mt63 terminal

Antenna Transmission Line Power Splitters - Several ways of splitting power to feed two like (50 ohm terminal impedance) antennas.

Putting a Balun and a Tuner Together - Two wire transmission line as a three terminal Device , The W2DU and W7EL models of a choke balun, The effectiveness of a balun. Article by Kevin Schmidt, W9CF

K2NCC's YouTube Channel - Video samples of amateur radio, military, government, domestic and international data transmissions. Covering such digital modes as ACARS, CHIP, DOMINO, JT65, MT63, NAVTEX, and many more by K2NCC Frank

Timewave - Sells leading-edge voice and digital communications products to the world-wide military, government, industrial, and amateur radio marketplaces. Bluetooth Remote Audio/PTT, Rig Controller with Audio & PTT , HamLinkUSB Rig Control, Noise filtersm antenna analyzers, Multimode Data Controller, TNC, Packet Radio Terminal Node Controller. USB2RS232

Global Connections Plus - RF Connectors, audio connectors, terminals, cable ties

TNC-X - TNC-X - The Expandable TNC A new Terminal Node Controller (kit) design based on the Chepponis/Karn KISS protocol. It is implemented using a Microchip PIC 16F628A microcontroller, a CML MX614 Bell 202 modem chip, an 8K Ramtron FRAM

GAO Engineering - Gao engineering offers a wide range of affordable, popular and reliable rfid products, dsp, arm and other microprocessor evm and development boards, ides, universal programmers, emulators, dsp learning systems, micro-network terminals, test and measurement products for engineers.

Ham radio digital modes - An introduction to PSK31, MT63, and Hellschreiber, John DeGood NU3E Trenton Computer Festival in PDF

Sound Card Packet - This amateur radio web site explains how to use the AGWPE utility program to send and receive packet (a digital data mode) using the sound card of your PC instead of a traditional TNC (Terminal Node Controller), a radio modem.

RadioDXCluster - MacOSX configurable terminal software used to control your TNC (Terminal Node Controller) to connect with your local AR-DX Cluster using your radio. This program combines features contained in MacTNC, a TNC control program, and NetDXCluster (formerly MacDXCluster), similar software that accesses DX Clusters via the Internet rather than a radio link.

M8000 Terminal Software - This software allows your PC to connect to the Universal Radio M-8000 Decoder through its serial port in order to get and save the decoded data but also to send commands to the decoder.

Digital Master 780 - Digital Master 780 is a windows freeware multi-mode program which uses Ham Radio Deluxe for radio control. Support PSK, QPSK, Contestia, CW, DominoEx, Hell, MFSK, MT63, OLIVIA, RTTY, RTTYM, THROB and SSTV. Offer Logging functions.

DF9CY Project Auriga - PA is a JAVA software package containing several programs, SW/VHF/UHF Logbook (imports format from RADIOMAN, VMT), Log conversion to HTML format, Import and export functions for RADIOMAN, CT RES files, BV QSL Labels, CSV etc. Internet DX-Cluster support, Keeps track of your worked Callsigns, Checks your worked Grid Squares per band, Databases for worked Grids and Callsigns Uses K1EA CQWW.CTY country file, Easy command line version for terminal operation Moontracking as clock, Pathloss calculation

PSK31LX - Modification to psk31lx originally written by Hansi, DL9RDZ, uses ncurses instead of a graphical interface and can run in a terminal window

Turbolog - TurboLog is a station management and logging program for the discerning radio amateur / hamradio operator. Besides powerful database and logging functions there is a fully integrated support for the control of typical radio station equipment, e.g. Transceivers, Packet radio, Morse and voice keyer, Digital modes terminal, Antenna switching, Acoustic alerting, and more

MacTNC - MacTNC is simple, configurable terminal software used by amateur (ham) radio operators to control a TNC (terminal node controller). MacTNC performs most of the same functions of other terminal software, but includes buttons for standard commands, and allows the user to configure additional buttons for special purposes. MacTNC works only user Mac OS X because it relies on Unix components of the current operating system.

PacTerm for Windows - PacTerm for Windows is a commercial host mode terminal software for the Kantronics™ TNCs takes advantage of the true multitasking capabilities of Windows.

SV2AGW Packet Engine Professional - This is a brand new program based on the well Known "AGW Packet Engine/ AGWPE". It is a special Windows utility for amateur radio packet users that interfaces multiple packet programs and multiple TNCs (Terminal Node Controllers) / modems: lets one TNC be used by more than one packet program, lets one packet program use more than one TNC, lets your sound card be used as a physical TNC or modem, no need to buy a TNC , has an optional 'TCP/IP Over Radio' feature that lets you send TCP/IP data sentences via packet to internet gateways

MUTNC - The multiuser/multitasking BPQ Packet Terminal Driver program is a general purpose communications package for communicating with a packet TNC or Baycom modem attached to your IBM-PC/clone in conjunction with the BPQ Node software.

Packet Terminal Interface  ^updated - Simple Windows based TNC interface program Designed for ARES operation, simple operator interface to connect and perform communication functions, control operator programs screens before operations Both receive and transmit screens Simple Windows based TNC interface program Designed for ARES operation Simple operator interface to connect and perform communication functions Control operator programs screens before operations Both receive and transmit screens

PKTerm for windows - Pkterm 99 is a host mode terminal program for the timewave and aea tncs. it works with windows 95, 98, and nt.

PicturePacket - A Windows95/98/NT control program for Terminal Node Controllers. In its Lite mode it's all the software many packet users may ever need, and it's frees

TNC - The Packet Terminal Driver program is a general purpose communications package for communicating with a packet TNC attached to your IBM-PC/clone. The program was written to work with the Kantronics range of TNC's but should work with any TNC that is connected to a serial port on your computer.

VT100/ANSI terminal and Telnet client - Online is a VT100/ANSI terminal emulator and Telnet client for Palm OS organizers. Connect to Unix systems, configure routers and reprogram embedded computers.

gMFSK - Linux free multimode HF terminal program. Despite the name, gMFSK can send and receive many digital conversational modes typically used by radio amateurs on HF. Supported modes are: MFSK (MFSK16 and MFSK8) RTTY THROB (1, 2 and 4 throbs/sec) PSK31 (BPSK and QPSK) PSK63 MT63 Feldhell