toroid fed vertical

10 Meter Vertical Dipole - Homebrew a vertical dipole for 28 Mhz by N2UHC

Petlowany Three-Band Burner Antenna - The Petlowany Three-Band Burner is a simple, low-cost, trapless short vertical antenna which amazingly works on three HF bands (20, 15 and 10 meters). This web page contains pictures, performance data, and enough construction details so you can homebrew your own.

Your First 160-Meter Antenna - Notes on building a basic wire vertical or horizontal antenna for 160 meters band by L. B. Cebik, W4RNL

A Potpourri of 160-Meter Verticals - A potpourri of 160-Meter vertical antennas and modeling issues, inverted-L, 3-element parasitic array, 1/4-wavelength monopole

VE6FI 160 Meter Antenna - This is a 160 meter antenna which is a shunt fed vertical. A 72 foot Trylon tower with a 6 element 15 meter mono bander mounted on the top is used as the radiating element.

The Lazy-H vertical antenna - A versatile antenna for dx work

160 Meter Vertical - This is a 90 foot tall top loaded vertical for 160 meters. It is constructed from aluminum irrigation tubing and has four sets of four guys each by w7iuv

Slim Jim 2m Vertical - This VHF 145 MHz antenna is easy to build and with no radials. It shows equal gain of 5/8 lambda. It is light weight, you can hang it somewhere (on a tree may be) and work.

The Hudson antenna - A vertical antenna for 80 and 40 meters project with lots of assembling pictures and plan by LU9DPD in spanish

The zeppelin antenna for 50 Mhz - A end fed antenna used on the big zeppelin airships (thus the name ZEPPELIN antenna) of the 1930's where the wire trailed behind the dirigible.

Using the half-square antenna for low bands - Can’t put up a really high horizontal antenna for 80-meter DXing? Maybe the vertically polarized Half-Square might be the antenna for you.

80 meters Short Dipole - The best antenna is the simple Dipole. If you have height, you even can put up a quarter wave vertical or an inverted, but sometimes you may need shorten version by 4S7NR

Top Loaded Portable Vertical - A 3.5 Mhz top loaded vertical antenna built using 2 elevated radials by DJ9RB

Loaded Vertical for 80 Meters - Another version of the DJ8RB loaded vertical antenna

Build a hanging dipole for 2 metres - Described here is a simple omni-directional, vertically-polarized dipole for two meters. Made from coaxial cable, it can be rolled up and stored in a small container

K7MEM Center-Fed Half-Wave Dipole ( 3-30 MHz) - A Center-Fed Half-Wave Dipole is probably the simplest of antennas to construct and use. It is usually suspended between two supports, from it's end insulators, and has the feedline hanging from the center.

An improved 40-80 double extended zepp - Article originally published in ARRL compendium by N6LF revisits the classic double extended Zepp to improve pattern and SWR bandwidth. The DEZepp is essentially two end-fed collinear dipoles.

N6TWW 2 meter Halo - 2 Meter Halo Antenna by Mike Fedler N6TWW Including descriptions so you can build your own

Radial System Design - Are the lengths of antenna radials related to the height of a vertical? By N6LF

Another way to look at vertical antennas - What iss the difference between a dipole and a vertical? Maybe not as much as you think. Come along and try another point of view.

Verticals. Ground systems and some history - Article gives a good overview of the basics and reflects the accepted wisdom from BC antenna work.

Effects of Very Large Ground Screens - A theoretical and experimental study of the effects of very large ground screens on 20 meter verticals

Short radials for ground-plane antennas - Think your elevated radials always have to be full size? N6LF lets you in on some great ideas to lessen the “wingspan” of radials, especially near the beach.

Cushcraft R5 maintenance - Maintenance and repair of a Cushcraft R5 vertical antenna

LA6PB's split dipole - A new method of feeding a dipole with toroids.