antenna design

The DXZone.com

antenna design

457 links - and 1 categories

Antennas : 2M
  • 2 Meter 10 Element Quagi Antenna - This antenna was designed by N6JSX Kuby for Transmitter hiding. Fitting the requirements of directionality, high gain, and portability. This antenna was derived from the ARRL Handbook information on Quagi's and Yagi's; in the absence of two meter Quagi information, UHF Quagi dimensions were scaled into 146 MHz use.
    [ Hits: 15653 | Votes: 32 | Rating: 7.06 ]
  • Quagi and Yagi on 2 Meters - Designing quagi and yagi antennas on 2 Meters, some preliminary notes by Cebik, W4RNL
    [ Hits: 4161 | Votes: 4 | Rating: 3.25 ]
Antennas : 6M Antennas : Feed Lines : Choke
  • Choke balun - Essentially, a choke balun is designed to 'divorce' your antenna from the feed line. if your feed line is coaxial cable then you don't want it to be part of your antenna. you want to be able to deliver all your power to the radiator itself, i.e. 'the antenna'. a choke balun does this admirably
    [ Hits: 573 | Votes: 11 | Rating: 7.27 ]
Antennas : Helical
  • A 16 Turn S-Band Helix - This design represents the smallest practical antenna for Oscar-13 mode-S. Perfect beacon reception at all times is possible, and acceptable SSB even at 43,000 km range.
    [ Hits: 8906 | Votes: 4 | Rating: 7.5 ]
  • 13 cm Helix Antenna  pop - Here is the design of a 2.4 GHz antenna that is ideal for amateur satellite communications. This antenna is easy to assemble because the design itself tolerates inaccuracies in the construction without really affecting performance.
    [ Hits: 65534 | Votes: 90 | Rating: 6.04 ]
Antennas : J-Pole Antennas : Magnetic Loop
  • Loop Antenna Design - Full-wave loops are very popular antennas. They are especially useful on 80 and 40 meters where they perform well at modest heights
    [ Hits: 2292 | Votes: 1 | Rating: 10 ]
Antennas : Quagi
  • Quagi Designer - Quagi antenna design, this little windows application let you calculate dimensions of elements and spacing of a quagi antenna. Freeware by VE3SQB
    [ Hits: 5667 | Votes: 24 | Rating: 4.91 ]
  • 2m Quagi Antenna plan - A design of a 2 m quagi antenna by TA2IB
    [ Hits: 4566 | Votes: 35 | Rating: 8.35 ]
Antennas : Satellite
  • K5OE, 70 cm Quagi Antenna - An AO-10 antenna by K5OE, this design is optimized for 436.8 mHz with a 50 Ohm feed
    [ Hits: 5343 | Votes: 5 | Rating: 7.4 ]
Antennas : Tuners
  • N4EKV.COM - Antenna Tuners - Homebrew balanced-L antenna tuner. Covers 160-10m. Designed specifically for balanced feedlines.
    [ Hits: 4727 | Votes: 2 | Rating: 10 ]
Antennas : WiFi
  • Helical Antenna for 2.4 GHz and 802.11b - The following page details construction of a Helical antenna based on the superb design by Jason Hecker.
    [ Hits: 5309 | Votes: 6 | Rating: 7.17 ]
  • How to build a tin can waveguide antenna  pop - Looking for an inexpensive way to increase the range of your wireless network? A tin can waveguide antenna, or Cantenna, may be just the ticket. This design can be built for under $5 U.S. and reuses a food, juice, or other tin can.
    [ Hits: 37647 | Votes: 45 | Rating: 7.46 ]
  • PringlesCantenna - Seattle Wireless - The PringlesCantenna is an ultracheap Yagi-type directional antenna that can be built for under $10. The original Pringles Yagi was designed by Andrew Clap.
    [ Hits: 9417 | Votes: 5 | Rating: 6.8 ]
  • 2.4GHz Cubic Quad Antenna  pop - The Cubic Quad antenna is a commonly homemade antenna in the range of about 150 odd MHz. Our little project was to design one of these for use in the 2.4GHz range for 802.11 wireless LANs.
    [ Hits: 37191 | Votes: 70 | Rating: 5.46 ]
Manufacturers : Antenna Parts
  • The KO6YD Screwdriver Antenna Memory - The Screwdriver Antenna Memory (SAM) product is designed to enhance the mobile antenna commonly called the "Screw Driver". It replaces your current control unit and provides an automated memory feature that eliminates the visual coil tuning method commonly used.
    [ Hits: 3098 | Votes: 4 | Rating: 7.5 ]
Manufacturers : Towers and Accessories
  • Rotating Tower Systems - Using our components you can build a rotating tower with greater capability than 3-4 static towers. A rotating tower allows common rotation of HF stacked arrays, VHF and UHF arrays, and antennas mounted at optimum heights. Component design also allows tower shunt loading and end support for wire antennas
    [ Hits: 1368 | Votes: 3 | Rating: 6.33 ]
Shopping and Services : Regional : USA
  • RadioLabs - Radio, Wireless and Beyond - Specialize in engineering, design and repair of all rf equipment. Dealer for two way radios, scanners, shortwave radios, wi-fi antennas, wifi amplifiers. Based in Fortuna, California.
    [ Hits: 831 | Votes: 5 | Rating: 5.8 ]

Not satisfied ? Lookup Google Custom Search Engine for antenna design


Search antenna design with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search