packet 232

J-Pole Antenna for your Packet Radio Station - Yo5ofh j-pole antenna plans for 2 and 6 meters

WB4WOR Propagation Beacons - WB4WOR Propagation Beacon on 6 and 10 meters Jointly Owned and Operated by the Broadcast Packet and Repeater Group and Piedmont Amateur Radio GroupRandleman, NC USA

Bavarian Packet Radio Group - This site provides information about the BayCom packet radio hard- and software for radio amateurs. It also contains general information on the German packet radio network.

PY1LEO - Leonardo - ham radio,antennas,satelites,rtty,cw,packet,forum,my blog,and other aplication ham radio

IW0QNL's HamRadio Web Server - Packet Cluster and BBS hamradio online, Server APRS and other.

PacComm Packet Radio Systems - Packet Modems, tnc, portable tnc manufacturer

Pactor - PACTOR can be viewed as a combination of two earlier digital modes, packet radio and AMateur Teleprinting Over Radio (AMTOR). PACTOR provides improved throughput because its transmission speed adapts to the quality of the link and it uses Huffman compressed characters.

Q15X25 - Q15X25 is a packet modem with a KISS/AX.25 interface designed for HF transmission of AX.25 packets and TCP/IP using Automatic Repeat reQuest (ARQ) and forward error correction (FEC).

USPacket - USPacket is dedicated to networked amateur radio.

WA4DSY 56KB RF Modem - This is a prototype of the WA4DSY 56KB RF modem. It is intended for use on amateur packet radio networks. The modem generates RF in the 28 to 30 mhz range and requires and linear transverter to convert the signal to a UHF or microwave ham band

Clusters and Packet Radio - Introduction to the use of clusters and Packet Radio, hardware, settings and commands by ON4SKY

Kenwood ts-2000 and packet/digital mode - Using the TS-2000 for packet and digital modes. How to connect the Kenwodd TS2000 to TNC

FT-1K OptoCAT - The simple and safe RS232 CAT interface for Yaesu FT-1000MP, FT-1000MP Mark V and FT-1000MP Mark V Field rigs

Pk232 and FT-1000 - Wiring the PK-232MBX to the Yaesu FT-1000MP or FT-990

APRS-Beacon - The purpose of the APRS-Beacon is to provide simple APRS-compatible position beacons for up to three Objects. It is designed to 'stand alone' and does not monitor other traffic on the frequency. It can use a single-port TNC (in 'native' mode), a single- or dual-port TNC in Kiss mode or the AGW Packet Engine in order to transmit on up to four radio ports.(When running with AGWPE, APRS-Beacon will also work with Windows 2000)

DxLink Priority listing - DxLink, a freeware DX cluster user software. Connect via Telnet or packet. CAT-interface and telnet out to run with your favorite logging software. Now version 1.5

Turbolog - TurboLog is a station management and logging program for the discerning radio amateur / hamradio operator. Besides powerful database and logging functions there is a fully integrated support for the control of typical radio station equipment, e.g. Transceivers, Packet radio, Morse and voice keyer, Digital modes terminal, Antenna switching, Acoustic alerting, and more

SV2AGW Packet Engine Professional - This is a brand new program based on the well Known "AGW Packet Engine/ AGWPE". It is a special Windows utility for amateur radio packet users that interfaces multiple packet programs and multiple TNCs (Terminal Node Controllers) / modems: lets one TNC be used by more than one packet program, lets one packet program use more than one TNC, lets your sound card be used as a physical TNC or modem, no need to buy a TNC , has an optional 'TCP/IP Over Radio' feature that lets you send TCP/IP data sentences via packet to internet gateways

MUTNC - The multiuser/multitasking BPQ Packet Terminal Driver program is a general purpose communications package for communicating with a packet TNC or Baycom modem attached to your IBM-PC/clone in conjunction with the BPQ Node software.

Packet Terminal Interface - Simple Windows based TNC interface program Designed for ARES operation, simple operator interface to connect and perform communication functions, control operator programs screens before operations Both receive and transmit screens Simple Windows based TNC interface program Designed for ARES operation Simple operator interface to connect and perform communication functions Control operator programs screens before operations Both receive and transmit screens

Easyterm EZT3271  ^updated - Easyterm for Windows(3.xx and above) is a sophisticated commercial application written for the amateur operator who wants to utilize all of the features of the AEA, HAL, Kantronics or SCS (PTC-II) modems from Packet to AMtor, PACTOR, PACTOR-II(PTC-II), GTor(Kam+), Clover(HAL) or PSK31 (PTC-II).

Lan Link for Windows - Lan Link for Windows by G3ZCZ, Internet interface to CXCluster, Controls PK-232, PK-900, PK-88, KAM, KPC-3, MFJ1278, and TNC2, PSK31 via the sound card in the PC, eQSL interface

RS232 interface for Kenwood rigs - SS232K - The simple and safe RS232 interface for Kenwood radios

FT8x7 OptoCAT - The safe RS232 CAT interface and PA buffer for Yaesu FT-817, FT-857, FT897 and FT-100 rigs

K2 OptoCAT - The safe RS232 CAT interface and PA buffer for Elecraft K2