dipole 2m

W3FF Portable Dipole  ^pop - This is the antenna w3ff designed for his walking portable station. It is a dipole constructed out of the plastic plumbing pipe CPVC. There are telescoping whips at the ends of each side of the dipole, and these whips are adjusted to bring the antenna into resonance on each of five HF Bands 10, 12, 15, 17, and 20 Meters

Stacked 7-Element-2m-Yagis - These yagis and groups were designed with YO7.23 from K6STI and checked with EZNEC from W7EL. With a gain of 14/17/20dBd they have a good relation between gain and mechanical problems.

13 elements Yagi antenna for 144 MHz - DJ9BV yagi antenna for 2 meters band

2 meter slim jim copper tubing antenna - 2 meters copper tube antenna, tested with an Icom IC-V8000

PA0NHC 80/40mtrs dipole antenna - Dipole antenna for 80 to 20 mtrs with END-coax feed by PA0NHC

300 ohm twinlead 40 meter dipole - The N2CKH travel special 300 Ohm ladder line convertable antenna

The Double Bazooka Antenna - The Double Bazooka Dipole is a very efficient single band antenna which is very quite, and does not require the use of a balun. This antenna consists of coax (RG58) or other 50 ohm type with the shield split at the center and the feedline attached to the open ends

M3FVB VHF 8db collinear  ^{updated  pop} - Build a 2m 8db collinear for portable use

End-Fed Halfwave Antenna  ^pop - The end-fed halfwave antenna is a resonant half wavelength long antenna like a dipole antenna except for it is fed at its end rather then in the center. This antenna is as old as radio and is probably best known as the Zepp Antenna

Wireman-J-Poles for 2m-40m  ^{updated  pop} - J-Poles with Wireman-cables for the quarterwave matching section

The 5 Bands Wire-Beam - This wire-beam has one radiator-element, feeded with 450-Ohm-Wireman-twinlead and needs an antenna-tuner. For the bands 6m, 10m, 12m, 15m, 17m and 20m bended reflector-elements are used. The support is a cross of 4 fibreglass-fishing-rods

Modified Buddipole for 40 to 10 Meters - This is modified version of buddipole antenna, using vertical wires instead of telescopic ends by ks7j

Slinky antennas - Slinky Antenna Basics, clandestine dipole

Antennas basics  ^pop - An antenna study guide by NZART, cover basic topics like dipoles, wave lenght calculation, baluns, beams, dummy loads, and measurements.

T-Match Construction - The T-Match with its balanced feed point is one method of feeding a Balanced Dipole.

Vertical antenna for 2 mt and 70cm  ^pop - How to Build a Dual-Band Antenna for 2M/70cm

Field-Deployable Antennas - Resonant dipoles, the W3EDP and end-fed wires, the extended double zepp, non-resonant doublets, and the "Zip-Cord Special" , the W6MMA vertical.

NJDXA DX Tips - Calendar, dx events and hot DX Tips, managed by Bill Hellman, NA2M

The Islandhoppersclub - IOTA from Island

KVK Antenna Systems - The manufacturer of the NuBeam, Vipole, and the multi-band Quad-Folded-Dipole (or QFD for short) antenna. Also have a unique multiband vertical which can combine operation on multiple HF frequencies as well as provide high gain on 50, 144 and 438MHz in a single antenna.

VectorFox - VectorFox is a software born to incorporate a PC into the fox hunting environment. VectorFox is able to take inputs from up to 5 sources, such as a 2m beam, a 2m signal meter, a TDOA, etc, and display the results on the screen. VectorFox also accepts Agrelo inputs. From these results the operator can choose which indication is best and have a line drawn on the map in the direction of the signal.

Yaesu FT 857 specifications - Yaesu FT 857 technical details and pictures

KC7RYN IC-2100H Review - A brief review of the IC-2100 mobile 2m transceiver

Icom america - IC-V8000 page - IC-V8000 2M Mobile, power when you need it

IC-v8000 image - Large image by icom america