nec 2 software

nec 2 software

Antennas : Rhombic

• Rhombic Antennas - Description and simulation of two types of rhombic antennas, using the software 4Nec2: the simple bi-directional and the terminated directional rhombic antenna
  [ Hits: 840 | Votes: 1 | Rating: 10 ]

• DIY Yagi Antenna - This article describes the phases for the construction of a Yagi antenna. The calculations of the parameters are made using 4NEC2 software. This type of antenna is used for transmissions and receptions of electromagnetic waves. The project shown here refers to the frequency of 433.92 MHz.
  [ Hits: 109 | Votes: 4 | Rating: 3.5 ]

• FiFi SDR - Is an economic and compact software-defined receiver. It is based on the Si570 oscillator and can be connected to a PC via the USB interface.
  [ Hits: 1117 | Votes: 0 | Rating: 0 ]

• SWR ANTENNA ANALYZER + WSPR TX - Available worldwide can be used as Arduino Shield or plug it in to you PC , or with a bluetooth adapter connect to Android. With a highly optimized software, KAI200 brings you: a. Antenna analyzer form 1 up to 200 Mhz; b. WSPR transmiter (set up by serial terminal); c. Square Wave Signal generator KAI200 is all you need for your radio whatever it is Yaesu, Icom, Kenwood or Drake and DIY projects.
  [ Hits: 327 | Votes: 8 | Rating: 9.62 ]

• Alpha 87A Remote Control - The Alpha 87A can be controlled over the internet using a TCP connection with version 2 of this software. You need one instance of the application on your remote station and one as client on a local or your home computer.
  [ Hits: 328 | Votes: 1 | Rating: 10 ]

• Programming FT-991A - Tips and tricks on programming the Yaesu FT-991A, from software installation and connecting to the PC via the USB Port, to properly programming memories.
  [ Hits: 105 | Votes: 1 | Rating: 10 ]

• EZNEC Antenna analysis  ^pop - EZNEC is an antenna modelling software based on NEC-2 for the amateur and professional. Run on MS windows platforms. Version PRO/2 V.6 and v.7 is free to use and donwload, while version PRO/4 requires a licence.
  [ Hits: 27648 | Votes: 78 | Rating: 7.32 ]
• 4NEC2 antenna modeler  ^pop - 4nec2 is a completely free Nec2, Nec4 and windows based tool for creating, viewing, optimizing and checking 2D and 3D style antenna geometry structures and generate, display and/or compare near/far-field radiation patterns for both the starting and experienced antenna modeler. Can be interfaced to HFwin32 propagation prediction software.
  [ Hits: 30104 | Votes: 131 | Rating: 7.32 ]
• NEC4WIN - NEC4WIN is a 32 bits commercial antenna simulation software based on MININEC3 developed by the Naval Ocean Systems Center in the 70s and 80s. It runs under Windows and can be used to simulate, analyze and optimize wire antennas, beams, verticals, etc. NEC4WIN has limitations. They are the same as Mininec3 on which the engine is based.
  [ Hits: 1875 | Votes: 2 | Rating: 7 ]
• GAL-ANA - GAL-ANA is an Antenna-Analyzing Tool software, based on NEC2/MININEC3m engines currently available in demo mode for download
  [ Hits: 786 | Votes: 3 | Rating: 3 ]
• NEC-Win Plus+ - Developed for beginners, hobbyists, and field engineers. Includes polar plots, rectangular plots for input impedance and VSWR, tabular data, NEC-Win Synth Light and Necvu 3D. Includes NEC2. The program also offers stepped-diameter corrections, Gain Averaging Test, CAD (.DXF) file input, 2-D and 3-D plots and antenna views, and graphical outputs. Run on older Windows version and is out of support.
  [ Hits: 314 | Votes: 2 | Rating: 4.5 ]

• KST2Me - ON4KST chat free telnet based client for Windows, provides a web based appearance while maintaining the bit lean connection and telnet speed.
  [ Hits: 959 | Votes: 8 | Rating: 9.74 ]

• R-20 Signal Capture and Analysis Software - Connect your R-20 Communications Receiver to your computer. Put your listening hobby on your computer desktop.
  [ Hits: 841 | Votes: 6 | Rating: 6.5 ]

• DMR Contact Manager - DMR Contact Manager is a Free software package designed to make it easy to maintain channel, zone, contact and call group information in these radios. It is fully compatible with the Ham-Digital and RadioID database systems and allows instant codeplug updates from a wide variety of sources. DMR Contact Manager is designed for use with Connect Systems CS700/CS701/CS750/CS800/CS801/CS800D radios, as well as the Tytera MD-380/390/390GPS, TYT MD2017/MD9600, AnyTone AT-D868UV and AT-D858, Retevis RT3, and similar radios that use the RDT/RDB file formats.
  [ Hits: 358 | Votes: 2 | Rating: 9 ]

• Connect you MacOS to CAT Serial Port - How to connect an Apple MacOS to a USB Radio transceiver. Get a Mac driver for ICOM IC-7100, IC-7200, IC-7300, IC-7600, IC-7610, IC-7850, IC-9100, PCR2500, Kenwood TS-890S, TS-990S, TS-590S, Elecraft KX3, K3S, Yaesu FTdx3000, FT-891, FT-991 or Ten-Tec Eagle USB direct connect built in USB/Serial adapter.
  [ Hits: 230 | Votes: 0 | Rating: 0 ]