commands router

A simple Wi-Fi Yagi - Add two parasitic elements to the sleeve dipole of a Netgear Router

EU Sprint Contest - It's a nice DOS program to handle the EU Sprint Contest written by Peter, DL2NBU (tnx). Both the screen and most of the commands are very similar to CT by K1EA so the program will be real friendly. Use a standard CW interface (see below) to connect your computer to the radio and send CW from your keyboard. SPRINT runs on any IBM compatible computer (XT, AT) with MS-DOS 3.3 or higher, W95 and W98. The ZIP file includes an ASCII file in English written by the author with instructions.

Norwegian ham calls - On this page you can search our online database for Norwegian Ham's.

Clusters and Packet Radio - Introduction to the use of clusters and Packet Radio, hardware, settings and commands by ON4SKY

IC7000BKT Icom IC-7000 CAT Control - CAT Control specific for Icom IC-7000 allows managing filters and all the commands of the RTX. Includes a function to synchronize and manage all the memories of the IC-7000.

Kenwood TS-50 / 50S - DBS Speech processor for the Kenwood TS-50, COM Commands, Service menu, RF Gain and more mods

FT-857D Quick Reference - A quick reference table with all possible menu commands for the Yaesu FT-857D

TH-D7 commands - Commands are for the TH-D7(G) upgraded model.

Commands for TH-D7 - Kenwood TH-D7(G) and TH-D7A commands reference

Kenwood TH-G71 protocol - This PDF File include the serial commands to program and control the TH-G71. Should work with TH-D7 series too

M8000 Terminal Software - This software allows your PC to connect to the Universal Radio M-8000 Decoder through its serial port in order to get and save the decoded data but also to send commands to the decoder.

Grig Radio Control - Grig is a freeware simple Ham Radio control (CAT) program based on the Ham Radio Control Libraries (Hamlib). It is intended to be highly generic presenting the user to the same graphical user interface regardless of which radio is being controlled. Grig supports the most commonly used CAT commands that are implemented by Hamlib, and integrates well with other ham radio programs like Xlog and gMFSK. Grig has been developed on Linux, but has been ported on Mac and Windows OS.

LinPac packet radio terminal - Linpac is an extensible Linux packet terminal that supports easy access to concurrent connections (streams), PBBS/FBB forwarding, and support for adding external commands

MacTNC - MacTNC is simple, configurable terminal software used by amateur (ham) radio operators to control a TNC (terminal node controller). MacTNC performs most of the same functions of other terminal software, but includes buttons for standard commands, and allows the user to configure additional buttons for special purposes. MacTNC works only user Mac OS X because it relies on Unix components of the current operating system.

VT100/ANSI terminal and Telnet client - Online is a VT100/ANSI terminal emulator and Telnet client for Palm OS organizers. Connect to Unix systems, configure routers and reprogram embedded computers.

ptt2dtr - Translates CAT PTT commands into COM port DTR line changes. Use COM port PTT instead of CAT PTT control.

CI-V Test - CI-V Test for Win98 (others not tested, but should work) is a simple freeware program to display received CI-V messages in Hex and text, and send commands for test purposes to the rig. This program is not intended to convienently control your rig, just explore the functions of CI-V.

AVROT project - Rotator controller, azimuth & elevation control of rotators (automatic antenna turning) based on commands from computer. A project by Pavel VACHAL and OK1DX - KF9VM

RFI From Computer Networks - Is your router shutting you down ?

WiFi Router for amateur use - Modifying consumer off the shelf wireless LAN devices for specialized amateur use