arduino cw

arduino cw

Categories

Pages: 1 2 [next]

• Arduino QRP transceiver - An HF QRP CW RTX built around the Arduino open-source electronics prototyping platform
  [ Hits: 6070 | Votes: 10 | Rating: 6.01 ]
• Yaesu FT-817 Arduino Controlled Beacon - An example of how to control a Yaesu FT-817 with an Arduino to make a multi-band CW beacon.
  [ Hits: 1109 | Votes: 1 | Rating: 1 ]
• Arduino TNC - An Arduino project to make it work as a KISS TNC
  [ Hits: 1905 | Votes: 2 | Rating: 9.5 ]
• CW Decoder With Arduino Uno - Easy to build CW decoder based on DSP Goertzel code. If you want to build a cw decoder without using other active components than an atmel 328, Arduino UNO, then this is sure something for you.
  [ Hits: 709 | Votes: 4 | Rating: 8.75 ]
• PI4ino - A Generic Arduino Beacon Controller - Generic PI4 + CW + Carrier Arduino Beacon Controller with interfacing to Analog Devices AD9833 DDS AD9850 DDS, AD9851 DDS, AD9912 DDS , AD9913 DDS, ADF4350 and ADF4351 synthesizers, ADF5355 synthesizer, ADF5356 synthesizer, Radio modulated by an audio soft-DDS Reverse DDS, RDDS microwave unit, Silicon Labs Si5351A programmable clock generator, Silicon Labs Si570 programmable XO/VCXO, Texas Instruments LMX2541 synthesizer
  [ Hits: 1736 | Votes: 7 | Rating: 7.71 ]
• Arduino Iambic Keyer and Side Tone Generator - A project to implement a simple and efficient CW Keyer and a side tone generator with Arduino
  [ Hits: 611 | Votes: 0 | Rating: 0 ]
• Arduino CW Terminal - This article describes firmware and minimal hardware for encoding and decoding of on-air CW using an terminal/modem based on these controller boards.
  [ Hits: 678 | Votes: 0 | Rating: 0 ]
• Arduino TNC - An Arduino TNC modem project based on KI4MCW source code with pictures and schematics
  [ Hits: 1150 | Votes: 2 | Rating: 10 ]
• Arduino ACCU Keyer - A simple accu keyer made with Arduino that works well with QRQ CW. Free to download arduino sketch and youtube video demonstration.
  [ Hits: 236 | Votes: 0 | Rating: 0 ]

• Arduino CW Keyer - Open source Arduino based CW (Morse Code) keyer with a lot of features and flexibility, often rivaling commercial keyers.
  [ Hits: 5210 | Votes: 12 | Rating: 7.49 ]
• A Remote Morse Key - A simple DIY project to have a remote cw key connected to your Rig. On the remote side it uses and Arduino Uno board and a cheap HanRun Enc28J60 ethernet shield. On the local side it uses a Morse Key connected to a serial port.
  [ Hits: 443 | Votes: 1 | Rating: 1 ]
• Arduino Based Morse Beacon - An Morse Code CW beacon keyer done with arduino include the source code and a movie
  [ Hits: 1049 | Votes: 0 | Rating: 0 ]
• OZ1EDR Arduino CW Decoder - PCB samples and Arduino cw program by Danish Clubstation Hilleroed
  [ Hits: 464 | Votes: 0 | Rating: 0 ]
• ARDUINO CW decoder - Yet another Arduino CW Decoder based on the OZ1JHM prototype this include a custom program that can be downlaoded along to component list and pictures
  [ Hits: 869 | Votes: 1 | Rating: 6 ]
• CW Trainer - Arduino Project - Hone your Morse code skills with this entry-level project. Article includes the full schematic of the CW Trainer, describes the sketch and how to operate the morse code trainer.
  [ Hits: 615 | Votes: 0 | Rating: 0 ]

• Morse Code Beacon Keyer - This circuit stores a morse code message as bits in an EPROM chip, the message controls a relay that keys a CW morse code transmitter. An Arduino processor can also be used in place of this circuit, that eliminates the need to build the circuit and program an EPROM.
  [ Hits: 381 | Votes: 0 | Rating: 0 ]

• NanoKeyer - An Arduino based CW contest keyer addon, ideated and designed for the use in conbination with the K3NG Arduino keyer open-source firmware.
  [ Hits: 956 | Votes: 1 | Rating: 8 ]
• Arduino CQ Caller - Arduino automatic CW Keyer for amateur radio
  [ Hits: 1466 | Votes: 2 | Rating: 4 ]

• CW Decoder with Arduino - If you want to build a cw decoder without using other active components than an atmel 328 - Arduino UNO , then this is sure something for you.
  [ Hits: 816 | Votes: 2 | Rating: 5.5 ]

• Sending and receiving Laser CW signals with a Raspberry Pi - Sending and receiving text with Morse code light pulses across the room is a fun and cheap project you can do on a Raspberry Pi or Arduino or any other microcontroller. This post explains how I did it, and how you can do it too.
  [ Hits: 291 | Votes: 0 | Rating: 0 ]

Pages: 1 2 [next]