pc cat software
15 links
- LoopControl
- HB9MTN loop motor control software.
For motor control, either Centronics, RS232 or USB ports can be used, for CAT-Control the RS232 or USB ports.
[ Hits: 1211 | Votes: 0 | Rating: 0 ]
- Mt-63 technical description
- The MT-63 modem, constructed around a high speed DSP processor, either in a dedicated external DSP unit like the Motorola EVM, or in PC software using the PC sound card, transmits 64 tones spaced 15.625 Hz apart, in the 1 kHz bandwidth.
[ Hits: 632 | Votes: 0 | Rating: 0 ]
- VectorFox
- VectorFox is a software born to incorporate a PC into the fox hunting environment. VectorFox is able to take inputs from up to 5 sources, such as a 2m beam, a 2m signal meter, a TDOA, etc, and display the results on the screen. VectorFox also accepts Agrelo inputs. From these results the operator can choose which indication is best and have a line drawn on the map in the direction of the signal.
[ Hits: 1412 | Votes: 0 | Rating: 0 ]
- IC7300BKT Icom IC-7300 CAT Control
- Windows PC control program for the Icom IC-7300 transceiver. Power-on and Power-off by software BktNetInterface for JTDX and WSJT-X, audio recording, memory management, cw keyer management, Interface for other software
[ Hits: 463 | Votes: 2 | Rating: 7 ]
- Baofeng UV-5 Programming Cable
- Baofeng UV-5R uses RS232 to communicate or programming with the PC software and you can make your own programming cable with a few components.
[ Hits: 439 | Votes: 2 | Rating: 7.5 ]
- Psion ham software
- Amateur radio programs to download, locator , log, etc... for Psion Aprs maps for PC (ui-view)
[ Hits: 3588 | Votes: 28 | Rating: 5.94 ]
- Big Fat Tail Productions
- PocketSat is a full-featured satellite tracking application for PalmOS and PocketPC devices. It is designed to be usable by both experienced satellite trackers as well as novices who are interested in knowing when they can simply look up and see satellites.
[ Hits: 6753 | Votes: 11 | Rating: 4.55 ]
- MacDSP
- Digital filter for Macintosh computers with a PowerPC processor
[ Hits: 1878 | Votes: 1 | Rating: 3 ]
- MUBAY
- The multiuser/multitasking BayCom Packet Terminal Driver program is a general purpose communications package for communicating with a BayCom modem attached to your IBM-PC/clone in conjunction with the TFPCX Baycom driver software. The software will also work with a normal TNC if it supports KISS mode, such as the Kantronics range.
[ Hits: 1481 | Votes: 1 | Rating: 9 ]
- MUTNC
- The multiuser/multitasking BPQ Packet Terminal Driver program is a general purpose communications package for communicating with a packet TNC or Baycom modem attached to your IBM-PC/clone in conjunction with the BPQ Node software.
[ Hits: 1255 | Votes: 0 | Rating: 0 ]
- BuTel Software
- Software Information PC Interfaces for the scanning radio hobbyist & professional radio control applications
[ Hits: 15497 | Votes: 14 | Rating: 7.15 ]
- GBCAT
- GBCAT is free PC software for controlling amateur radio devices through a COM/USB port or through a TCP/IP network, with the ability to transfer a 2-way audio signal over a TCP/IP network supporting Yaesu FT-857 FT-817 FT-897, Icom IC-706MKIIG, Kenwood TS-2000 and TS-590S by 9A2GB.
[ Hits: 2528 | Votes: 44 | Rating: 9.14 ]
- Test Tone Generator
- This Test Tone Generator (TTG) turns your PC into a function generator and enables you to demonstrate, test and tune sound systems, create sound effects and a whole range of other uses to suit your needs. It can also be used for educational purposes.
[ Hits: 14753 | Votes: 32 | Rating: 5.5 ]
- Automatic antenna switch with Arduino Nano
- Arduino Nano board based antenna coax antenna switch intended for use with ICOM CI-V protocol. When is used alone with transceiver without PC control (CAT software, any logging software with CAT functionality), the CI-V transceive option in TRX setup shall be set to ON.
[ Hits: 141 | Votes: 1 | Rating: 9 ]
- Connect you MacOS to CAT Serial Port
- How to connect an Apple MacOS to a USB Radio transceiver. Get a Mac driver for ICOM IC-7100, IC-7200, IC-7300, IC-7600, IC-7610, IC-7850, IC-9100, PCR2500, Kenwood TS-890S, TS-990S, TS-590S, Elecraft KX3, K3S, Yaesu FTdx3000, FT-891, FT-991 or Ten-Tec Eagle USB direct connect built in USB/Serial adapter.
[ Hits: 230 | Votes: 0 | Rating: 0 ]
Not satisfied ? Lookup Google Custom Search Engine for pc cat software
Search pc cat software with: Yahoo!, DuckDuckGo
, Bing
Search
Related Searches
You can try similar terms
ads-b software ask software atu software for hf ax.25 software az software ci-v software cw cat software cw software df software dsp software dx net software dx software eme software eve software fsk software
Get our links, Everywhere!
Follow us on Social Networks
|
RSS Feeds |
Sign up for daily Newsletter
Service provided by Google FeedBurner
Free for your Site
Add our gadgets to your site
Daily Top 10 links