d terminal

d terminal

Pages: 1 2 [next]

• Low reactance multiband center feed wires - An antenna system is more easily interfaced to a radio when the input reactance at the feedline terminals is low or close to series resonance
  [ Hits: 2995 | Votes: 5 | Rating: 8.8 ]

• CES Wireless Technologies - CES Wireless Technologies manufacturer of Mobile information Systems including Dispatch and Mapping Software, GPS, AVL, Mobile Data Display Terminals, ANI, CTCSS, and Microphones
  [ Hits: 606 | Votes: 2 | Rating: 5.5 ]

• Global Connections Plus - RF Connectors, audio connectors, terminals, cable ties
  [ Hits: 652 | Votes: 1 | Rating: 10 ]

• TNC-X - TNC-X - The Expandable TNC A new Terminal Node Controller (kit) design based on the Chepponis/Karn KISS protocol. It is implemented using a Microchip PIC 16F628A microcontroller, a CML MX614 Bell 202 modem chip, an 8K Ramtron FRAM
  [ Hits: 4277 | Votes: 5 | Rating: 8 ]

• GAO Engineering - Gao engineering offers a wide range of affordable, popular and reliable rfid products, dsp, arm and other microprocessor evm and development boards, ides, universal programmers, emulators, dsp learning systems, micro-network terminals, test and measurement products for engineers.
  [ Hits: 658 | Votes: 1 | Rating: 1 ]

• Sound Card Packet - This amateur radio web site explains how to use the AGWPE utility program to send and receive packet (a digital data mode) using the sound card of your PC instead of a traditional TNC (Terminal Node Controller), a radio modem.
  [ Hits: 1170 | Votes: 2 | Rating: 5.5 ]

• UI-VIEW  ^pop - UI-View is an APRS client that runs on Windows. This application differs from most APRS software in that it isn't designed just to be used with TNCs in terminal mode. UI-View also supports TNCs in KISS mode, AGWPE host mode and BPQ host mode. The 32 bit version of UI-View also supports WA8DED/TF host mode, and the variant of it used in the SCS PTC-II and PTC-IIe.
  [ Hits: 31709 | Votes: 56 | Rating: 7.26 ]

• OH2GI Ham System - All-mode contesting and logging software system designed primarily for on-line operation of HF digital and CW radio stations through Terminal Node Controllers (TNC)
  [ Hits: 1582 | Votes: 3 | Rating: 9.33 ]

• MT63 Terminal - MT63 soundcard program for Windows by IZ8BLY
  [ Hits: 2702 | Votes: 3 | Rating: 8 ]

• VT100/ANSI terminal and Telnet client - Online is a VT100/ANSI terminal emulator and Telnet client for Palm OS organizers. Connect to Unix systems, configure routers and reprogram embedded computers.
  [ Hits: 1083 | Votes: 4 | Rating: 4.25 ]

• DF9CY Project Auriga - PA is a JAVA software package containing several programs, SW/VHF/UHF Logbook (imports format from RADIOMAN, VMT), Log conversion to HTML format, Import and export functions for RADIOMAN, CT RES files, BV QSL Labels, CSV etc. Internet DX-Cluster support, Keeps track of your worked Callsigns, Checks your worked Grid Squares per band, Databases for worked Grids and Callsigns Uses K1EA CQWW.CTY country file, Easy command line version for terminal operation Moontracking as clock, Pathloss calculation
  [ Hits: 1871 | Votes: 0 | Rating: 0 ]

• Turbolog - TurboLog is a station management and logging program for the discerning radio amateur / hamradio operator. Besides powerful database and logging functions there is a fully integrated support for the control of typical radio station equipment, e.g. Transceivers, Packet radio, Morse and voice keyer, Digital modes terminal, Antenna switching, Acoustic alerting, and more. Trial version available
  [ Hits: 1311 | Votes: 2 | Rating: 4 ]

• WinGT and WinBox - Packet radio terminal program for win 3.1 and above, WinBox is a modified version of WinGT for cb radio usuage
  [ Hits: 2535 | Votes: 15 | Rating: 5.07 ]
• MUBAY - The multiuser/multitasking BayCom Packet Terminal Driver program is a general purpose communications package for communicating with a BayCom modem attached to your IBM-PC/clone in conjunction with the TFPCX Baycom driver software. The software will also work with a normal TNC if it supports KISS mode, such as the Kantronics range.
  [ Hits: 1480 | Votes: 1 | Rating: 9 ]
• SV2AGW AGWTerm Packet Terminal - This program needs no other explanations because it is just a terminal program. The only difference is that it is multitasking. This means that you can have multiple connects and you can YAPP without restrictions. You can receive as many YAPPs as you wish simultaneously. If you have more than a RadioPort (You have more than a TNC) you can connect in any RadioPort. You can have also unlimited number of connections (about 100).
  [ Hits: 3132 | Votes: 4 | Rating: 4 ]
• MUTNC - The multiuser/multitasking BPQ Packet Terminal Driver program is a general purpose communications package for communicating with a packet TNC or Baycom modem attached to your IBM-PC/clone in conjunction with the BPQ Node software.
  [ Hits: 1255 | Votes: 0 | Rating: 0 ]
• Packet Terminal Interface - Simple Windows based TNC interface program Designed for ARES operation, simple operator interface to connect and perform communication functions, control operator programs screens before operations Both receive and transmit screens Simple Windows based TNC interface program Designed for ARES operation Simple operator interface to connect and perform communication functions Control operator programs screens before operations Both receive and transmit screens
  [ Hits: 12013 | Votes: 24 | Rating: 4.08 ]

• RTTY by WF1B - RTTY by WF1B combines features of a terminal program with the features of a contest logging program, support AEA PK-900,MFJ-1278, AMT-1, HAM PCI4000/4100/3000 and many more
  [ Hits: 7116 | Votes: 28 | Rating: 5.85 ]
• Zakanaka - A digital mode decoding and terminal program that uses no terminal unit, terminal node controller, or multimode hardware. It does all its decoding using the sound card inside the computer, and it can interface with a radio using a COM port. Zakanaka is an extremely cost-effective way of operating PSK31 and RTTY
  [ Hits: 22768 | Votes: 44 | Rating: 6.93 ]
• gMFSK - Linux free multimode HF terminal program. Despite the name, gMFSK can send and receive many digital conversational modes typically used by radio amateurs on HF. Supported modes are: MFSK (MFSK16 and MFSK8) RTTY THROB (1, 2 and 4 throbs/sec) PSK31 (BPSK and QPSK) PSK63 MT63 Feldhell
  [ Hits: 4399 | Votes: 5 | Rating: 9 ]

Pages: 1 2 [next]