aprs igate

The DXZone.com

aprs igate

13 links

Operating Modes : APRS

  • APRS in Karlsruhe Germany - APRS in Karlsruhe (Germany), APRS&WX, APRS&PSK31, APRS-WLan-Igate
    [ Hits: 430 | Votes: 0 | Rating: 0 ]
Software : Linux
  • Dire Wolf - Dire Wolf is a software soundcard modem and APRS encoder/decoder. It can be used stand-alone to receive APRS messages, as a digipeater, APRStt gateway, or Internet Gateway (IGate). It can also be used as a virtual TNC for other applications such as APRSIS32, UI-View32, Xastir, APRS-TW, YAAC, UISS, Linux AX25, and many others.
    [ Hits: 2721 | Votes: 12 | Rating: 8.67 ]
Technical Reference : APRS
  • How to make an APRS IGATE - How to make an APRS IGATE using Linux, soundmodem and aprx by HA2NON
    [ Hits: 1136 | Votes: 2 | Rating: 1 ]
  • TinyTrak 4 and APRS - Tiny Trak 4 APRS and a new IGate
    [ Hits: 548 | Votes: 0 | Rating: 0 ]
  • Build an igate - APRS4R Digipeater configuration notes by K6DBG
    [ Hits: 464 | Votes: 0 | Rating: 0 ]
  • Building an Enhanced APRS IGate with Debian 12 and Raspberry Pi - The guide outlines necessary components, including a 2m FM analog radio, USB audio adapter, and Raspberry Pi. Building a cable to connect these elements is assumed, as is knowledge of Raspberry Pi OS installation.
    [ Hits: 47 | Votes: 0 | Rating: 0 ]
Technical Reference : Arduino
  • Airgate - A Receive-Only, Low-Power APRS iGate made with Arduino
    [ Hits: 149 | Votes: 2 | Rating: 4 ]
Technical Reference : LoRa and LoRaWan
  • APRS via LoRa - Website maintained by a group of amateur radio operators who would like to bring APRS via LoRa to OMs. Try it out, participate in the development of new iGates, trackers or write a documentation for a software/firmware
    [ Hits: 49 | Votes: 0 | Rating: 0 ]
  • APRS LoRa Weather Station - The weather station described here uses a TTGO v3 1.6.2 module and various sensors. It displays the data on an OLED screen and transmits them among a choice of protocols to the APRS, APRS-IS, Wunderground servers or via an MQTT broker. APRS data is transmitted on 433.775 MHz (can be changed) using the LoRa protocol. APRS beacons picked up by iGate gateways are then transmitted to APRS servers.
    [ Hits: 105 | Votes: 0 | Rating: 0 ]
  • LoRa APRS Tracker or Igate on 433Mhz - Setting up a Lora APRS tracker using the ESP32 Lora32 TTGO-T T-Beam 433/470Mhz Module.
    [ Hits: 77 | Votes: 0 | Rating: 0 ]
Technical Reference : Raspberry Pi
  • Raspberry Pi based APRS Tracker Digipeater and iGate - A project to turn a Raspberry Pi into a very versatile tracker, digipeater and an iGate
    [ Hits: 250 | Votes: 0 | Rating: 0 ]
  • Raspberry Pi ISS iGate - This project is an APRS iGate for digipeater aboard the ISS. As the ISS pass over the iGate location, the TNC decoded the audio tones and creates data packets the Raspberry Pi can receive.
    [ Hits: 485 | Votes: 1 | Rating: 10 ]
  • LoRa-APRS-iGate - he LoRa-APRS-iGate was developed in cooperation with the Austrian HAM Radio Association. With this software and the LoRa GW Shield, devices transmitting on LoRa, frequency 433 MHz can be integrated into the APRS network. The transmitter can then be displayed on the website https://aprs.fi.
    [ Hits: 75 | Votes: 0 | Rating: 0 ]

Not satisfied ? Lookup Google Custom Search Engine for aprs igate


Search aprs igate with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search