8 element

The DXZone.com

8 element

111 links - and 1 categories

Antennas : 10M
  • 2 Element Wire Yagi for 10 meters band - A page with an embedded video about a two elements yagi antenna for 28 MHz based on the original antenna design by VE7CA
    [ Hits: 277 | Votes: 1 | Rating: 8 ]
  • 5 element Yagi antenna for 10 meters band - This 10 meter antenna is right out of the ARRL Antenna Book. There are 5 elements on a 24 feet boom and it performs well from 28.0 to 28.9 MHz.
    [ Hits: 188 | Votes: 2 | Rating: 6 ]
Antennas : 160M Antennas : 20M : 20 meter Yagi antennas
  • 2 element Yagi for 20 meter - This antenna was designed for the CQ WW CW 2009 at EA8URL. All elements are made out of fishing rods with an insulated copper cable fixed on the rods by cable ties. Both fishing rods and cable are UV resistant.
    [ Hits: 630 | Votes: 2 | Rating: 5 ]
Antennas : 23cm
  • 43 Elements Yagi Antenna for 23cm band - An interesting presetnation full of usefull tricks to correctly design and build 23 cm Yagi using simple tools. The basic design of the antenna presented in this document is taken from the original DL6WU Yagi Design published in 1982
    [ Hits: 423 | Votes: 1 | Rating: 8 ]
  • 35 Element Yagi Antenna for 23cm - Antennas for the 1296 MHz based on the construction plans of some Yagis 35 elements by DL6WU, F9FT, DJ9YW. These antennas features a boom of about 3 m and gives a gain of about 17.8 dBd
    [ Hits: 206 | Votes: 1 | Rating: 7 ]
Antennas : 2M
  • YU7EF 6 element 2m Yagi - YU7EF EF0206 2m Band 6 Element Yagi Antenna project, provides 11.8 dbi gain
    [ Hits: 228 | Votes: 2 | Rating: 8.5 ]
  • Lightweight 144 MHz Yagi antenna - A Lightweight 2m Yagi for SOTA. The boom is 20mm PVC electrical conduit and the elements are 2.4mm aluminium TIG welding rod. The antenna is carried as a single length of conduit with the elements stowed inside the boom, sealing them in with a bung. The driven element is connected directly to 50 Ohm coax with a BN-43-202 balun core to decouple the coax shield.
    [ Hits: 176 | Votes: 0 | Rating: 0 ]
  • An 8x2 Element Array Antenna For 144 MHz - This stacking offers a well known simple phasing technique. All elements can be fed in parallel by open wires provided that they are fed in phase. This can be achieved by twisting the open wire phasing-lines at 180 degrees.
    [ Hits: 164 | Votes: 0 | Rating: 0 ]
Antennas : 6M
  • Six meter dipole project - Design and build an 6 m dipole antenna from aluminum, tubing, that resembles the active element of a yagi beam antenna.
    [ Hits: 884 | Votes: 1 | Rating: 9 ]
Antennas : 6M : 6 meter Moxon Antennas
  • 6 Meter Band Moxon Style Antenna - Design and build a 6 meter 2-element Moxon antenna mostly from available aluminum tubing and angle stock.
    [ Hits: 608 | Votes: 1 | Rating: 1 ]
Antennas : 6M : 6 meter Yagi Antennas
  • 6 Elements Yagi Antenna on 50 MHz - This is a design based on the QuickYagi 4 software by WA7RAI with some changes for practical reasons. The beam uses 6.5 metres of standard 25mm square boom, 12mm diameter elements without tapers. The actual boom length used is 6.3 metres and all parts are readily available.
    [ Hits: 131 | Votes: 2 | Rating: 6 ]
  • Homebrewing a 6 Meter Yagi - Six meters is a great band for home built Yagis. The elements are reasonably small, but not so small that building tolerances are critical. With careful construction and detailed instructions, it is certainly feasible to build no-tune Yagis up to 432 MHz.
    [ Hits: 464 | Votes: 0 | Rating: 0 ]
Antennas : Fan Dipole
  • VE6LK Fan Dipole - Multiband dipole antenna working on 80-40-20-15m, a 3 element antenna, 15m being a 3rd harmonic of 40.
    [ Hits: 161 | Votes: 1 | Rating: 10 ]
Antennas : Folded Dipole
  • Folded Dipole Antennas - The folded dipole antenna or folded dipole aerial is widely used, not only on its own, but also as the driven element in other antennas like the Yagi antenna and various other types of antenna. Folded Dipole Myths, Bandwidth and details on folded dipoles
    [ Hits: 435 | Votes: 7 | Rating: 3.57 ]
Antennas : Lindenblad
  • Build a twin-lead Lindenblad Antenna for 70cm and 2m - This document contains the detailed instructions to build a homemade lindenblad antenna using a twin-lead as dipole elements. This document contains 9 pages and includes a detailed construction sequence and some drawings to build this antenna for UHF and VHF ham radio bands
    [ Hits: 1268 | Votes: 3 | Rating: 8.67 ]
Antennas : Quad
  • A Simple 2 Element Quad Antenna for 10 meters - Quads beams consist of 2 1 wavelength (approximately) loops, ordinarily arranged so that one is the driven element and the other is the reflector. In this project author explains how to build a two element Quad Antenna for the 28 MHz.
    [ Hits: 271 | Votes: 1 | Rating: 7 ]
Antennas : VHF UHF
  • A cheap VHF UHF Yagi - Elements are aluminum TIG soldering rods 4.0mm of diameter, almost 1m long, these objects are light, thin and flexible based on the RZ9CJ Design
    [ Hits: 270 | Votes: 3 | Rating: 9.67 ]
Antennas : W3DZZ
  • W3DZZ Multiband Antenna - An easy to build and extremely high performance antenna, works perfectly on all HF bands 3.5-28 MHz with some compromises, it is basically an half wave dipole for 40-80 meters, an LC circuit or trap 40 meters allows you to use a single radiating element.
    [ Hits: 463 | Votes: 3 | Rating: 7.67 ]
Antennas : Yagi
  • 13 Elements Yagi for 144 MHz - A homebrew 13 elements yagi antenna for two meters band. These project includes two model of the same antenna with a 6 and 7 meter boom length. Detailed pictures and nec files are available for download
    [ Hits: 142 | Votes: 0 | Rating: 0 ]

Not satisfied ? Lookup Google Custom Search Engine for 8 element


Search 8 element with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search