2 m 5 element antenna

113 links

Build a Lightweight 15m Yagi Antenna: Simple Design for Impressive Performance - In this article, Steve G0UIH presents a straightforward guide for constructing a lightweight 15m 3 Element Yagi antenna with impressive performance metrics. With a focus on ease of construction and efficiency, the design boasts a nearly 8.2dbi forward gain and 30db front to back ratio. Utilizing readily available materials and a hairpin match for impedance matching, this Yagi offers broad bandwidth and simple tuning for optimal operation across the 15m band.
[ Hits: 70 | Votes: 0 | Rating: 0 ]

Two elements Telescopic Yagi for 2 Meters - A lightweight PVC hand-held telescopic 2 element 2m (145 MHz) yagi using two pairs of TV rabbit ear antennas as the driven and reflector elements. Approximate directional gain is 5dB.
[ Hits: 162 | Votes: 0 | Rating: 0 ]
Budget-Friendly 5-Element Quad Antenna Design - Constructing a 5-element quad antenna, the author aimed for low cost and simplicity, resulting in an effective design with 11 dBi gain and SWR of 2:1 or better across the 2-meter band. Using wood and dowels, the antenna costs under $8 and takes less than two hours to build with basic tools. The model predicts excellent performance, confirmed by ARRL Lab measurements. Practical field results demonstrate improved communication, even in simplex mode.
[ Hits: 118 | Votes: 1 | Rating: 7 ]

A 6m beam for portable operations - A project for a six meters Yagi beam antenna, built mainly for portable operations. This is a 4 element Yagi beam with a 4 meters boom.
[ Hits: 77 | Votes: 0 | Rating: 0 ]

Roving Antenna Range and Much More - A 18 elements Yagi antenna for 432/435 MHz as published on 2011 CQ VHF magazine
[ Hits: 214 | Votes: 0 | Rating: 0 ]

Microvert Antenna for 40m by ON7IR - A mircovert antenna assembled for the 40m version of the DL7PE antenna. A one meter long aluminum tube with 24mm diameter is used for the base (element 1) and a 50cm aluminum tube with 20mm diameter for element 2 (the extention). A pvc pipe, 34cm long and with a diameter of 38mm, is used to wind the coil on (1mm enamelled copper wire).
[ Hits: 152 | Votes: 0 | Rating: 0 ]

VE6LK Fan Dipole - Multiband dipole antenna working on 80-40-20-15m, a 3 element antenna, 15m being a 3rd harmonic of 40.
[ Hits: 163 | Votes: 1 | Rating: 10 ]

Three-Element Hex Beam Project - Building the Three-Element Hex Beam. A project and construction phase of an HF hex-Beam antenna using trees to hang the antenna and a Channel Master antenna rotator.
[ Hits: 306 | Votes: 6 | Rating: 8.67 ]

The 2BD beam antenna for 20 meters - A light portable 2 element Delta beam antenna for 14 MHz. It is basically a two element delta loop wire antenna made for portable usage providing good directivity and a 4.2 dBd gain
[ Hits: 185 | Votes: 1 | Rating: 8 ]

3 Element Quad for 50 MHz - A 14.12 dBi gain three elements cubical quad antenna for the six meters band. This Quad Antenna design page include a MMA model available to download and dimensions for each element.
[ Hits: 46 | Votes: 1 | Rating: 3 ]

VHF UHF Duo band Yagi Antenna - Duoband Yagi 2m/70cm with 4 Elements on 2 m and 5 Elements on 70 cm and one Feed point. The 4-El.-Ultralight-Yagi for 2m can be used on 70cm with an SWR of 1,5 without any changes.
[ Hits: 154 | Votes: 6 | Rating: 7 ]

DIY 850 MHz Yagi Antenna - This DIY Yagi costs less than 20 Dollars, and let you increase the performance of your connection. With this project you can build a better Yagi beam antenna resonant on 850MHz, a 8 element yagi directional antenna
[ Hits: 43 | Votes: 0 | Rating: 0 ]

13 Elements Yagi for 144 MHz - A homebrew 13 elements yagi antenna for two meters band. These project includes two model of the same antenna with a 6 and 7 meter boom length. Detailed pictures and nec files are available for download
[ Hits: 142 | Votes: 0 | Rating: 0 ]