antenna tuner for 10m

antenna tuner for 10m

Antennas : Loop

• Quad Loop Antenna for 50 MHz - Building A Full-Wave Quad Loop Antenna for 6 Meters. This is an easy antenna to build and the materials cost about $15-20. It exhibits 1.8dB gain over a 1/2-wave dipole. Using an open-wire parallel feedline (commonly called ladder line) with an antenna tuner, it tunes up on the 10m band as a 5/8-wave loop as well
  [ Hits: 187 | Votes: 1 | Rating: 1 ]

• The 5 Bands Wire-Beam - This wire-beam has one radiator-element, feeded with 450-Ohm-Wireman-twinlead and needs an antenna-tuner. For the bands 6m, 10m, 12m, 15m, 17m and 20m bended reflector-elements are used. The support is a cross of 4 fibreglass-fishing-rods
  [ Hits: 5641 | Votes: 2 | Rating: 7 ]

• Homebrew an OCF Off-Center Fed Dipole Antenna - This type of antenna is a popular antenna design as the performance is very good across the HF bands and requires little or no tuning. It’s a dipole fed off center with a 4:1 balun at the offset feed point. The antenna shown covers 80, 40, 20 and 10 meters. The formula can also be used to adjust the overall length to cover more or fewer bands and the resulting overall length. 160-10m, 80-10m or 40-10 meters depending on your available space. Other bands will require a tuner.
  [ Hits: 174 | Votes: 2 | Rating: 5.5 ]

• N4EKV.COM - Antenna Tuners - Homebrew balanced-L antenna tuner. Covers 160-10m. Designed specifically for balanced feedlines.
  [ Hits: 4724 | Votes: 2 | Rating: 10 ]
• QRP Z-Match Tuner 40-10m - The Z Match is really a basic L Match consisting of a series capcitor and variable shunt inductor, coupled to the antenna using the RF transformer action.
  [ Hits: 1767 | Votes: 0 | Rating: 0 ]

• G8JNJ Broadband HF Vertical Antenna - G8JNJ Broadband HF Vertical Antenna - Requires no tuner - great results from 40m to 10m plus 80m & 6m with reduced performance
  [ Hits: 4658 | Votes: 4 | Rating: 7 ]