coax dipole

53 links

28 MHz Antenna Project - 10m Flowerpot Antenna, monoband half-wave vertical coaxial dipole antenna for 28 Mhz.
[ Hits: 230 | Votes: 3 | Rating: 9.67 ]

Coax Dipole for 2 meters band - A homebrew 2m 144.2 MHz vertical 1/2 wave Coaxial Dipole antenna project for your home QTH, SOTA, portable field operations/WICEN exercises or the emergency 2m Go-box. Elsewhere in amateur radio circles this antenna is known as a 2m Flower Pot Antenna
[ Hits: 250 | Votes: 3 | Rating: 6 ]
Portable Coaxial Dipole Flower Pot Antenna - A homebrew 2m 144.2 MHz vertical 1/2 wave Coaxial Dipole antenna project for your home QTH, SOTA, portable field operations/WICEN exercises or the emergency 2m Go-box. Elsewhere in amateur radio circles this antenna is known as a 2m Flower Pot Antenna
[ Hits: 105 | Votes: 1 | Rating: 8 ]

VDA Antenna for 30m ^new - This project documents the construction and enhancement of a 30m Vertical Dipole Array (VDA) antenna inspired by Remco 7QNL article. Initial design utilized an 18m Spiderbeam pole and a 4m boom. Improvements included a lighter boom structure using fishing rods and a revised coaxial arrangement for enhanced mechanical stability.
[ Hits: 38 | Votes: 0 | Rating: 0 ]

40m loaded dipole - This is an short dipole for 7 MHz. Total length of this dipole is just 10 meters, 33 feet. Missing lenght is balanced by a coil made of 49 turns of a 40mm diameter pvc pipe. The use of a choke balun is recommended, as always, to adapt the unbalanced coax cable to the balanced antenna, and to prevent RF feed back along the coax shield.
[ Hits: 194 | Votes: 4 | Rating: 8.75 ]
40-80 Coax Trap Dipole - Full article on how to build a home-made wire dipole antenna for 40 and 80 meters band. Article is fully in italian, as it was published on ARI RadioRivista, but is plenty of self explaining pictures that will guide you on homebrewing this trapped dipole antenna for the lower amateur radio bands.
[ Hits: 265 | Votes: 3 | Rating: 9.33 ]

6 metre SOTA Antenna - A simple and light vertical coaxial dipole for 50-52 MHz band, designed for portable SOTA operations based and inspired by the VK2ZOI flower pot antenna
[ Hits: 165 | Votes: 0 | Rating: 0 ]

Build your own HF balun - A balun is a MUST for dipoles or similar antennas when they are feed with coaxial cable. From the RF point of view, the shield can be modeled as two conductors, the internal shield (the real shield, this is, ground) and the external shield, who is really far to be ground. In this way, your dipole has 3 arms, the two from the dipole and the coaxial cable shield (external face)
[ Hits: 248 | Votes: 1 | Rating: 10 ]

Reverse Engineering the Coax Dipole Antenna - Study of the Coaxial Dipole: Just how does this thing work.
[ Hits: 649 | Votes: 1 | Rating: 1 ]
Coaxial Dipole Antenna - A distributed capacity coaxial dipole antenna. The antenna is very broadbanded with a very flat swr on all band when setup of the antenna is done at the proper lenght and height.
[ Hits: 543 | Votes: 0 | Rating: 0 ]
Build a Simple VHF Dipole Antenna for 2 Meters: A Beginner's Guide - This article serves as a beginner-friendly guide to constructing a simple VHF dipole antenna for 2 meters, perfect for novices in the hobby. With an emphasis on affordability and simplicity, it explains the basics without overwhelming technical details. Recommendations for coaxial cable and mounting methods are provided, offering practical solutions for effective communication. By following these instructions, novices can build a functional antenna without breaking the bank.
[ Hits: 113 | Votes: 1 | Rating: 7 ]

Multi-Band End-Fed Antenna Design for Limited Space ^new - This document details the construction of a multi-band end-fed antenna, suitable for situations with limited space for larger antennas. The design utilizes a 1:49 to 1:60 impedance transformer to match a half-wave wire antenna fed at one end. Compared to a traditional dipole, this antenna resembles a highly unbalanced Windom antenna with one very long leg and a virtual short leg. The design eliminates the need for radials but relies on the coax cable shield for grounding. The document recommends using at least 10 meters of coax and installing a common mode filter at the entry point to the shack for improved performance.
[ Hits: 76 | Votes: 0 | Rating: 0 ]

The Infamous Attic Dipole - An attic wire antenna with several modifications during the time. Began as a simple coax fed doublet antenna, and upgraded to a multi-band hf fan dipole, till the G5RV all deployed in an attic.
[ Hits: 102 | Votes: 0 | Rating: 0 ]