yagi 4 el

yagi 4 el

Pages: [prev] 1 2 3 4 5 6 7 8 [next]

• 2 Element Wire Yagi for 10 meters band - A page with an embedded video about a two elements yagi antenna for 28 MHz based on the original antenna design by VE7CA
  [ Hits: 283 | Votes: 1 | Rating: 8 ]
• 5 element Yagi antenna for 10 meters band - This 10 meter antenna is right out of the ARRL Antenna Book. There are 5 elements on a 24 feet boom and it performs well from 28.0 to 28.9 MHz.
  [ Hits: 194 | Votes: 2 | Rating: 6 ]

• The Vertical Buddi Beam for 20m - The Vertical Buddi Beam on 20m using no Coils. n this article I am going to describe a totally new way to construct and use a very old design the two element Yagi antenna. Unlike the traditional Yagi this design does not require a Tower or a boom, it is 100 percent portable and most important high- performance and easy to assemble using standard Buddipole components.
  [ Hits: 579 | Votes: 2 | Rating: 4.5 ]

• 23cm 1296MHz Field Day Yagi - 23cm 1296 MHz Field Day Yagi Construction, a 26 element conventional-style design. Article with several pictures and detailed homebrewing instructions
  [ Hits: 334 | Votes: 0 | Rating: 0 ]
• 43 Elements Yagi Antenna for 23cm band - An interesting presetnation full of usefull tricks to correctly design and build 23 cm Yagi using simple tools. The basic design of the antenna presented in this document is taken from the original DL6WU Yagi Design published in 1982
  [ Hits: 433 | Votes: 1 | Rating: 8 ]

• The Arrow Antenna Portable VHF antenna - This article is about a 4 element yagi VHF antenna designed to be easy to be assembled and suited for portable operations
  [ Hits: 508 | Votes: 0 | Rating: 0 ]
• Lightweight 144 MHz Yagi antenna - A Lightweight 2m Yagi for SOTA. The boom is 20mm PVC electrical conduit and the elements are 2.4mm aluminium TIG welding rod. The antenna is carried as a single length of conduit with the elements stowed inside the boom, sealing them in with a bung. The driven element is connected directly to 50 Ohm coax with a BN-43-202 balun core to decouple the coax shield.
  [ Hits: 178 | Votes: 0 | Rating: 0 ]
• 9 Element Yagi for 144 MHz - A portable Yagi antenna for 2 meters band.
  [ Hits: 156 | Votes: 1 | Rating: 1 ]

• 40m 2 elements HQ Traps Yagi - The longest element has a total length of 14m and has a boom length of 5.5 meters featuring a total bandwith of 166 kHz
  [ Hits: 174 | Votes: 1 | Rating: 8 ]

• 6 Elements Yagi Antenna on 50 MHz - This is a design based on the QuickYagi 4 software by WA7RAI with some changes for practical reasons. The beam uses 6.5 metres of standard 25mm square boom, 12mm diameter elements without tapers. The actual boom length used is 6.3 metres and all parts are readily available.
  [ Hits: 134 | Votes: 2 | Rating: 6 ]
• 3 Elements Yagi LFA for 50 MHz - A short 3 element LFA Yagi for 50MHz with a 1.94M boom. This antenna has been designed in order to minimise the upward and downward lobes typically seen the the EL plane on Yagi antennas.
  [ Hits: 226 | Votes: 2 | Rating: 8 ]
• Homebrewing a 6 Meter Yagi - Six meters is a great band for home built Yagis. The elements are reasonably small, but not so small that building tolerances are critical. With careful construction and detailed instructions, it is certainly feasible to build no-tune Yagis up to 432 MHz.
  [ Hits: 471 | Votes: 0 | Rating: 0 ]

• Cross-Yagi 10el Antenna for 70cm - 10 Elements Cross-Yagi Antenna for 433 MHz. The base of the 10el antenna is the recalculated RA6FOO antenna.Circular polarization is realized - by a phasing quarter-wave line, matching of horizontal and vertical polarization antennas
  [ Hits: 176 | Votes: 6 | Rating: 8.83 ]
• Roving Antenna Range and Much More - A 18 elements Yagi antenna for 432/435 MHz as published on 2011 CQ VHF magazine
  [ Hits: 214 | Votes: 0 | Rating: 0 ]

• History of the Hexbeam Antennas - The original HEXBEAM was developed by Mike Traffic, N1HXA, in the early nineties. It is true that an M over W configured yagi antenna that resembled a butterfly was earlier tried successfully. But the advanced electrical design, the characteristic nesting concept and central terminal post that enable the multi band functionality along with the basic hardware design were all developed by Mike Traffie.
  [ Hits: 130 | Votes: 2 | Rating: 7.5 ]
• HexBeam Antenna Explained - A hexagonal beam is a form of the Yagi antenna which is based on parasitic principles developed early in the last century in Japan for achieving gain in one direction.How HexBeam antennas works. A hexagonal beam operates exactly like Yagi antenna, but instead of a driven element that is straight like a dipole, it is a wire bent into the shape of the letter M.
  [ Hits: 171 | Votes: 0 | Rating: 0 ]

• A cheap VHF UHF Yagi - Elements are aluminum TIG soldering rods 4.0mm of diameter, almost 1m long, these objects are light, thin and flexible based on the RZ9CJ Design
  [ Hits: 273 | Votes: 3 | Rating: 9.67 ]

• How to stack dissimilar yagi antennas - In this article the author provides some guidelines on how to solve a common problem when stacking different types of yagi antennas on the same mast, limiting the effects on gain and radiation pattern of both antennas
  [ Hits: 726 | Votes: 2 | Rating: 5.5 ]
• 13 Elements Yagi for 144 MHz - A homebrew 13 elements yagi antenna for two meters band. These project includes two model of the same antenna with a 6 and 7 meter boom length. Detailed pictures and nec files are available for download
  [ Hits: 142 | Votes: 0 | Rating: 0 ]

• SteppIR UrbanBeam Review - A review of the SteppIR UrbanBeam antenna a two element Yagi antenna working 40-6 meters. The UrbanBeam is a good choice for those thare are limited by lot size, regulations, city regulations.
  [ Hits: 191 | Votes: 1 | Rating: 1 ]

Pages: [prev] 1 2 3 4 5 6 7 8 [next]