Search results

Demonstrating the construction of a short dipole antenna tailored for the 60 meter band, this resource provides detailed instructions for radio enthusiasts with limited space. The design incorporates inductive loading using two inductors (L1/L2) made from PVC tubes, allowing for effective operation on 5 MHz. The antenna consists of 12 meters of wire, divided into four sections, with specific dimensions and materials outlined for optimal performance. Results from users indicate that this antenna can significantly enhance DXing capabilities on the 60 meter band. Feedback from operators suggests that while the design is effective, adjustments may be necessary based on individual setups, such as coil diameter and wire gauge. Many users report successful construction and operation, with some experimenting with variations to improve resonance. The practical application of this antenna design has led to successful contacts and improved signal quality, making it a popular choice among 60 meter band operators.

Testing log wire antennas and a unun by G0KYA

UK Repeaters is an iPhone app that shows all UK Based repeaters on a map. Each repeater information is shown to allow easy access and programming of your radio

Cutting out the noise using a simple coax filter to improve the poor front end filtering

FO8RZ Tahiti island OC046 by F5PHW from 2009 to 2011.

An economical dipole for simple QRP HF homebrew rigs

How to connect and key Power Amplifiers to Kenwood TS 590 or TS 990. How to home made custom Remote cable to key power amplifiers by JG1VGX

Modoification for the Yaesu FT-8800 144/430 MHz dual band FM transceiver

A custom modification RC-D710 GPS-INSIDE mod.

How to enable a full TX coverage on the Yaesu FTDX101D the european version.

Cushcraft A3S performances with the A743 kit to add 30 and 40 meters

A simple UHF Crystal Radio wired up to check for reception of VHF/UHF signals in the vicinity of the shack.

Attenuating output power to Yaesu FT-817 and interesting article for really QRP operations by PA1B

Homebrew Tubes/LDMOS amplifiers, Antenna, accessories, adventures in 9Q, DX, UN missions, Contests, and more.

The 9W2VVH blog documents the amateur radio journey of Hussairy, focusing on his station setup and operational experiences from Malaysia. Content includes details about his _Yaesu FT-857D_ transceiver, which serves as the primary rig for HF, VHF, and UHF operations, often paired with a _G5RV_ antenna for HF bands. The site also features discussions on various aspects of ham radio, such as antenna experimentation and QSL card exchanges, reflecting a hands-on approach to the hobby. Operational updates frequently cover DX contacts and local ragchews, providing insights into propagation conditions and operating techniques from Southeast Asia. The blog serves as a personal log and sharing platform, showcasing the practical application of amateur radio equipment and fostering connections within the global ham community.

NVIS antennas, also known as Near Incident Vertical Skywave antennas have a high angle of radiation. Something on the order of 60 degrees, to straight up to 90 degrees. A portable, easy to setup and cheap nvis antenna project.

Taking the Raspberry Pi 2 for a Test Drive with GNU Radio. Installing GNU Radio and receiving aircraft radar with a USB TV tuner

The Icom AH-4 autotuner operates efficiently across multiple HF bands, providing seamless automatic tuning for antennas from 3.5 MHz to 54 MHz. Its robust design allows for outdoor installation, making it suitable for field operations and fixed stations. The unit interfaces with Icom transceivers via a control cable, enabling automatic band switching and tuning. The AH-4 is capable of handling up to 120 watts of RF power, ensuring compatibility with most amateur radio setups. Its weather-resistant casing and compact form factor make it a versatile choice for operators requiring reliable performance in diverse environments. Field tests demonstrate the AH-4's ability to maintain low SWR across its operational range, enhancing signal quality and transmission efficiency. Compared to manual tuners, the AH-4 offers significant time savings and ease of use, particularly in rapidly changing band conditions. Its integration with Icom radios simplifies operation, eliminating the need for manual adjustments. The autotuner's performance is consistent with other high-end models, providing a cost-effective solution for amateur operators seeking dependable tuning capabilities without sacrificing performance.

A new multi-mode QRP radio beacon built around the Arduino. The beacon started with the usual lash-up on the bench, hooking the previously reported Wotduino and DDS Shield up to a driver and a transmitter module, as previously used for the Raspberry Pi beacon

A dual band delta loop antenna resonating on 30 and 40 meters band using a single wire for the top slopers on both 30 and 40 meters and does not need any balun

By I0GEJ Weblog - Lidio Gentili

Ham radio Blog, focusing on homebrewing and testing antennas, rig mods and contesting.

The m0xpd keyer project utilizes a PIC16F628A microcontroller, offering Iambic A and B modes, adjustable speed from 5 to 40 WPM, and variable weight control. It incorporates a sidetone generator with adjustable frequency and volume, along with a PTT output for transceiver control. The design includes a 16-pin DIL IC socket for the PIC, a 3.5mm stereo jack for the paddle, and a 3.5mm mono jack for the PTT output. Powering the keyer requires a 9V DC supply, which is regulated down to 5V for the PIC. The circuit board layout is designed for through-hole components, facilitating home construction. A detailed schematic and a parts list are provided, guiding builders through the assembly process. The project also discusses the firmware programming for the PIC16F628A, essential for the keyer's functionality. Construction details cover component placement and wiring, ensuring proper operation. The keyer's compact size makes it suitable for portable or shack use, providing a reliable CW interface.

Setting up HF10 a solution for those having limited locations and wanting a low visual impact aerial by G4LDS

Decoding multiple Morse code signals automatically on a noisy RF band

Complete guide to receive weather satelite images with a RTL SDR dongle and free software

Personal Blog devoted to ham radio topics, amateur radio issues, social impact of ham radio and opinion.

FT-847 PA Mod, there is a better way, by G0MGX

A spectrum analyzer based on ATMega8 microcontroller and a CYWM6935 within a Nokia mobile phone case.

This kind of antenna has grown in popularity over the last years because it gives you a decent performance and triband capabilities. But its 50 MHz design is far from optimal. Here you can learn how to improve its 50 MHz performance in a very easy way.

About the Cushcraft A3S with A743 add-on for 30 an 40 meters

A handy solution to have a half wave antenna for fieldwork on a 12m fishing rod.

This resource, a blog from the Penang Amateur Radio Club (PARC), offers insights into various aspects of amateur radio in Malaysia. One post details monitoring Automatic Terminal Information Service (ATIS) on the 2m band, providing specific frequencies like 122.750 MHz AM for Butterworth and 126.400 MHz AM for Penang, along with sample aviation weather and operational data. Another entry critiques the lengthy and costly process of obtaining an amateur radio license in Malaysia, contrasting it with the more streamlined FCC licensing system in the United States, citing a 1-year wait and RM 414 (USD 125) for 10 years in Malaysia versus 3 weeks and USD 14 for 10 years in the US. The blog also covers internal club matters, such as the 2007 Annual General Meeting (AGM) attendance and council elections, highlighting member dissatisfaction with outdated newsletters and a call for "reformasi." Additionally, it presents local phonetic alphabets in Bahasa Malaysia and Chinese, and discusses monitoring AM broadcast bands for international stations like Voice of America on 1575 kHz and Zhong Yang Ren Min Guang Bo Dian Tai on 1134 kHz, offering alternatives to local 2m repeater chatter. The author, "firstclass," shares personal observations and criticisms regarding the Malaysian ham radio landscape.

EA2CCG´s Blog

Effects and intereferences caused by LED lights in the shack

Ham radio blog from mexico mainly in spanish

A Resonant FeeD line (RFD) antenna for 7 MHz prohect tested and tuned.

A group of local hams who operate nightly on simplex and discuss all sorts of topics

Setting up RTL-SDR, Zadig and SDR# on Windows

Yaesu FT-817 noise blanker improvement

A solar powered station by IN3AQK using a 10W solar panel charging a 12v Pb sealed battery.

Current info on DX, special events, awards, FIRAC

A modification to improve quality of built-in FT-817 Noise Blanker

Using old FM microwave equipment to operate the amateur radio 24 GHz band by EA4EOZ

Connecting and configurig an USB Sound Card key to the raspberry Pi to allow digital mode decoding and remote rig applications

Blog pour Radioamateurs. A Blog for radioamateurs mainly in french

Personal (b)log by a SWL in north Italy

Coil winding on 4 inch PVC tubing with home-made tooling.

RF Current measurements on a Long Wire W3EDP antenna

A 600W 1.8 MHz to 54 MHz power linear amplifier made using rugged MRF300 transistors featuring output power between 580W and 750W depending on band, power supply: 48V, 18A typical, 20A max