ro3.13.00 program

G0GJV VHFLog - VHF contest logging program, run in DOS mode

Islands, Castles and Portable Operations - Island DXpedition and portable operations, including present, up-and-coming operations, IOTA, NON-IOTA, IOSA, IIA, ILIA, DIB, Lighthouse, and other Island Award Program operations

Sarasota County Auxiliary Communications Service, - The Sarasota County Auxiliary Communications Service, ACS, (Formerly Sarasota County ARES, RACES) is a program created to provide emergency communications for the Red Cross and Sarasota County Emergency Management.

Smith Chart Software - SimSmith is a highly interactive, real time Smith chart graphing program. Circuits are constructed using drag-n-drop. Load files can be imported from the EZNEC and CocoaNEC antenna simulation software and from the AIM4170 and miniVNApro antenna analyzers. Circuits and load files can be of any size. Key Features: SimSmith is one of the few Smith chart packages which models transmission line losses. SimSmith also allows the description of circuit elements using algebraic equations. SimSmith has only one screen and allows the screen to be resized to increase workspace or readability.

AwardsHunter - This program has been created for Amateur Radio operators who enjoy collecting various awards as part of their hobby. It is also for hams who always wanted to play the "awards game", but never could, for lack of time. Well, we hope to give them all a helping hand, with a sophisticated, yet easy-to-use program we created.

Jason - Jason is a weaksignal communication program, especially tailored for LF work.

WD6CNF DSP Filter - Audio Digital Filter, two bandpass filters, three notch filters, two noise filters graphical setting of filter center frequency and bandwidth Drag vertical lines on top of signal, Microphone input, speaker output Mono, 5 kHz bandwidth

Phase 3D (AO-40) Decoder - This program demodulates the telemetry data signal transmitted by the AO-40 satellite (aka Phase III-D) using the PC sound card

WinGrid & DOSgrid - Gridconv.zip contains Wingrid.exe and Dosgrid.exe, DOS and (16 bit) Windows versions of a simple program that converts between NGR, Maidenhead Locator, QRA, and Latitude/Longitude. They are copyright, but freely distributable for no charge.

LocCalc - Distance and directions calculation program using both Spheric, the perfect round earth model, and Vincenty's inverse ellipsoid algorithm, the WGS 84 earth model.

SlowHell - A MT Hell dos transmitting program by DF6NM

CQiNet, linking Ham Radio - CQiNet is a family of programs that combine Ham Radio with the Internet using Voice over IP (VoIP) technology. Two programs are currently in the family, "theBridge" and echoLinux. Thebridge is a iLink/EchoLink compatable conference bridge that runs under various versions of Unix as well as Windows. EchoLinux is a EchoLink client program for the Linux operating system.

Turbolog - TurboLog is a station management and logging program for the discerning radio amateur / hamradio operator. Besides powerful database and logging functions there is a fully integrated support for the control of typical radio station equipment, e.g. Transceivers, Packet radio, Morse and voice keyer, Digital modes terminal, Antenna switching, Acoustic alerting, and more

CW Decoder - Decode and trasmit morse code, 5 to 50 wpm ,keep hands on the keyboard, mouse free transmit/receive operation.

CW Decoder  ^pop - This program allows CW operators to copy CW code with a computer. The decoded CW is displayed as text or can generate a side tone. There is a spectrum display of the audio with a sliding cursor to select a particular audio for decoding. The program also allows for keying a transmitter from the keyboard with full CW break-in operation.

FNpsk - The FNpsk program provides for accurate message handling and net management of amateur radio emergency communications using the PSK31 or PSK63 digital formats

Packet Terminal Interface - Simple Windows based TNC interface program Designed for ARES operation, simple operator interface to connect and perform communication functions, control operator programs screens before operations Both receive and transmit screens Simple Windows based TNC interface program Designed for ARES operation Simple operator interface to connect and perform communication functions Control operator programs screens before operations Both receive and transmit screens

eQSLMaster - eQSLMaster is a HAM radio program, that allow to perform various functions using the Electronic QSL Card Centre (eQSL.cc). With eQSLMaster users of the eQSL.cc system have the ability to upload an entire ADIF format log file (or single QSO) and have it deposited into eQSL central database using LogServices.

RigResident - RigResident is a small program for RIG control, which does allow to set and read data of connected tranceiver (frequency, mode etc). RigResident supports more than 70 TRX models from ICOM, KENWOOD, YAESU and Ten-Tec.

SpectraScope - SpectraScope is a simple Windows interface program allowing your computer to view up to two audio waveforms in either the time or frequency domain. The program is a Windows soft panel operating as a dual channel oscilloscope and spectrum analyzer. The useful frequency of operation is 20 to 10,000 Hz in the time domain and 20 to 20,000 Hz in the frequency domain. The program uses the computer sound card to capture the audio input.

WD6CNF Voice keyer - Audio voice keyer Microphone input, speaker output Live microphone enable Record/play audio from twelve memories Display text of recorded audio Transmitter keyed via serial (com) port Loop (with variable delay) audio output

HamView - A freeware program to dig out weak signals buried in noise, functionally similar to the excellent FFTDSP of AF9Y, but with the added bonus of real time audio filtering of the incoming signals. Just point and click with the mouse, and the selected signal will stand out from the QRM and noise.

Audio spectrum analyzer  ^pop - Analyzes audio from 10 Hz to 20 kHz, input from microphone or wave file, Variable sample rates (8000 Hz, 11025 Hz, 22050 Hz, 44100 Hz) Variable transform sizes (1k, 2k, 4k, 8k) Upper and lower limits adjustable Continuous, averaged, peak hold

Programming VHF/UHF Radios - Programming a new VHF/UHF radio usually proves to be a frustrating experience for most new amateur radio operators. A new radio must first be programmed for simplex and repeater operation before it can be used to communicate with local hams.

Kenwood to pc serial ports - Simple, low cost interface between Kenwood serial ports and contest logging programs by Bob Wolbert, K6XX