six pack

A dipole for 6 meters band  ^pop - Six meters band dipole horizontal or vertical

Travel loop antennas Priority listing - PA11019 Travel loop antennas, these antennas cover 6.300 to 29.200 mHz , handle 35 Watts and have a packing size of 43 cm, ideal for fieldwork, or mobile operations.

WB4WOR Propagation Beacons - WB4WOR Propagation Beacon on 6 and 10 meters Jointly Owned and Operated by the Broadcast Packet and Repeater Group and Piedmont Amateur Radio GroupRandleman, NC USA

Six meter beacons - Beacons transmitting on 50Mhz band

Heard on Six - The Real Audio 6m DXCC on the web by ik0fta

USPacket - USPacket is dedicated to networked amateur radio.

WA4DSY 56KB RF Modem - This is a prototype of the WA4DSY 56KB RF modem. It is intended for use on amateur packet radio networks. The modem generates RF in the 28 to 30 mhz range and requires and linear transverter to convert the signal to a UHF or microwave ham band

An Introduction to FlexNet - Features and operation of FlexNet packet networking software are discussed. Details of the software architecture, RMNC and MS-DOS hardware platforms, applications, user interface, adaptive parameters, and routing techniques are presented.

Clusters and Packet Radio - Introduction to the use of clusters and Packet Radio, hardware, settings and commands by ON4SKY

Kenwood ts-2000 and packet/digital mode - Using the TS-2000 for packet and digital modes. How to connect the Kenwodd TS2000 to TNC

CutRate Batteries - CutRate Batteries supplies fully compatible, after market battery packs for two-way radios and barcode scanners. Our products are guaranteed to work with Motorola, Kenwood, Yaesu, Vertex, Icom, Telxon, Intermec, LXE and PSC two-way radios and barcode scanners.

APRS-Beacon - The purpose of the APRS-Beacon is to provide simple APRS-compatible position beacons for up to three Objects. It is designed to 'stand alone' and does not monitor other traffic on the frequency. It can use a single-port TNC (in 'native' mode), a single- or dual-port TNC in Kiss mode or the AGW Packet Engine in order to transmit on up to four radio ports.(When running with AGWPE, APRS-Beacon will also work with Windows 2000)

Smith Chart Software - SimSmith is a highly interactive, real time Smith chart graphing program. Circuits are constructed using drag-n-drop. Load files can be imported from the EZNEC and CocoaNEC antenna simulation software and from the AIM4170 and miniVNApro antenna analyzers. Circuits and load files can be of any size. Key Features: SimSmith is one of the few Smith chart packages which models transmission line losses. SimSmith also allows the description of circuit elements using algebraic equations. SimSmith has only one screen and allows the screen to be resized to increase workspace or readability.

DxLink Priority listing - DxLink, a freeware DX cluster user software. Connect via Telnet or packet. CAT-interface and telnet out to run with your favorite logging software. Now version 1.5

DF9CY Project Auriga - PA is a JAVA software package containing several programs, SW/VHF/UHF Logbook (imports format from RADIOMAN, VMT), Log conversion to HTML format, Import and export functions for RADIOMAN, CT RES files, BV QSL Labels, CSV etc. Internet DX-Cluster support, Keeps track of your worked Callsigns, Checks your worked Grid Squares per band, Databases for worked Grids and Callsigns Uses K1EA CQWW.CTY country file, Easy command line version for terminal operation Moontracking as clock, Pathloss calculation

OH1AA Logging program - The OH1AA logging program package is designed to handle the book-keeping of amateur radio contacts. The package contains three separate main prog- rams by which contacts are managed. Run under DOS and is freeware

Turbolog - TurboLog is a station management and logging program for the discerning radio amateur / hamradio operator. Besides powerful database and logging functions there is a fully integrated support for the control of typical radio station equipment, e.g. Transceivers, Packet radio, Morse and voice keyer, Digital modes terminal, Antenna switching, Acoustic alerting, and more

SV2AGW Packet Engine Professional - This is a brand new program based on the well Known "AGW Packet Engine/ AGWPE". It is a special Windows utility for amateur radio packet users that interfaces multiple packet programs and multiple TNCs (Terminal Node Controllers) / modems: lets one TNC be used by more than one packet program, lets one packet program use more than one TNC, lets your sound card be used as a physical TNC or modem, no need to buy a TNC , has an optional 'TCP/IP Over Radio' feature that lets you send TCP/IP data sentences via packet to internet gateways

MUTNC - The multiuser/multitasking BPQ Packet Terminal Driver program is a general purpose communications package for communicating with a packet TNC or Baycom modem attached to your IBM-PC/clone in conjunction with the BPQ Node software.

Packet Terminal Interface  ^updated - Simple Windows based TNC interface program Designed for ARES operation, simple operator interface to connect and perform communication functions, control operator programs screens before operations Both receive and transmit screens Simple Windows based TNC interface program Designed for ARES operation Simple operator interface to connect and perform communication functions Control operator programs screens before operations Both receive and transmit screens

pTrack - pTrack is a satellite tracking program for the Windows CE / Pocket PC palmtop computer. It was designed with simplicity in mind and does not support all the features found in larger satellite tracking packages.

Home Planet Release 3.1 - Comprehensive astronomy / space / satellite-tracking package for Microsoft Windows 95/98/Me and Windows NT 4.0/2000/XP

Satpro - SATPRO is an earth satellite tracking software package for the IBM-PC and compatible class of microcomputers running MS-DOS. The forte' of SATPRO over other software packages is the accuracy of ephemerides produced and the number of simultaneous propagations that can be accomplished

MM-TNC - This package contains a sample code for the MMTTY custom TNC emulation. It is supposed to run on the same PC or on the remote PC, and offers the functions of the TNC emulation.

OZ2M - Beacon Keyer  ^updated - Circuit and software to build a beacon keyer, includes downloadable packages.