706 microphone

Let's talk transmission lines - Don’t neglect one of the most important parts of your station!

IC706/FT817 portable whip antenna - Suitable antenna for owners of an IC706 or FT817, 857 and other HF portable transceivers. You can an be QRV in a few minutes on all ham-bands from 80m to 6m and even on 2m by PA0FBK

Art's Antique Radios - A good reference site for antique radio, bakelite paskon plastinc decription, microphones picture and antique radio gallery

Better RF company - Pre-recorded voice keyers, Tune controls for Yaesu FT-100, FT-857 and FT-897, Icom IC 706 and IC 718

The ElectraSlide Antenna - Modification of the DK3 design by Don Johnson, W6AAQ. No voltage dropping, operates on the full 12 volts. The control switch and the matching toroid are supplied. All you need is a standard 3/8 by 24 thread ballmount, 2 wire sheilded microphone cable for control wiring, and a CB whip cut to resonance.

Shure Incorporated - Microphones and Audio Electronics - Shure incorporated, microphones and audio electronics

Behringer - High quality audio systems

XLT Communications - XLT Communications two way radio accessory manufacturer, microphones, headsets, belt clips, earpieces, radio cases

The Mobile Ham Installation - Article on ham radio mobile operation from Andy D. Crouch N5NDD

Aero Mobile Ham Radio - Aero mobile with the ICOM 706MKIIg By Chuck Forsberg WA7KGX

706MKIIG Mobile Mount - This page describes a very simple and inexpensive mobile mount for an ICOM 706MKIIG radio

Work satellite with single IC-706MKIIG - You wanna try to work modern satellite like AO-40 but have only one rig ICOM-706MKIIG ? This article will help you.

Boom microphone - A boom mic for the Yaesu FT 897 857 and IC-7000 done modifying a cheap PC headset by G8JNJ PDF File

Yaesu FT 897 usage during a contest - A yaesu FT-897, and an Icom 706 used portable in a tent during a contest by AG4ZR and KI4ASK

Icom 706 Major Defect Found - WA6CDE write about a major problem, a design flaw on two Icom 706 caps that have corrosive liquid that can seriously damage this icom transceiver.

ICOM IC-706MKIIG Tech Note - If your IC-706MKIIG will not power up without even hearing a relay click, check the state of the HV line.

Kenwood Mc-60 to Icom IC746 - Connecting the Kenwood MC60 microphone to an Icom IC746

Microphones clip art - coolclips.com microphones clip arts available for personal use

RUMLog - RUMlog is a short-wave logging and QSL handling/printing tool for MacOSX RUMlog is available with an interface for transceiver control. Supporting Kenwood, Elecraft and ICOM. (IC-7400/IC746PRO, IC-7000 and IC-706)

DroidPSK  ^updated - DroidPSK is an application to decode and encode Ham Radio BPSK31 with the build in microphone/speaker or wired to your radio.

CwGet PPC Priority listing - A program to decode Morse code via sound input of PDA to text. No additional hardware required - your need only receiver and PDA with sound input. Built-in microphone of device can be used also.

Audio processor for SSB transceiver - This circuit consists of microphone amplifier and a high pass filter. Suitable to improve signal readability.

Home Brew a Condenser Microphone - An inexpensive condenser microphone with excellent performance can be easily constructed with easily available parts.

Microphone connections by G4WPW - Roy G4WPW has collected one of the most complete and interesting pages for microphone connections schemas and wiring. Includes Kenwood microphones schematics as well as Yaesu Icom Alinco Adonis Drake Heil JRC MFJ schematics

Kenwood TR-7950 Microphone Pinout - If you are looking on TR 7950 mic wiring, here you will find what you need.