cat control software ft

The DXZone.com

cat control software ft

41 links

Internet and Radio : WebSDR
  • WebSDR on 20m, 40m and 80m  updated  pop - On this page you can listen to and control a short-wave receiver located at the amateur radio club ETGD at the University of Twente. In contrast to other web-controlled receivers, this receiver can be tuned by multiple users simultaneously, thanks to the use of Software-Defined Radio. Provided by PI4THT
    [ Hits: 45664 | Votes: 523 | Rating: 7.25 ]
Manufacturers : Interfaces
  • Xggcomms Icom Yaesu CAT Interfaces - Xggcomms specialise in producing cost effective, high quality CAT and Audio interfaces for Icom and Yaesu Amateur Radio Equipment. Our interfaces are fully compatible with a large range of CAT and Digital Mode control software.
    [ Hits: 324 | Votes: 0 | Rating: 0 ]
Manufacturers : Software Defined Radio
  • SDR4Space - Software Defined Radio for Space Applications produces ground stations for uplink and downlink, Rotator computer controller with USB and CANbus Interface, USB Converters
    [ Hits: 145 | Votes: 0 | Rating: 0 ]
Radio Equipment : HF Amplifiers : Alpha 87A
  • Alpha 87A Remote Control - The Alpha 87A can be controlled over the internet using a TCP connection with version 2 of this software. You need one instance of the application on your remote station and one as client on a local or your home computer.
    [ Hits: 328 | Votes: 1 | Rating: 10 ]
Radio Equipment : HF Transceivers : Icom IC-7300
  • IC7300BKT Icom IC-7300 CAT Control - Windows PC control program for the Icom IC-7300 transceiver. Power-on and Power-off by software BktNetInterface for JTDX and WSJT-X, audio recording, memory management, cw keyer management, Interface for other software
    [ Hits: 461 | Votes: 2 | Rating: 7 ]
Radio Equipment : HF Transceivers : Kenwood TS-590S
  • The Kenwood TS-590 Series Transceivers - A web page dedicated to the Kenwood TS-590S and TS-590SG transceivers with technical specifications, and ham radio software remote control connection configurations.
    [ Hits: 122 | Votes: 2 | Rating: 1 ]
Radio Equipment : HF Transceivers : Yaesu FT-1000MP
  • Yaesu FT-1000-D RS 232 CAT interface - Schematic diagram circuit to build a RS232 serial interface for the Yaesu FT 1000D, works also as CW Keyer control with Log-EQF software. May be used with other Yaesu HF Transceivers.
    [ Hits: 218 | Votes: 1 | Rating: 1 ]
Radio Equipment : HF Transceivers : Yaesu FT-857
  • Yaesu FT-857 CAT Controller - Free windows basic and simple CAT program specifically for the Yaesu FT-857 radio. It provides an unlimited memory storage area which resides on the client side.
    [ Hits: 2364 | Votes: 8 | Rating: 8 ]
Radio Equipment : HF Transceivers : Yaesu FT-920
  • FT-920 CAT Controller Software - This computer control program is specifically designed for the Yaesu FT-920 transceiver. Freeware windows application.
    [ Hits: 1404 | Votes: 3 | Rating: 7.67 ]
Shopping and Services : Kits and Components
  • MiniDSP - MiniDSP is a platform for digital audio signal processing applications. Manufacture low cost digital signal processor kits for the DIY/OEM market. Our flexible audio platforms are software controlled and easily upgradeable.
    [ Hits: 618 | Votes: 2 | Rating: 6 ]
Software : Audio Streaming
  • RemAud Remote Audio Software - RemAud is a Voice over IP (VoIP) application primarily designed for two-way amateur radio remote control over the Internet. RemAud uses streaming-audio technology in a client-server architecture. It features high radio sound quality, low latency, low bandwidth and very low CPU usage by DF3CB
    [ Hits: 2406 | Votes: 13 | Rating: 7.85 ]
Software : Logging
  • Emergency Net Log - The ARES Emergency Net Log application is specifically designed for use by ARES Net Control Stations.
    [ Hits: 226 | Votes: 0 | Rating: 0 ]
Software : Macintosh
  • xCAT xDAX for macOSX and FlexRadio 6000 - xCAT is an helper application for the FlexRadio 6000 series running on macOS computers to control via CAT protocol tranceivers, while xDAX purpose is to provide a way for Digital Mode Software like Fldigi, WSJT-X to access the digital audio data (DAX) of the FlexRadioTM
    [ Hits: 194 | Votes: 0 | Rating: 0 ]
Software : Radio Control
  • GBCAT - GBCAT is free PC software for controlling amateur radio devices through a COM/USB port or through a TCP/IP network, with the ability to transfer a 2-way audio signal over a TCP/IP network supporting Yaesu FT-857 FT-817 FT-897, Icom IC-706MKIIG, Kenwood TS-2000 and TS-590S by 9A2GB.
    [ Hits: 2526 | Votes: 44 | Rating: 9.14 ]
  • IC7100BKT IC-7100 CAT Control Software - IC7100BKT is a free program to control the Icom IC-7100 transceiver for MS Windows, available in free version with limited functions and full donationware version.
    [ Hits: 1272 | Votes: 0 | Rating: 0 ]
  • R-20 Signal Capture and Analysis - This windows software includes an easy to read display with features designed to give you accurate and enhanced control of your ICOM IC-R20 Communication Receiver. Commercial 35 USD.
    [ Hits: 591 | Votes: 2 | Rating: 1 ]
  • JaRec - Java Radio Remote Control Software - JaRec is a multi-platform Java application which can be used to control your own CAT enabled transceiver (with support for audio) using a Serial/USB Serial/Bluetooth or network connection. jAReC can act as both a server and as a client. The PocketRxTx Android application can be used as a client securely to connect over the network and control (CAT) your radio transceiver remotely via jAReC server over the Internet or local LAN, with bi-directional audio support.
    [ Hits: 1734 | Votes: 12 | Rating: 7.31 ]
  • Hambook for Windows - Hambook is a modern general-purpose CAT-control software package for HAM radios targeting the Windows platform.
    [ Hits: 143 | Votes: 0 | Rating: 0 ]
Software : Software Defined Radio
  • Studio1 - Studio 1 is a Paid windows SDR software defined radio application, supports Tmate and Tmate2 USB control consoles, for better tuning and control.
    [ Hits: 639 | Votes: 5 | Rating: 3 ]
Technical Reference : Arduino
  • Automatic antenna switch with Arduino Nano - Arduino Nano board based antenna coax antenna switch intended for use with ICOM CI-V protocol. When is used alone with transceiver without PC control (CAT software, any logging software with CAT functionality), the CI-V transceive option in TRX setup shall be set to ON.
    [ Hits: 141 | Votes: 1 | Rating: 9 ]

Not satisfied ? Lookup Google Custom Search Engine for cat control software ft


Search cat control software ft with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search