vertical spider

vertical spider

Antennas : 160M

• 160m Vertical antenna - A vertical antenna for the top band, made with a 26m fiberglass spiderpole by DJ0IP
  [ Hits: 2949 | Votes: 2 | Rating: 7.5 ]
• 160m 80m Vertical Antenna - A dual band vertical antenna for 160 and 80 meters band, on a 18m spiderbeam fiberglass pole. This vertical is a good compromise when you want good performance on these two low ham bands and don't have the space to install two seperate antennas.
  [ Hits: 186 | Votes: 0 | Rating: 0 ]

• VDA Antenna for 30m  ^new - This project documents the construction and enhancement of a 30m Vertical Dipole Array (VDA) antenna inspired by Remco 7QNL article. Initial design utilized an 18m Spiderbeam pole and a 4m boom. Improvements included a lighter boom structure using fishing rods and a revised coaxial arrangement for enhanced mechanical stability.
  [ Hits: 38 | Votes: 0 | Rating: 0 ]

• 40m vertical antenna - A simple quarter-wave length vertical for 40m band using a 12 m spiderpole
  [ Hits: 2033 | Votes: 1 | Rating: 7 ]

• 80m Inverted-L 12m Spiderpole - An Inverted-L with its long leg sloping to the ground. It will still work very good, even if the horizontal wire has to be sloped diagonally to the ground, as long as you have enough horizontal space to keep it at about a 45 degree angle or more from the pole.
  [ Hits: 150 | Votes: 0 | Rating: 0 ]
• 80m Vertical - This is a FULL SIZE quarter-wavelength vertical made on a 18m Spiderbeam fiberglass telescoping Spiderpole
  [ Hits: 139 | Votes: 0 | Rating: 0 ]

• 80m-40m Dual-Band Vertical - A dual band 40-80 vertical antenna on an 18m Spiderbeam Fiberglass Spiderpole, with monoband performance
  [ Hits: 160 | Votes: 2 | Rating: 10 ]