Dummy Load

The DXZone.com

Dummy Load

49 links - and 1 categories

Manufacturers : QRP Kits
  • Breadboard Radio - Maker of QRP Kits, QRP CW receiver and transmitters, audio CW Filters, antenna tuners, dummy loads, and morse code practice oscillator
    [ Hits: 1311 | Votes: 1 | Rating: 10 ]
Technical Reference : Antenna Switch
  • Antenna Switch - An home made antenna switch with a Dummy Load selector. If you forget the radio is connected to the open or grounded side of the switch and you try to transmit, it is very easy to damage the finals of your transceiver.
    [ Hits: 318 | Votes: 3 | Rating: 8 ]
Technical Reference : Dummy Loads
  • HF-MT Dummy Load by VK2KVV - A handy piece of test equipment useful for HF bands, can absorb a 200W modulated carrier for almost 2 minutes. It is housed in a tin and part filled with dry sand that helps in power dissipation
    [ Hits: 728 | Votes: 0 | Rating: 0 ]
  • Dummy Load Construction - This will document a custom version of the K4EAA Dummy load done using 20 1K ohm 3 Watt Resistors, Piece of brass sheet, a quart paint can and a BNC connector
    [ Hits: 186 | Votes: 1 | Rating: 5 ]
  • 140W Dummy Load - An homemade 50 Ohm 140 W dummy load based on an idea and project by ON5DB Renaud.
    [ Hits: 282 | Votes: 2 | Rating: 8.5 ]
  • Digital Dummy Load - Check your RF power with an easy to read and build digital display
    [ Hits: 102 | Votes: 0 | Rating: 0 ]
  • QRP Dummy Load - This is another variation on the parallel resistor, dummy load. It is perfect for QRP HF operation of 5-watts or less average power, and should be adequate for continuous operation at that level. It's light and compact, about 2-1/2 in length overall.
    [ Hits: 56 | Votes: 0 | Rating: 0 ]
  • DIY 1KW Dummy Load - F5NPV explores the construction of a cost-effective 1KW dummy load for radio enthusiasts. Purchasing a commercial dummy load can be expensive, but with basic materials such as a metal can, resistors, mineral oil, and a heat dissipator, you can build your own. The article provides a simple guide to assembling the load, including the importance of testing for inductance. The DIY dummy load yields impressive performance, with an SWR of 1.2:1 across multiple bands and the ability to handle up to 1KW of power. This budget-friendly solution is a valuable addition to any radio shack.
    [ Hits: 120 | Votes: 0 | Rating: 0 ]
Technical Reference : Power Meter
  • A 500 Watt HF Dummy Load and Power Meter - This project was published in the April 2004 issue of the Australian magazine Amateur Radio, and has been designed using parts which are very readily available.
    [ Hits: 2003 | Votes: 2 | Rating: 9 ]

Not satisfied ? Lookup Google Custom Search Engine for Dummy Load


Search Dummy Load with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search