base antenna

The DXZone.com

base antenna

252 links

Antennas : 160M
  • K6MM 160m Antenna - A vertical antenna for 160 meters band based on the K6MM vertical with some enhancements and modifications on the main capacitance hat
    [ Hits: 201 | Votes: 0 | Rating: 0 ]
Antennas : 40M : 40 meter Delta Loop Antennas
  • Delta Loop for 40 and 20 meter Band by UR0GT - This wire antenna for 40 and 20 meter band feature a good SWR. Horizontal side of the antenna is placed at two meters above the ground. Impedance of the antenna are depending by the height of the base from the ground and conditions of the ground
    [ Hits: 533 | Votes: 5 | Rating: 7.8 ]
Antennas : 40M : 40 meter Vertical Antennas
  • A very efficient half size 40 meter Vertical Antenna - A vertical antenna project for the 7MHz made with some spare parts. Based on a broken 20 foot fishing pole, it is based on a good ground system made with radials and a capacitive hat done to increase the global radiation resistance of the antenna. A custom loading coil is also included in this project to perfectly tune the antenna to the CW portion of the 40 meters band.
    [ Hits: 735 | Votes: 4 | Rating: 8.5 ]
Antennas : 6M
  • Omni-directional Antenna for 50 MHz - This simple project, based on the orginal CobWebb-Antenna model, is about an horizontally polarized, omi-directional antenna for the six meter band.
    [ Hits: 542 | Votes: 2 | Rating: 7 ]
Antennas : 6M : 6 meter J-Pole Antenna
  • Simple 50MHz J-Pole Antenna EA7AHG - Based on the popular DK7ZB simple 50 MHz Jpole antenna, this customized jpole project has been analized with MMANA-GAL and reproduced for six meters, two meters and 70 cm bands.
    [ Hits: 278 | Votes: 1 | Rating: 4 ]
Antennas : 6M : 6 meter Moxon Antennas
  • Building the 6 Meter Moxon Antenna - A moxon antenna for the 50 MHz build with 19 feet of 14 AWG copper wire, and based on a set of PVC pipes. This is an easy to build project that will give you an efficient directional antenna on 6 meters band with low SWR on more than 1 MHz bandwidth.
    [ Hits: 505 | Votes: 4 | Rating: 7.75 ]
Antennas : 6M : 6 meter Yagi Antennas
  • 6 Elements Yagi Antenna on 50 MHz - This is a design based on the QuickYagi 4 software by WA7RAI with some changes for practical reasons. The beam uses 6.5 metres of standard 25mm square boom, 12mm diameter elements without tapers. The actual boom length used is 6.3 metres and all parts are readily available.
    [ Hits: 131 | Votes: 2 | Rating: 6 ]
Antennas : Dipole
  • Short Monoband Dipole Antennas - KGD Antennas - The KGD antenna is an option for those with space restrictions. The idea behing this project is to provide a short dipole antenna for HF Bands and to allow operations on HF bands when its not possible to setup large antennas, using these short base loaded dipoles.
    [ Hits: 240 | Votes: 0 | Rating: 0 ]
Antennas : End-Fed : End Fed Half Wave Antenna
  • End Fed Half Wave Antenna Coupler - A home made end-fed half-wave antenna coupler with antenna lenght calculator and counterpoise calculator based on center frequency. Includes pictures and drawings along to antenna homebrewing instructions with a home made on air wound transformer
    [ Hits: 282 | Votes: 0 | Rating: 0 ]
Antennas : Receiving
  • 160 Meters 4 Square Receive Antenna - A four square array receiving antena for the top band, performance is extremely directional and space requirements are really hard to fulfill.
    [ Hits: 179 | Votes: 1 | Rating: 10 ]
Antennas : Towers
  • How setup the antenna tower - A multiple page article about assembling the antenna system, this section includes informations on constructing of the concrete tower base, starting from setting up correctly the foundations in relation to the antenna height.
    [ Hits: 220 | Votes: 1 | Rating: 8 ]
  • Antenna Mast Guying for Amateur Radio Antennas - Article based on ROHN engineering specification that will guide on proper guying heights and guy lengths when guying ham radio antenna masts. It will help you determine ahead of time the proper length of guy wires and the distance from the base of the mast to the anchor points
    [ Hits: 314 | Votes: 3 | Rating: 7.67 ]
Manufacturers : QRP Kits
  • Aerial 51 - Aerial 51 is an antenna manufacturer producing HF Wire antennas. Their antenna product catalog includes portable, OCF wire antennas for HF bands but also QRP transceivers, and accessories for portable operations.Based in Germany
    [ Hits: 422 | Votes: 0 | Rating: 0 ]
Shopping and Services : Accessories
  • Ham Goodies - Amateur Radio goodies for not only the Shack, but also a range of outdoor/portable kit. Ferrite toroids, RTL SDR, Un-uns and Baluns for antennas and RF Filters. Based in the UK.
    [ Hits: 144 | Votes: 0 | Rating: 0 ]
Shopping and Services : Antenna Parts
  • Antena KIT - Online shop for amateur radio antenna parts, accessories, holders, clips and insulators for home made antennas. Antena Kit delivers also ham radio transceiver mounts, cables, antenna rotors and other accessories. Based in Brazil
    [ Hits: 317 | Votes: 0 | Rating: 0 ]
  • Aerial-Parts of Colchester - Online antenna parts store, providing many accessories for amateur radio antenna homebrewing. Boom joiners, aluminium parts, elements clamps, filters, ferrites, fasteners, plasti caps, dipole elements. Based in UL
    [ Hits: 153 | Votes: 0 | Rating: 0 ]
Shopping and Services : Regional : Europe : Germany
  • UKW-Berichte Telecommunications - On-line shop for coax cables, RF connectors, Lightning protectors, Create antenna rotators, antenna masts and mounts, amateur antennas by FlexaYagi, Tonna F9FT, ANjo-Antennen and M2 Antennas based in Eggolsheim Germany
    [ Hits: 268 | Votes: 0 | Rating: 0 ]
  • Daki Funkversand - Daki Funkversand is a German based web shop for Amateur- & CB-Radio equipment. Our shop includes products such as radios, antennas, equipment, PMR, LPD & Freenet.
    [ Hits: 328 | Votes: 1 | Rating: 10 ]
Technical Reference : Arduino
  • Arduino Antenna Tuner - Arduino-based Automatic Amateur Radio Antenna Tuner
    [ Hits: 298 | Votes: 3 | Rating: 9 ]
  • Automatic HF Antenna Tuner with Arduino - Make and automatic antenna tuner based on Arduino and using economic card. This ATU Project can be installed outdoors and controlled remotely by an rs485 link
    [ Hits: 563 | Votes: 3 | Rating: 9.67 ]

Not satisfied ? Lookup Google Custom Search Engine for base antenna


Search base antenna with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search