icom ui 7

icom ui 7

Pages: [prev] 1 2

• ICOM Tuner Connector - Many Icom radios e.g.7100 have a connector for automatic tuners such as the Icom AH4. The cable supplied by Icom is of a fixed length 10m and is not shielded. Icom recommends to use shielded cable for any length greater than 10m.
  [ Hits: 232 | Votes: 1 | Rating: 10 ]

• ICOM IC756 Fan Modification - ICOM IC756 PRO II III, PS125 Fan Modifications, install an external cooling fan on the ICOM IC756 PROIII to minimize the heat on the chassis, then will perform a fan modification on the ICOM PS125 power supply to minimize the fan noise.
  [ Hits: 115 | Votes: 1 | Rating: 10 ]

• Creating a Custom IC-705 Paddle Mount - This article describes a DIY paddle mount for the Icom IC-705 radio. Dissatisfied with the high cost of commercial options, the author builds a mount from sheet metal and scrap materials. Construction utilizes hand tools and readily available supplies. The final design offers adjustable paddle placement and tool-free installation/removal. Initial testing shows promise for improved field operation.
  [ Hits: 28 | Votes: 0 | Rating: 0 ]

• Configure FLDigi on MacOSX to IC-7100 - Ho to properly configure the FLDigi software running on a MacOS to connect to the Icom IC-7100. Article includes snapshots of I/O ports configuration settings.
  [ Hits: 197 | Votes: 1 | Rating: 1 ]
• ICOM IC-7100 Review - An owners point of view about the ICOM IC-7100 HF, 6M, 4M, 2M & 70cm transceiver
  [ Hits: 68 | Votes: 1 | Rating: 10 ]

• Icom IC7300 Modifications by M0FOX - Icom IC 7300 noisy Fan replacements with a whisper quiet Noctua NF-A8 / PWM and installing and configuring WSJT-X with IC 7300 correctly
  [ Hits: 312 | Votes: 2 | Rating: 10 ]
• IC-7300 Quick Start Guide - PDF document for IC-7300 beginners. The ICOM IC-7300 is an HF + 6 meter, multi-mode, self-contained Software Defined Radio (SDR) transceiver with knobs, buttons and a touch screen. It also has a real-time spectrum display with pan adapter and water fall displays.
  [ Hits: 697 | Votes: 2 | Rating: 8 ]
• IC-7300 Bluetooth Support - It is possible to add a very small Bluetooth transmitter to the 3.5mm headphone jack and then use a pair of Bluetooth headphones around the shack. In this article Author provides some tips on choosing the proper Bluetooth interface.
  [ Hits: 286 | Votes: 4 | Rating: 7 ]

• ICOM IC-7610 Rewind - Without any doubt at all, the best radio I have owned is the ICOM IC-7610. But the grass is always greener and so even though I loved my IC-7610, I thought there might be something better out there. I purchased a YAESU FT-DX101D and really disliked it.
  [ Hits: 108 | Votes: 0 | Rating: 0 ]

• Everything you needed to know about Radio Receivers and Scanners - Tuning into the airwaves for new and interesting transmissions has fascinated enthusiasts since the very earliest days of radio. As a result of advances in computer and radio technology, the equipment packed radio rooms of the past are now replaced by scanning receivers sometimes just the size of a mobile phone. What can radio receivers/scanners pick up? What types of radio receivers/scanners are there? What can and cannot be monitored legally? Best practice when using a radio receiver/scanner
  [ Hits: 178 | Votes: 0 | Rating: 0 ]

• Icom IC-2720H VHF/UHF Transceiver Operating Guide - Mini-Operating Guide includes useful hints on Using the HM-133 Microphone, Basic Operation, Operating through a Repeater, Programming a Memory Channel and Assigning a Memory Channel to a Memory Bank
  [ Hits: 237 | Votes: 0 | Rating: 0 ]
• Icom IC-2720H One Page Operating Guide - An operating guide for the com IC-2720H VHF/UHF Radio, includes Turning the power On or Off, Selecting the Output Power, Activating Memory Mode, Operating in Memory Mode
  [ Hits: 409 | Votes: 0 | Rating: 0 ]

• VE2DX Electronics - Amateur radio accessories, like the CT-17B ICOM CI-V hubs, IABs ICOM ACC1 Breakout boxes, GS232Dunio GS232A/B arduino based rotor controler, IMK memory keypad for ICOM Radios
  [ Hits: 288 | Votes: 0 | Rating: 0 ]

• Win4IcomSuite ICOM Radio Control Software - The Ultimate Control Software for the IC-7300, IC-7610, IC-7600, IC-7850, IC-7851 and Others is a control software suite that includes additional interesting features such as support for the built in Spectrum Scope, Audio monitors, Shortwave DB, CW Terminal, Clublog Spotting, Memory management, interface to Ham Radio Deluxe Logbook, DM780, n1mm+, log4om, DXLab and other. Runs on Windows OS, commercial licence.
  [ Hits: 364 | Votes: 1 | Rating: 1 ]

• Automatic antenna switch with Arduino Nano - Arduino Nano board based antenna coax antenna switch intended for use with ICOM CI-V protocol. When is used alone with transceiver without PC control (CAT software, any logging software with CAT functionality), the CI-V transceive option in TRX setup shall be set to ON.
  [ Hits: 141 | Votes: 1 | Rating: 9 ]

• The iKeyPad for ICOM Radios - The Icom series of radios from the IC-746 Pro on to the latest 7800 radios have a 4 memory digital voice and CW keyer built into the radio. This external Keypad, based on the official Icom circuitry can considerably help you on using the voice and cw keyer
  [ Hits: 58 | Votes: 1 | Rating: 8 ]

• Connect you MacOS to CAT Serial Port - How to connect an Apple MacOS to a USB Radio transceiver. Get a Mac driver for ICOM IC-7100, IC-7200, IC-7300, IC-7600, IC-7610, IC-7850, IC-9100, PCR2500, Kenwood TS-890S, TS-990S, TS-590S, Elecraft KX3, K3S, Yaesu FTdx3000, FT-891, FT-991 or Ten-Tec Eagle USB direct connect built in USB/Serial adapter.
  [ Hits: 230 | Votes: 0 | Rating: 0 ]
• Miniature CI-V for Icom Radios - With some fantasy the circuit can be easily assembled on a small scrap of pre-perf board,and then fitted in the DB9 serial connector shell. The interface requires two NPN transistors and few more passive components.
  [ Hits: 116 | Votes: 0 | Rating: 0 ]

Pages: [prev] 1 2