icom r1

2 Elements revesible verticals antennas - 2 element reversible verticals, small footprint, big results.

Random wire Unun - Get all band coverage with a single wire and the icom 703

Jpole for PMR-Radio - A 446 Mhz J-pole antenna

KR1ST Magnetic Loop Antenna - This receive only loop covers a frequency range of about 5 MHz to 22 MHz and is built from readily available parts.

A Stealthy HF Coat Hanger Antenna - A multiband stealth antenna. Tuner is required. The antenna is made from a $15, 500 ft roll of black #14 insulated stranded wire, about 120 small black wire ties, and maybe 30 or so large black wire ties.

13PR184 Michael - 13PR184 - Michael's Website

US Band Plan by ICOM - ICOM USA Amateur Radio HF VHF/UHF band plan updated to 2008, include a Common Country prefixes in PDF Format

the Quarter Century Wireless Association - Wild Rose Chapter 151 - Alberta

IARU Region 1 HAREC Question Pool - This IARU Region 1 webpage contains details of banks of questions to be used in examinations at the HAREC licence level.

Free Web Receivers from UK - Up to 3 free to tune receivers based in Bedfordshire England, Ten Tec RX320D, Yaesu FT-840 and Icom PCR-100

Grand Junction, CO Scanner - Grand Junction online police scanner denver colorado

US grid square map - A pdf file of US grid square map by Icom america

CQ Zones World Map  ^updated - A PDF file of CQ Zones made available by Icom America.

Aero Mobile Ham Radio - Aero mobile with the ICOM 706MKIIg By Chuck Forsberg WA7KGX

ICOM 746 Temperature Measurements - The ICOM 746-Pro has acquired a history of NEC 1678G (IC-151) MMIC and driver transistor 2SK2975 failures. The failure of IC-151 appears to be a combination of ESD damage from electrostatic charge on the antenna entering IC-151, and perhaps thermal heat.

Icom 821H vs Yaesu FT-847 - A thread about Icom 821H and Yaesu FT-847

Kenwood TH-F7E vs Icom IC-E90 - Comparing the TH-F7E with the Icom IC-E90

N1EQ Mike Nadeau Repair Service - Specialize in servicing modern HF/VHF/UHF multimode transceivers and receivers Icom, Kenwood, Yaesu, and a few others

AVVid - Quality repair of Kenwood and Some Icom equipment

ZLP Electronics - Yaesu Icom Kenwood CAT Interfaces. Isolated audio-DATA interfaces for ALL afsk DATA modes inc psk31 rtty sstv etc.

RUMtrol746PRO - This program is used for the ICOM IC-746PRO, IC-7400.You can edit all the setting and write it to file for later use. Runs on Windows Linux and MacOSx

RUMLog - RUMlog is a short-wave logging and QSL handling/printing tool for MacOSX RUMlog is available with an interface for transceiver control. Supporting Kenwood, Elecraft and ICOM. (IC-7400/IC746PRO, IC-7000 and IC-706)

RUMtrol7000 - Windows and MacOS programming software for the ICOM IC-7000

ICOM Rig Control - Freeware amateur radio transceiver control program tested with IC-756 Pro.

ICOM IC-E90 accessories - CI-V Interface and Power supply adapter for the IC-E90