100 watt amplifier

8 links

Icom IC-PW1 Specifications - The Icom IC-PW1 is a 1000 watt linear amplifier with built-in power supply
[ Hits: 214 | Votes: 0 | Rating: 0 ]

100 Watt RF Power Amplifier for 2 GHz - Modification to an old cellular phone base station modules, with a fairly reduced output power (10 watts or so), the stock power amplifier modules will cover the 2.3 GHz and 2.4 GHz amateur radio bands.
[ Hits: 155 | Votes: 0 | Rating: 0 ]

11 KW Linear amplifier by I0JX - Use 4CX10000D / 8171, RF output power of 11 KW in key-down carrier on all bands. Power was measured with a Bird 4712 wattmeter and a 25 KW slug
[ Hits: 24577 | Votes: 33 | Rating: 7.86 ]
3-500Z Amplifier Project - This article loaded with nice pictures and schematics, describes a 160-10 meter linear amplifier that uses a pair of 3-500Z triode power tubes. It was designed and constructed by William Moneysmith, W4NFR. The amplifier features fast warm up and 1500-Watt RF output with 100-Watts of drive.
[ Hits: 1069 | Votes: 4 | Rating: 9.5 ]

Bi-Directional 2.4 GHz Amplifier - Bi-Directional 2.4 GHz One Watt Amplifier With Receive Pre-Amplifier. This will show you how to add a bi-directional, 2.4 GHz amplifier to your Proxim Symphony for under $100
[ Hits: 316 | Votes: 0 | Rating: 0 ]
432 MHz 100W RF Power Amplifier - This article describes the construction of a 100-Watt, 70 cm amateur band linear power amplifier. It is the result of a protracted period of experimentation during which I investigated a number of final amplifier stages from obsolete UHF FM 2-way radios.
[ Hits: 216 | Votes: 1 | Rating: 9 ]
100W UHF Linear Amplifier - This page details my building of a 100 Watt Power Amplifier for the 432 MHz Band based on two Motorola MRF646 transistors taking inspiration by Carlo Gnaccarini VK3PY, formerly VK3BRZ
[ Hits: 180 | Votes: 0 | Rating: 0 ]

Building a 100 Watt 2M Linear Amplifier - Article about assembling of a Dick Smith Electronics (DSE) 100 Watt VHF Linear Amplifier kit.
[ Hits: 843 | Votes: 2 | Rating: 9.5 ]