- Top Loaded vertical antenna for 40m Band with elevated radials
Top loaded vertical
- Vertical Antenna for 40m Band with elevated Radials
Top Load is a Mesh 2 x 1 meter (Netz 2x1m)
enamelled wire 0.5 mm diameter (CuL 0,5mm)
JA7KPI Windom antenna for 40-80
- The total length of this antenna is 41m, height is about 11m, and diameter of element is 2mm.
JA7KPI modified this antenna originally used as Inverted-V type of 80m band Dipole.
Works on 40 - 80 meters band with acceptable swr.
The Simple Collinear
- Wherever there is a need for a vertically polarized omni-directional antenna with gain, a collinear is used. The vertically polarized collinear takes the form of two or more half waves in-line and in-phase, resulting in an omni-directional pattern with maximum radiation near the horizon.
Omni-Gain Vertical Collinear Antenna
- This rugged antenna, an omnidirectional collinear, is capable of surviving harsh environments. It's a good choice for repeater installations and can be top, or side mounted to the tower by WA6SVT
Home-brew Compact 6dBi Collinear Antennapop
- This page details the construction of an easy-to-make collinear 360 degrees omni-directional, vertically polarised, antenna for 802.11b/g wireless networking.
Feeding an End-Fed Antennapop
- End-Fed antennas are NOT balanced systems; but neither are verticals, ground planes, discones, windoms, zepps, Marconis, half-slopers, et al. Additionally, the low-impedance antenna port of your transmitter/receiver is not balanced.
Quarter Wave Verticals
- One of the most useful antennas in the repertoire is the Marconi or quarter wave grounded vertical antenna. Its invention made it possible to halve the length of antennas, simplifying communications, especially at HF and below.