construction

235 links - and 1 categories

Pages: [prev] 1 2 3 4 5 6 7 8 9 10 11 12

Antennas : 15M

Build a Lightweight 15m Yagi Antenna: Simple Design for Impressive Performance - In this article, Steve G0UIH presents a straightforward guide for constructing a lightweight 15m 3 Element Yagi antenna with impressive performance metrics. With a focus on ease of construction and efficiency, the design boasts a nearly 8.2dbi forward gain and 30db front to back ratio. Utilizing readily available materials and a hairpin match for impedance matching, this Yagi offers broad bandwidth and simple tuning for optimal operation across the 15m band.
[ Hits: 71 | Votes: 0 | Rating: 0 ]

Antennas : 30M

VDA Antenna for 30m ^new - This project documents the construction and enhancement of a 30m Vertical Dipole Array (VDA) antenna inspired by Remco 7QNL article. Initial design utilized an 18m Spiderbeam pole and a 4m boom. Improvements included a lighter boom structure using fishing rods and a revised coaxial arrangement for enhanced mechanical stability.
[ Hits: 38 | Votes: 0 | Rating: 0 ]

Antennas : Beverage

The Reversible BOGs - The author struggled with receiving antennas on his property. After a standard Beverage on Ground (BOG) antenna failed, he built a Reverse Beverage on Ground (RBOG) using telephone cable. He details construction and testing, finding the RBOG outperformed other antennas in noise level, signal strength, and reception pattern. Software modeling helped optimize the antenna length. Unfortunately, the project ended when telephone cable from the second RBOG was stolen.
[ Hits: 22 | Votes: 0 | Rating: 0 ]
Reversible RG6 Beverage Antenna - The author describes building a reversible Beverage antenna for low-band receive applications. He details the construction process, challenges faced, and initial performance testing. The antenna uses coaxial cable and transformers for switching direction. Overall, the author is pleased with the results and plans to build additional reversible Beverages.
[ Hits: 21 | Votes: 0 | Rating: 0 ]

Antennas : End-Fed

Multi-Band End-Fed Antenna Design for Limited Space ^new - This document details the construction of a multi-band end-fed antenna, suitable for situations with limited space for larger antennas. The design utilizes a 1:49 to 1:60 impedance transformer to match a half-wave wire antenna fed at one end. Compared to a traditional dipole, this antenna resembles a highly unbalanced Windom antenna with one very long leg and a virtual short leg. The design eliminates the need for radials but relies on the coax cable shield for grounding. The document recommends using at least 10 meters of coax and installing a common mode filter at the entry point to the shack for improved performance.
[ Hits: 76 | Votes: 0 | Rating: 0 ]

Antennas : Magnetic Loop

Magnetic Loop Antenna Builds and Autotuning Advancements - Explore two magnetic loop antenna constructions, utilizing a 6-foot and a 12-foot square loop. Accompanied by a detailed description, the 6-foot loop features a built-in stepper motor control circuit, while the 12-foot loop incorporates a separate loop controller. Efficiency, tuning ranges, and the innovative autotuning solution using a microcontroller are discussed, offering insights into overcoming the antenna's narrowband limitations.
[ Hits: 67 | Votes: 0 | Rating: 0 ]

Antennas : Moxon

Moxon Mania - Building the Ultimate 4-Band Moxon Antenna - The article details the design and construction of a four-band Moxon beam by a radio amateur. The beam, mounted atop a rooftop tower, aimed for gain over a dipole on 20 meters, cost under $500, and included additional bands. The design features fiberglass spreaders, four bands (20/15/10/6 meters), and a single feedpoint. The construction involved computer modeling, NEC source code, and specific dimensions. The article outlines the assembly, materials, and tuning process, including in-situ adjustments for optimal performance. Despite initial challenges, the beam improved signal strength and facilitated contacts on multiple bands, marking it as the best HF antenna the author has owned.
[ Hits: 96 | Votes: 0 | Rating: 0 ]

Antennas : Portable

Portable Half-Square Antenna: - The author explores a portable version of the half-square antenna, typically a single-band structure. Using a 9:1 unun for versatility, they describe construction with speaker wire, deployment using collapsible poles, and field tests, achieving successful contacts on multiple bands. The article suggests efficient matching methods and concludes with the antenna's integration into the author's portable options.
[ Hits: 126 | Votes: 0 | Rating: 0 ]
Vertical Dipole Array for 20-17-15 Meters ^new - This article explores the evolution of antenna choices for DXpeditions, focusing on the shift from mono-band VDAs to a multi-band solution. It details the design and construction of a lightweight, versatile 20-17-15m VDA, utilizing readily available materials like fishing rods and IKEA breadboards. The author discusses challenges, adjustments, and offers guidance for replication.
[ Hits: 67 | Votes: 0 | Rating: 0 ]

Antennas : Quad

Efficient 2-Element Quad Antenna for 2m - A detailed guide presents a simple 2-element quad antenna for 2m, offering ease of construction, portability, and efficient performance across the 144-148 MHz band. The design allows quick disassembly for storage and features adjustable polarization, making it ideal for various applications, including transmitter hunting and SSB operations.
[ Hits: 62 | Votes: 0 | Rating: 0 ]

Operating Modes : Satellites : CubeSats

FunCube Dongle HF Upconverter: Expanding Reception Range - This article describes an HF upconverter for the FunCube Dongle Pro. Designed for radio amateurs, the converter extends reception capabilities to lower frequencies (0 Hz to 30 MHz) by mixing them with a higher oscillator frequency (100 MHz). This translates the desired signal into a range detectable by the FunCube Dongle (64 to 1,700 MHz). Key components include a double-balanced mixer and a low-pass filter to suppress unwanted signals. The project provides schematics, filter specifications, and design considerations for construction.
[ Hits: 34 | Votes: 1 | Rating: 8 ]

Radio Equipment : HF Transceivers : Icom IC-705

Creating a Custom IC-705 Paddle Mount - This article describes a DIY paddle mount for the Icom IC-705 radio. Dissatisfied with the high cost of commercial options, the author builds a mount from sheet metal and scrap materials. Construction utilizes hand tools and readily available supplies. The final design offers adjustable paddle placement and tool-free installation/removal. Initial testing shows promise for improved field operation.
[ Hits: 28 | Votes: 0 | Rating: 0 ]

Technical Reference : Amplifiers : HF Amplifiers

Building a Robust PL519 Tube HF Amplifier - his article explores the construction of a PL519 tube amplifier, utilizing Ulrich L. Rohde N1UL's insights. Focusing on a modest 25W continuous output, the design ensures robustness with forced air cooling. The detailed breakdown covers input matching, screen grid voltage generation, bias adjustment, anode power supply, heater power supply, and monitoring circuitry, providing valuable guidance for ham radio enthusiasts.
[ Hits: 71 | Votes: 0 | Rating: 0 ]

Technical Reference : Arduino

Arduino Digital Transceiver Project - Arduino Digital Transceiver (ADX) is a low-cost HF transceiver for digital modes. This Arduino-based project, inspired by QDX, features four bands, including 80m and 20m, supporting FT8, FT4, JS8call, and WSPR. Designed for simplicity and affordability, it uses an Arduino Nano, SI5351 module, and CD2003GP receiver. The ADX project emphasizes easy procurement, construction, setup, and operation, making it an accessible option for QRP enthusiasts. The firmware update enhances functionality, including CAT control support.
[ Hits: 96 | Votes: 0 | Rating: 0 ]

Technical Reference : Mic wiring

Adapting Standard Headset Mic for Yaesu FT-8900 - Explore the process of creating a custom adapter for the Yaesu FT-8900 radio with a non-standard mic port. The article guides users through understanding the reversed pin-out of the RJ-12 connector on the 8900, providing a detailed circuit for adapting the voltage for electret-based mics. With a list of required parts and construction tips, this DIY project ensures seamless compatibility with standard electric headset mics.
[ Hits: 45 | Votes: 1 | Rating: 1 ]