transmitter board

transmitter board

Manufacturers : QRP Kits

• Breadboard Radio - Maker of QRP Kits, QRP CW receiver and transmitters, audio CW Filters, antenna tuners, dummy loads, and morse code practice oscillator
  [ Hits: 1313 | Votes: 1 | Rating: 10 ]

• ADALM-PLUTO SDR - The Adalm Pluto by Analog Devices is a Portable self-contained RF learning module, based on Analog Devices AD9363--Highly Integrated RF Agile Transceiver and Xilinx® Zynq Z-7010 FPGA. Includes one transmitter and one receiver, half or full duplex and cover 325 MHz to 3.8 GHz
  [ Hits: 164 | Votes: 2 | Rating: 10 ]

• CW Decoder  ^pop - This program allows CW operators to copy CW code with a computer. The decoded CW is displayed as text or can generate a side tone. There is a spectrum display of the audio with a sliding cursor to select a particular audio for decoding. The program also allows for keying a transmitter from the keyboard with full CW break-in operation.
  [ Hits: 53206 | Votes: 79 | Rating: 6.4 ]
• CW Decoder - This free windows program allows CW operators to copy CW code with a computer. The decoded CW is displayed as text or can generate a side tone. There is a spectrum display of the audio with a sliding cursor to select a particular audio for decoding. The program also allows for keying a transmitter from the keyboard with full CW break-in operation.
  [ Hits: 3373 | Votes: 9 | Rating: 5 ]

• OZ4HZ APRS tracker - The 4Hz tracker - APRS tracker with AT89C4051, now also with 5W transmitter onboard.
  [ Hits: 1059 | Votes: 8 | Rating: 8.87 ]

• The WB0RIO 28 Mhz Arduino Beacon - This project involves the construction of a 5 Watt Morse code beacon transmitter that operates in the 28.200 to 28.300 section of the 10 Meter Amateur Radio band. The beacon controller uses an Arduino Uno microprocessor board to produce the three signals that control the transmitter.
  [ Hits: 625 | Votes: 0 | Rating: 0 ]

• 2M Programmable Fox-Or Transmitter - The 2 metre fox-or transmitter is a small low power transmitter which mounts in a small plasic pipe and runs off two AA batteries. The board measures just 12mm by 70mm.
  [ Hits: 1065 | Votes: 2 | Rating: 1 ]