8 mhz antenna

184 links

2 Element Wire Yagi for 10 meters band - A page with an embedded video about a two elements yagi antenna for 28 MHz based on the original antenna design by VE7CA
[ Hits: 283 | Votes: 1 | Rating: 8 ]
A Low Profile 10 Meter Antenna - A simple vertical whip antenna for 28 MHz with three radials made of 8 foot pieces of scrap wire and a 102 inch whip
[ Hits: 471 | Votes: 2 | Rating: 9.5 ]

Short DL6WU yagi for 23cm - 1260 MHz yagi antenna for ATV with a total Bandwidth (3 dB) 1240-1280 MHz and 10 dBd gain
[ Hits: 139 | Votes: 1 | Rating: 4 ]
DL6WU Yagi Antennas for 1200 MHz - Dubus article about DL6WU long yagi antennas for 23 cm band Article is both in german and english. Yagi antennas are valid alternative to dishes for troposcatter operations. This article explains design and mechanical data for 1296 MHz Yagi Antennas
[ Hits: 324 | Votes: 1 | Rating: 10 ]

Lightweight 144 MHz Yagi antenna - A Lightweight 2m Yagi for SOTA. The boom is 20mm PVC electrical conduit and the elements are 2.4mm aluminium TIG welding rod. The antenna is carried as a single length of conduit with the elements stowed inside the boom, sealing them in with a bung. The driven element is connected directly to 50 Ohm coax with a BN-43-202 balun core to decouple the coax shield.
[ Hits: 180 | Votes: 0 | Rating: 0 ]
An 8x2 Element Array Antenna For 144 MHz - This stacking offers a well known simple phasing technique. All elements can be fed in parallel by open wires provided that they are fed in phase. This can be achieved by twisting the open wire phasing-lines at 180 degrees.
[ Hits: 165 | Votes: 0 | Rating: 0 ]

Linear Loaded 40m Dipole - Dipole for 40m band. It is a simple linear loaded dipole feeded with 450-Ohm openwire feedline. Designed it for resonance at 7.050 MHz, can be tuned on 30m and 80m bands with an external antenna tuner. Build with simple electrical copper wire (2.5 mmq/13 awg) and two fishing poles with size of about 7 m/23 ft.
[ Hits: 162 | Votes: 0 | Rating: 0 ]

Halo and Stub antenna for 50MHz and 70MHz - Omni-directional mixed polarisation antenna for 50MHz & 70MHz. This is a simple Halo and Stub antenna which provides an omni-directional radiation pattern with mixed polarisation, which I built for use with the SUWS WEB SDR
[ Hits: 137 | Votes: 1 | Rating: 9 ]
50 MHz CLC antenna - A small antenna for 50 MHz made with copper cable loading coils
[ Hits: 250 | Votes: 0 | Rating: 0 ]

J-Pole Antenna for 50 MHz - This J-Pole is mounted on a fishing rod. The radiator L1 is an isolated copper-wire with a length of 281,5 cm while the quarter-wave matching sector L2 is made with 450-Ohm-Wireman-cable
[ Hits: 223 | Votes: 0 | Rating: 0 ]
Buddipole as a J-Pole for 50 MHz - How to setup and configure the buddipole antenna in the J-Pole mode for the six meter band
[ Hits: 303 | Votes: 0 | Rating: 0 ]

TriBand Moxon Antenna for 6m 4m 2m - A PDF presentation of a home made moxon antenna for 50 MHz 70 MHz and 144 Mhz. The project is mainly out of surplus plastic Plumbing pipes and clips etc, and also details of how the dimensions were calculated.
[ Hits: 1367 | Votes: 7 | Rating: 7.11 ]

6 Elements Yagi Antenna on 50 MHz - This is a design based on the QuickYagi 4 software by WA7RAI with some changes for practical reasons. The beam uses 6.5 metres of standard 25mm square boom, 12mm diameter elements without tapers. The actual boom length used is 6.3 metres and all parts are readily available.
[ Hits: 134 | Votes: 2 | Rating: 6 ]

Homebase 10 - The Homebase-10 is a simple to make wire halo antenna for 10m (28MHz) built using parts available from the local DIY store. The resulting antenna is very effective on 10m despite its small size and light weight. Also shown is a dual-band version for 10m and 6m.
[ Hits: 327 | Votes: 1 | Rating: 3 ]

Portable magnetic loop antenna - A portable loop antenna, made with a 3 meter loop resonates with the chosen capacitor from just below 7MHz to about 28.300MHz which makes it usable on the bands from 40m to 10m.
[ Hits: 167 | Votes: 2 | Rating: 9 ]

Multiband trap dipole - This antenna is a classical antenna working on 7,10,14,18,50 MHz is implemented with three traps for 30, 17 and 6 meters
[ Hits: 271 | Votes: 0 | Rating: 0 ]

Portable NVIS Loop for 80m to 40m - A portable (15.5 foot diameter) NVIS loop for 3.5 to 7.3 MHz. Performs well at high and low takeoff angles, and has smaller footprint than most NVIS antennas.
[ Hits: 367 | Votes: 0 | Rating: 0 ]

A Simple 2 Element Quad Antenna for 10 meters - Quads beams consist of 2 1 wavelength (approximately) loops, ordinarily arranged so that one is the driven element and the other is the reflector. In this project author explains how to build a two element Quad Antenna for the 28 MHz.
[ Hits: 273 | Votes: 1 | Rating: 7 ]

A 3.5MHz Receiver for SSB and CW - Homemade receiver for 80 meters band. The receiver works very well (in fact better than some of its successors), especially the AGC makes listening to 80m QSOs a real pleasure. Sensitivity is not cutting-edge, but on a full-size short-wave antenna it is by fare sensitive enough.
[ Hits: 250 | Votes: 2 | Rating: 6.5 ]

Transverter for 50 70 28 MHz - This multiband transverter project features power output at 13,8V 50MHz 15W, 70MHz 10W, second harmonic <65dBc. Single N connector of antenna, suitable for a dual band Yagi. Article include Block Diagram for Dual Transverter and low pass filters
[ Hits: 153 | Votes: 1 | Rating: 10 ]