna compendium. Two elegant practical and portable 6-meter gain antennas, a two-element quad and a tree-element Yagi antenna for 50 Mhz-6 meter band
The 5 Bands Wire-Beam
- This wire-beam has one radiator-element, feeded with 450-Ohm-Wireman-twinlead and needs an antenna-tuner. For the bands 6m, 10m, 12m, 15m, 17m and 20m bended reflector-elements are used.
The support is a cross of 4 fibreglass-fishing-rods
Cubical Quad Antenna Designupdatedpop
- By N6VNG, can be used to determine the element lengths and the gamma match values for different frequencies, includes link to excel files with formulas to dimension your quad antenna.
- The file MEI-10.ZIP contains educational software to evaluate antenna arrays of up to 8 elements. Two types of arrays may be studied: 2D planar arrays (Yagi-Uda, Circular, etc., up to 6elements) and colinear arrays (up to 8 elements.)
[ Hits: 3890 | Votes: 4 | Rating: 3.00 ]
Smith Chart Software
- SimSmith is a highly interactive, real time Smith chart graphing program. Circuits are constructed using drag-n-drop. Load files can be imported from the EZNEC and CocoaNEC antenna simulation software and from the AIM4170 and miniVNApro antenna analyzers. Circuits and load files can be of any size.
Key Features: SimSmith is one of the few Smith chart packages which models transmission line losses. SimSmith also allows the description of circuit elements using algebraic equations. SimSmith has only one screen and allows the screen to be resized to increase workspace or readability.