choke coax
19 links
Antennas : 20M : 20 meter Yagi antennas
- 2-Element-Yagis for HF
pop
- 2-Element parasitic Yagis for the Shortwave-Bands 10-12-15-17-20-30m. The antennas are feeded with the DK7ZB-match. A quarter-wave choke of coax is grounded at the socket.
[ Hits: 50052 | Votes: 146 | Rating: 7.08 ]
- 40m loaded dipole
- This is an short dipole for 7 MHz. Total length of this dipole is just 10 meters, 33 feet. Missing lenght is balanced by a coil made of 49 turns of a 40mm diameter pvc pipe. The use of a choke balun is recommended, as always, to adapt the unbalanced coax cable to the balanced antenna, and to prevent RF feed back along the coax shield.
[ Hits: 194 | Votes: 4 | Rating: 8.75 ]
- Choking balun for 160-30 meter band
- Choking balun for lower HF and MF bands. (1.8MHz - 10MHz). Requiring a choking balun to isolate the potential RF pick up on the coax cable as it runs past equipment such as computer within the radio room at lower HF and MF frequencies a simple method of winding RG58 coax onto a Powdered Iron Toroid Core was constructed.
[ Hits: 196 | Votes: 3 | Rating: 6 ]
- Sorbie Balun and Bottle Choke
- Homebrew a 1:1 balun consistsing of 4+4 turns of mini coaxial cable over a large ferrite core by m0pzt
[ Hits: 703 | Votes: 1 | Rating: 1 ]
- Coaxial Transmitting Chokes
- Understanding Common Mode and Differential Mode Currents on Transmission Lines by K9YC
[ Hits: 1102 | Votes: 0 | Rating: 0 ]
- Choke balun
- Essentially, a choke balun is designed to 'divorce' your antenna from the feed line. if your feed line is coaxial cable then you don't want it to be part of your antenna. you want to be able to deliver all your power to the radiator itself, i.e. 'the antenna'. a choke balun does this admirably
[ Hits: 575 | Votes: 11 | Rating: 7.27 ]
- A model of the W2DU 1:1 choke balun
- Notes on making the W2DU choke balun by placing several ferrite sleeves around a coaxial cable.
[ Hits: 9718 | Votes: 7 | Rating: 2.29 ]
- Homebrew RF chocke - Magnetic Longwire Balun
- RF Choke to prevent hf currents on the feedline. This Magnetic Longwire Balun (MLB) makes it possible to efficiently use a coaxial lead-in cable with all forms of longwires, T-forms or other types of wire antennas, without the need for an antenna tuner.
[ Hits: 3415 | Votes: 3 | Rating: 10 ]
- Trap on Coax Cable
- A trap on the coaxial cable, also known as choke, helps to eliminate the sneaking of the reflected RF- energy to the shack. The trap can be made from the coaxial cable that feeds the antenna
[ Hits: 964 | Votes: 2 | Rating: 6.5 ]
- Build your own RF-Choke
- How to make an effective RF Choke. The coiled coax choke is the easiest to make but also the least effective. This article includes some general guidelines for winding coax chokes on a 10cm PVC pipe using RG-58 or RG-213 coax cable.
[ Hits: 794 | Votes: 12 | Rating: 7.33 ]
- Do not wind chokes on red toroids!
- I happened to stumble across some antenna projects showing common mode chokes 1:1 baluns made of some turns of coax wound on T200-2 iron powder toroids.
[ Hits: 187 | Votes: 0 | Rating: 0 ]
- How to find out if your choke works
- How many times have you heard the advice to coil a few turns of coax at the antenna end to form a choke. How to find out if your common mode current choke really works
[ Hits: 211 | Votes: 1 | Rating: 9 ]
- 6 m JPole Antenna
- Based on original G2BCX design this J-Pole antenna for the six meter band is made with a homemade ribbon cable. The antenna shown in this article includes a coaxial cable choke feed to remove RF currents from flowing on the outer of the cable.
[ Hits: 1767 | Votes: 6 | Rating: 6 ]
- DIY Dual Band 144-440 MHz vertical antenna
- A homemade VHF/UHF vertical antenna made essentially with RG58 coax cable, with a 9 turns choke balun to prevent the shield acting as a RF Radiator.
[ Hits: 1377 | Votes: 14 | Rating: 5.5 ]
- Radiodan - W7RF
- BIRD RF power measuring, new and used, HENRY RF power amplifiers (used HF amps), TOHTSU coaxial relays, SAMLEX power supplies, RFI chokes reduce interference, Parts parts, tubes, Used amplifiers, radios, antennas and accessories, Los Angeles, CA.
[ Hits: 2070 | Votes: 3 | Rating: 10 ]
- Build an All Band HF Air Core Choke Balun
- The main function of the Ugly Balun is to help eliminate rf currents from flowing on the outside of coaxial cable using the principle of choke action.
[ Hits: 793 | Votes: 12 | Rating: 7.84 ]
- Cost-effective ferrite chokes and baluns
- In this article the author describes some new designs of ferrite loaded chokes for suppressing unwanted common mode currents at HF applied to feed lines like choke baluns, but also in the shack, applied to various coaxial, mains and data cables
[ Hits: 868 | Votes: 5 | Rating: 6 ]
- Common-mode chokes Measurements
- Common-mode chokes are useful solutions for RFI reduction. Winding a few turns of coaxial cable on the FT 240-31 toroid can reduced the noise below the received noise floor. In this article author measure different chokes
[ Hits: 156 | Votes: 1 | Rating: 8 ]
- miniVNA PRO Modifications
- The mini Radio Solutions miniVNA PRO is the only affordable vector network analyser (VNA) I know of that offers remote wireless operation.
This is very interesting because it allows to measure the input impedance of HF antennas installed at height without having to deal with coax cable lengths, baluns nor common mode suppression chokes.
However, to render the miniVNA PRO truly field proof, it requires a number of significant modifications.
[ Hits: 136 | Votes: 5 | Rating: 7.8 ]
Not satisfied ? Lookup Google Custom Search Engine for choke coax
Search choke coax with: Yahoo!, DuckDuckGo
, Bing
Search
Related Searches
You can try similar terms
coax choke choke rf choke rfi choke 1 to 1 choke balun rf choke designs antenna choke balun common mode choke common mode rf choke ferrite choke balun 213 coax coax coax 213 coax arm coax vhf
Get our links, Everywhere!
Follow us on Social Networks
|
RSS Feeds |
Sign up for daily Newsletter
Service provided by Google FeedBurner
Free for your Site
Add our gadgets to your site
Daily Top 10 links