antenna 5 mhz

antenna 5 mhz

Pages: [prev] ... 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [next]

• YBN 28-5w - 5 Elements Yagi for 28 MHz - A 5 element yagi beam antenna for ten meters band with full dimentsions, eznec file and coax match informations for 50 ohms feed line
  [ Hits: 917 | Votes: 4 | Rating: 3 ]

• Super Trombone Antenna - Tombone VHF antenna for 146 MHz ad designed by YB8EIP
  [ Hits: 2745 | Votes: 8 | Rating: 5.75 ]

• 60 Meter EF-HW antenna - 60 Meter End Fed Half Wave Antenna Tuner with large pictures of the 5 MHZ antenna tuner
  [ Hits: 565 | Votes: 5 | Rating: 9.4 ]

• Weather Resistant Field Antenna for 50 MHz - Photo construction manual of a portable antenna made with two heavy duty whips by buddipole. In this article has been implemented a 50 MHz portable dipole.
  [ Hits: 811 | Votes: 1 | Rating: 10 ]
• Omni-directional Antenna for 50 MHz - This simple project, based on the orginal CobWebb-Antenna model, is about an horizontally polarized, omi-directional antenna for the six meter band.
  [ Hits: 544 | Votes: 2 | Rating: 7 ]

• 6m Jpole antenna - A J-pole antenna plan for 50 MHz based on the DK7ZB design
  [ Hits: 480 | Votes: 0 | Rating: 0 ]

• Homebrewing a 6 Meter Yagi - In this PDF article Zack Lau describe how to homebrew a four element yagi beam antenna for 50 MHz band, including how to build mounting blocks and tubing clamps to hold elements.
  [ Hits: 963 | Votes: 2 | Rating: 5.5 ]
• 2 elements Folded Yagi Antenna for 6 Meters - 50MHz Collapsible 2 Element Mini Beam antenna, an overview the development of the 6MBA.
  [ Hits: 739 | Votes: 1 | Rating: 10 ]
• 2 element Yagi for 50 MHz - This 6 meter 2 element yagi antenna is simple, compact and effective antenna for 50 Mhz. The design antenna was optimized with AO for best match to 50 ohms, no matching network. A choke balun is recommended to decouple feedline currents.
  [ Hits: 533 | Votes: 3 | Rating: 3 ]
• 3 Element Beam for 50 MHz - A six meter band 3 element yagi beam antenna project with shortened elements using coax cables with the outer ends stripped and the center conductor shorted in somewhat of a Bazooka antenna.
  [ Hits: 424 | Votes: 1 | Rating: 8 ]

• 50 MHz Delta Loop - A simple delta loop antenna antenna for the six metre amateur radio band
  [ Hits: 1902 | Votes: 4 | Rating: 6.5 ]

• 80M 4-Square - An antenna project to obtain a bigger signal on the 80 Meter (3.5 to 3.8 MHz) amateur radio band
  [ Hits: 837 | Votes: 0 | Rating: 0 ]
• 15m Four Square antenna - A 21 MHz Four Square Beam Antenna This popular antenna for the lower bands, can also work well on 15 meters, QST Article
  [ Hits: 1357 | Votes: 0 | Rating: 0 ]

• A Dual Band VHF/UHF J Pole - This antenna provides continuous coverage of the 2 metre (144-148MHz) and 70cm (430-450MHz) bands and is an excellent choice for base station use.
  [ Hits: 2282 | Votes: 17 | Rating: 6.83 ]

• A Small Loop for 20 and 15 meter band - A Small Transmitting Loop Antenna for 14MHz and 21MHz, an antenna you might consider if you have limited space, Based on material originally published in Amateur Radio, November 1991
  [ Hits: 421 | Votes: 0 | Rating: 0 ]
• Magnetic Loop for the 2m band - Such kind of omnidirectional antenna gives the possibility to be QRV with horizontal polarisation, as commonly used for the CW and SSB section of the 2m band. This actual design shows a 1.3:1 bandwidth of about 150kHz, centered to 144.200MHz.
  [ Hits: 573 | Votes: 1 | Rating: 10 ]

• A 146- and 445-MHz J-Pole Antenna - Pipe your signals to 146 and 445 MHz with one antenna!
  [ Hits: 1531 | Votes: 3 | Rating: 8 ]
• DIY Dual Band 144-440 MHz vertical antenna - A homemade VHF/UHF vertical antenna made essentially with RG58 coax cable, with a 9 turns choke balun to prevent the shield acting as a RF Radiator.
  [ Hits: 1376 | Votes: 14 | Rating: 5.5 ]

• 3 Element Yagi Antennas for 144 MHz SSB-CW - A great and efficient monoband VHF portable antenna. The article consist of two version of a 12.5 Ohm 3 elements yagi beam antenna plans for the two meter band, a full sized and a shortened version expecially designed for the SSB and CW on 144 MHz.
  [ Hits: 427 | Votes: 4 | Rating: 8 ]

• QRO Coaxial Relay for 50 MHz - Build a SPDT coaxial relay that can be used as a main Transmit/Receive relay or an A-B switch to select between two different 6m antennas
  [ Hits: 362 | Votes: 0 | Rating: 0 ]

Pages: [prev] ... 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [next]