arduino uno

The DXZone.com

arduino uno

16 links

Antennas : Magnetic Loop

  • Magnetic Loop Controller for 4 Antennas - This project is for those ham amateurs who do not have a commercial one . It's easy to build with a soldering iron, a plastic case and a little knowledge of arduino. The controller is made with budget components you can find easily in Internet. The main component is a cnc shield that fits over an Arduino Uno. Both made a compact, small and cheap controller.
    [ Hits: 131 | Votes: 2 | Rating: 10 ]
Operating Modes : Remote Operations
  • Remote CW Key Project - A simple DIY project for a remote cw key connected to your Flex Rig (actually it can be any other rig). On the remote side it uses and Arduino Uno board and a cheap HanRun Enc28J60 ethernet shield. On the local side it uses a key (better a keyer) connected to a serial port of your pc
    [ Hits: 121 | Votes: 0 | Rating: 0 ]
Technical Reference : Arduino
  • SWR / Wattmeter with Arduino Uno Shield - SWR / Wattmeter with Arduino Uno Shield. It can measure from 2 to 200 watt and SWR for HF Ham radio.
    [ Hits: 8890 | Votes: 38 | Rating: 5.77 ]
  • DDS VFO using Arduino - A DDS VFO using the Arduino Uno platform
    [ Hits: 3732 | Votes: 5 | Rating: 7.4 ]
  • Arduino miniVNA Control - A controller for the miniVNA using an Arduino UNO and touch screen color graphic LCD display
    [ Hits: 1440 | Votes: 1 | Rating: 1 ]
  • CW Decoder With Arduino Uno - Easy to build CW decoder based on DSP Goertzel code. If you want to build a cw decoder without using other active components than an atmel 328, Arduino UNO, then this is sure something for you.
    [ Hits: 701 | Votes: 4 | Rating: 8.75 ]
  • Arduino Antenna Switch - A homemade remote antenna switch made with an Arduino Uno by KK7S
    [ Hits: 2312 | Votes: 0 | Rating: 0 ]
  • Arduino MFJ tuner control - An Arduino uno based project to control an MFJ 998 antenna tuner via Icom CI-V interface by VE1ZAC
    [ Hits: 822 | Votes: 0 | Rating: 0 ]
  • RTTY Modem for Arduino - A project for a simple RTTY decoder based on Arduino UNO R3. Includes the RTTY modem source code available for download along to schematics pictures and references.
    [ Hits: 1372 | Votes: 6 | Rating: 6.83 ]
  • Colour TFT display with Touch controlled VFO BFO - Arduino uno universal VFO/BFO with Si5351 and TFT touch screen for BITX like txcvr
    [ Hits: 1707 | Votes: 4 | Rating: 9.75 ]
  • The WB0RIO 28 Mhz Arduino Beacon - This project involves the construction of a 5 Watt Morse code beacon transmitter that operates in the 28.200 to 28.300 section of the 10 Meter Amateur Radio band. The beacon controller uses an Arduino Uno microprocessor board to produce the three signals that control the transmitter.
    [ Hits: 622 | Votes: 0 | Rating: 0 ]
  • SimpleSat Rotor Controller - his controller uses the Yaesu GS-232 command set to control a Yaesu G-5500 Az-El rotor. The controller was designed to be compatible with the SatPC32 tracking program and should work with any tracking program that supports the Yaesu GS-232 format. This controller has been tested with the Arduino UNO and the Arduino Mega2560.
    [ Hits: 239 | Votes: 3 | Rating: 7.33 ]
Technical Reference : Arduino : Morse Code
  • A Remote Morse Key - A simple DIY project to have a remote cw key connected to your Rig. On the remote side it uses and Arduino Uno board and a cheap HanRun Enc28J60 ethernet shield. On the local side it uses a Morse Key connected to a serial port.
    [ Hits: 438 | Votes: 1 | Rating: 1 ]
  • OZ1EDR Arduino CW Decoder - PCB samples and Arduino cw program by Danish Clubstation Hilleroed
    [ Hits: 463 | Votes: 0 | Rating: 0 ]
Technical Reference : Morse Code Decoder
  • CW Decoder with Arduino - If you want to build a cw decoder without using other active components than an atmel 328 - Arduino UNO , then this is sure something for you.
    [ Hits: 815 | Votes: 2 | Rating: 5.5 ]
Technical Reference : Repeater
  • Arduino Repeater Controller - This blog article introduces an updated repeater controller project utilizing the Arduino UNO. It includes a CW identifier, and the ID message can be customized using hex codes. The author offers a Windows command line program for easier message coding and provides a link for download. The controller features three adjustable timers for IDer, Timer-out, and Squelch-tail. The article also mentions the use of an audio switch to control audio levels between the receiver and transmitter. Detailed instructions and code files are available on the author's website for both version 1 and version 2 of the Arduino repeater controller. The project aims to enhance repeater functionality and audio management in ham radio operations.
    [ Hits: 82 | Votes: 0 | Rating: 0 ]

Not satisfied ? Lookup Google Custom Search Engine for arduino uno


Search arduino uno with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search