6m beacon

Dual band 6m/4m Yagi - This antenna was optimized with the goal to minimize any changes in 6jxx6 impedance/lobes. The result is a 7 el on 70 MHz with a little loss of gain comparing with the other monobands of the same lenght.

YU7EF Pop 6 & 7 Elements antenna - YU7EF Pop 6 elm for 50Mhz and 7elm for 70Mhz, a 4+6m douband with 12mm Alu tubing

G8JNJ Broadband HF Vertical Antenna - G8JNJ Broadband HF Vertical Antenna - Requires no tuner - great results from 40m to 10m plus 80m & 6m with reduced performance

Build a 10 Meter Beacon - How to build a beacon keyer by Tom Sevart N2UHC

DF4PV EME and Beacon station - EME radiocommunication and DM0ING beacon station

10-m-Bakenstation DK0TEN - 28.2575 MHz Beacon from Lake Constance water works Germany

DLØIGI - 28 MHz Beacon - 28.205 MHz Beacon in JN57MT Distrikt Oberbayern (C)

I8EMG-B - I8EMG is running several beacons from 10 meters to microwaves

IK1ZYW 10m QRSS QRPP Beacon - Describes IK1ZYW 10m beacon running QRSS

F5ZWE Beacon station - Operating in 28.243 Mhz as F5ZWE/B

C30P Beacon - Amateur radio station c31lj andorra 28.256 MHz

WE4S 10 Meter Beacon 28.221 Mhz - Beacon website of WE4S, Grady Donaldson, located in McDonough, GA. EM73TM.

ZS6DN_3 - A view of the NCDXF Multiband beacon and a cluster of stacked yagi antennas.

10 Meter Synchronized Propagation Beacon Project - Project started by several 10 meter beacon operators in an ad-hoc fashion to experiment with operating 10 meter beacons similar in concept to the IARU beacon project

WC9C Beacon - TX on 28.265 from Pimento, IN

4S7B Sri Lanka Beacon - IARU NCDXF Beacon in Sri Lanka 4S7B working on 14.100, 18.110, 21.150, 24.930, and 28.200

YB9BWN Beacon - Homebrew crystal-based with IRF510 PA at 2W into a dipole

WA8YWO - High Frequency Expermental Beacon "WV". The Beacon operates on the frequency of 13.55567mhz. This Beacon is very low power. It operates under Part 15 of the FCC Rules and Regulations. It transmits with only 1.5 milliwatts of power

OZ7IGY - The worlds oldest vhf-uhf beacon

OH Beacons - List of OH beacons running on HF VHF and higher frequencies

Acom 1000 70 Mhz modification - ACOM 1000 modification uses electric band switching, such that both 6m and 4m operation can be maintained.

ICOM IC-706MKIIG Tech Note - If your IC-706MKIIG will not power up without even hearing a relay click, check the state of the HV line.

144 Mhz Dirty Beacon project - VHF beacon keyer by 9A4QV

Building of CU 4m Beacon CU8DUB/b - Beacon is based on a old 4m Storno CQF632 from PA who OZ2M got in Weinheim

New Generation Beacon Driver - As used on the new GB3VHF 144.43MHz Beacon