pole mount756 links and 10 categories about pole mount on dxzone.com |
Refine your search: pole mount
Site listings
Antennas : 10M
10 Meter Wire Jpole
- A vertical en-fed zepp for 28.4 Mhz by N1LO
Rotary dipole for 12/17 meters
- A home brewed rotary dipole antenna for 12 and 17 meters band with pictures and construction details
An effective 3 band Wire DX aerial
- A 3 band dipole for 10 15 and 20 meters band by Mel G4WYW
2 meter dipole antenna
- Pictures comments and detail on a 2 elements antenna for 2 meters band
Build a hanging dipole for two metres
- Described here is a simple omnidirectional, vertically-polarised dipole for two metres
Rotary Dipole for 30 and 40 meters band
- Drawings pictures and notes on a rotary dipole antenna for 30 and 40 meters band
A centre-fed co-axial dipole for 4m
- Easy to setup dipole antenna for 4 meters band by Tony Hawker G4CJZ
Six Metre Portable Dipole
- A portable dipole for six meters band
QRP 80 Metre Slinky Dipole
- M0WYM slinky dipole setup into an attic.
Coaxial cable dipole for 80m
- Here are some simple antennas you can build along with calculators to help you get the right length.
Folding the Dipole
- Invented by Heinrich Hertz in around 1886, the half wave dipole is still one of the most simple and practical of antennas and still very much in use today. It consists of a half wavelength long centre fed conductor
QRP Fan Dipole
- Attic dipole antenna that allow to operate QRP from 40 metres to 10 metres, specifically 40, 20, 17, 15 & 10 metres by M0WYM
Short 40m dipole
- The GM4JMU Shortened 7Mhz Dipole
K0RWU Multiband dipole 6-17 meters
- This antenna consists of 4 resonate dipoles made from 12 insulated copper electrical wire. The dipoles are resonate on the following bands: 6 meters, 10 meters, 12 meters and 17 meters.
The Galaxy dipole
- A very short dipole with a good radiation efficiently plus a respectable bandwidth by S. C. Chuck Smith, WA7RAI
Mobile 10/80 dipole antenna setup
- A mobile setup using a dipole antenna for 10 to 80 meters band in italian
L Match ATU for QRP
- The L match is designed for the matching of random and long wires and should not be mounted in a metallic box/case, i used a small plastic food container which was the most expensive part of the project.
2 metre jpole antenna
- A two metre antenna project
KE4UYP One wavelenght loop antenna
- A Loop antenna plan with a gain over one Dipole of 3DB or 5.15DBi
N3OX Multiband vertical
- This vertical antenna consist of a 18 meters telescopic pole and allow operations from 160 to 30 meters band, project by Daniel Zimmerman N3OX
BiQuad Antenna for 144/440
- This is a vertically polarized Broadside and Collinear Array each Loop is a vertically polarized Broadside Array both the right and the left side of the Loop is a bent 1/2 wave dipole working 180 degrees out of phase with the other one and that gives you 4.15dbi of gain by KE4UYP
The Balcony Boomer Antenna
- This antenna is an experimental combination of a 1/4 wave monopole and yagi style reflector
The K0NR Weblog
- Stuff about amateur (ham) radio, especially VHF/UHF, QRP, portable and mountaintop operating
BnM Poles
- Fiberglass and Bamboo poles
Operating from a scooter
- Activities from a scooter by IK4DCS using a dipole
Searches related to
pole mount
pole mount j-pole mount car mount mount mag mount box to mount cb in cb mount mount isa nmo mount antenna mount roof mount radio mount wall mount mount laurel nemarc mount
Search on Google

More RSS Feeds | Put in your site our Top 10 links