attic

31 links

Shortened 30m Dipole - This article describes the construction of a 9,50 m long dipole for the 30 m band (10.1 MHz to 10.15 MHz). It was designed to be mounted ca. 6 m above ground inside an attic. The calculations were performed by OE1MEW
[ Hits: 124 | Votes: 1 | Rating: 1 ]

A Loft-Yagi for Six Metres - This design makes the most of having to put an aerial in the attic. This inverted-vee yagi is giving good results at GW0GHF. Directive gain is about 6 dBd. The front-to-back ratio is not brilliant, about 20 dBd.
[ Hits: 138 | Votes: 1 | Rating: 5 ]

Low Bands Indoor Antenna - An attic antenna for 40 and 80 meters band by NS1W
[ Hits: 1556 | Votes: 4 | Rating: 7.75 ]
10m Yagi for Attics - Off center fed bent 10 meter Yagi antenna for attics
[ Hits: 679 | Votes: 0 | Rating: 0 ]

A simple Attic Antenna for HF bands - This simple antenna was installed on the attic. Antenna was matched with help an Automatic ATU in 40, 30, 20, 17, 15, 12 and 10 meter amateur Bands. The Antenna worked satisfactory on the above mentioned bands.
[ Hits: 316 | Votes: 7 | Rating: 6 ]
The Infamous Attic Dipole - An attic wire antenna with several modifications during the time. Began as a simple coax fed doublet antenna, and upgraded to a multi-band hf fan dipole, till the G5RV all deployed in an attic.
[ Hits: 101 | Votes: 0 | Rating: 0 ]

More UHF Cheap Yagi Antennas - A collection of 450 MHz Cheap Yagis that have proven great portable operations, back-packing and transmitter hunts, and are something inexpensive you can throw up in the attic for that weak repeater
[ Hits: 207 | Votes: 0 | Rating: 0 ]

Radio Attic - Antique radios for sale, RadioAttic publish private antique radios offered by indipendent advertisers and collectors
[ Hits: 385 | Votes: 0 | Rating: 0 ]

The AntennaPi - This is a remote antenna switch I use in my attic to connect transceivers in the basement to multiple antennas in the attic. The goal of this project is to be able to remotely connect one of the antennas in the attic to the only antenna cable available.
[ Hits: 133 | Votes: 0 | Rating: 0 ]

Noise Canceller Project - This project was intended to accompany the stealth antenna project. Author want to see how effective a noise canceller could be in reducing the background noise floor when attic / stealth antennas are being used.
[ Hits: 709 | Votes: 0 | Rating: 0 ]

Raspberry Pi and Automatic NOAA Satellite Reception - How to receive automatically NOAA wather satellite images with a Raspberry Pi and a RTL SDR. This project requires a Raspberry Pi 3 Model B a common NooElec SDR Dongle and a QFH Antenna in the attic. Article explains how to setup and configure software but no instructions on antenna.
[ Hits: 520 | Votes: 4 | Rating: 4.75 ]