Donner's digital interface
- Donner's digital interface sales. Interface that will let you connect your amateur radio and computer to receive digital modes of communication like PSK31, RTTY, CW, SSTV Also have rig control interfaces.
About digital modes
- The digital modes provide a wonderful opportunity for those of us who would like to work on the HF bands but find CW too difficult and SSB phone prohibitive because of interference problems. The digital modes are easy to set up and get operating, require low power and a narrow band.
W2LJ's QRP Amateur Radio
- Dedicated to QRP, Morse Code and operating in the great outdoors, this pages contains a description of a CW QRP portable set, also some stuff on the Buddipole and PAC-12 antenna systems.
- Decode and trasmit morse code, 5 to 50 wpm ,keep hands on the keyboard, mouse free transmit/receive operation.
- This program allows CW operators to copy CW code with a computer. The decoded CW is displayed as text or can generate a side tone. There is a spectrum display of the audio with a sliding cursor to select a particular audio for decoding. The program also allows for keying a transmitter from the keyboard with full CW break-in operation.
- MorseGen converts text into a WAVE file of Morse code. The Tone and Speed are adjustable and the WAVE file can be repeated at a pre-set interval allowing it to be used as a CW Ident for amateur radio applications which require it.
WD6CNF Voice keyer
- Audio voice keyer Microphone input, speaker output Live microphone enable
Record/play audio from twelve memories
Display text of recorded audio
Transmitter keyed via serial (com) port
Loop (with variable delay) audio output
- The MicroBeacon is the combination of a memory keyer and controllable RF attenuator.
G4AXX Voice keyer Interface
- This voice-keyer-interface connects between a Yaesu FT1000MP and a PC's sound card & COM port. It can be used as a voice-keyer with Contest Voice Blaster and as a voice-keyer and CW-keyer with Writelog.
CB Mic Wiringupdatedpop
- Excellent resource for microphones wiring including old make of cb radios.
Microphone wiring can be a real pain if you arent sure how to work out which wire goes where. On this page i will try to explain the basics and also give you the wiring positions for most CB radio's
- YAESU FT-1000/MP/MARK V (filed) interface, this one of numerous RTX sound blaster interfaces you can find on the internet, but this one include:
FSK KEYING to use with the RTTY port, DVS-2 to use the interface in AFSK mode, this include all digital modes + voice keyer, CW KEYING